I have a spreadsheet which contains a list of chemicals in Column A, and a list of numbers in Column B. The chemicals are separated into groups. I am trying to create a macro which sorts the chemicals in their groups by column B, so that the lowest number is at the top. I have 8 groups, and the number of lines in each group may vary, so I need to make the code dynamic.
I have attempted it. The way I thought it could be done was to search for the first group header, then save the address. Do the same for the next group header, then offset that by -1 row and 1 column, then sort using these two addresses as the range. The first part of the code works, where I find the address for both group headers, but everything after that doesn't work.
Sub Sort()
Dim CNMT(8) As String
Dim j As Integer
Dim fromRow As String
Dim toRow As String
Dim rng1 As Range
Dim rng2 As Range
CNMT(1) = "TPH Fractions"
CNMT(2) = "BTEX & MTBE"
CNMT(3) = "PAHs"
CNMT(4) = "VOCs"
CNMT(5) = "SVOCs"
CNMT(6) = "Metals"
CNMT(7) = "Inorganics"
CNMT(8) = "Pesticides"
For j = 1 To 8..................
I would like to create a list covering multiple columns. I would like to have 5 columns which will contain the same value/ (word). If I select,that value from the list, I would like to have each row the word is found be displayed regardless of which row it is found.
Attached is an example page. My goal is to be able to click on one of the header cells, and have it sort that column from high to low, and if I click that same cell have it sort from low to high. I know how to do this by making a command button, but, I want to do it by clicking on the cell itself. I just dont know how to do the onclick to execute the code.
Came across a spreadsheet that my firm created, where you can click on the column header and it automatically sorts ascending order for the column without messing up the other columns. Then if you double click it again, it will sort in reverse order.
I have two header rows on a sheet that I need to sort starting on Row 3, Column A.
The sheet is A-K and rows 1 and 2 are headers
Row 1 has merged cells of A-F which says "Information" and then G-K " Tracking Section" Row 2 is broken up into individual sub-headers in columns, A-K each one having a bit more info for instance:
Under the "Information" merged header in row 1 there is A2 Name B2 Work Center C2 C/O date D2 Due CC E2 Due MX F2 Date Received
and G-K in row 2 has different sub-headings.
I have tried to use my normal code, which is great for one header, but it ends up sorting the sub-header as I call it...
In the worksheet "Batting and Pitching Register", I'd like to be able to sort the data in the two charts (APBA Batting Register and APBA Pitching Register) by simply clicking on the cells in the respective header rows.
I've set up ranges (Batting and Pitching), but have had no luck moving beyond that.
In row 1 I want to have the names of servers, so we would have A C D E
Under each of those I want to have 4 other columns, so A would have on row 2 Start, End, Data, Time, or something like that.
Then B would have under it Start, End, Data, Time
And so on for C D ...
I would then want to sort it by the top level row, so if I had to insert B at the end I could sort it so it would be
A B C D E with all of the Start End Data and Time for the server to be moved along with it's master header.
I tried setting this up but then I went to sort it told me it could only sort if the columns were the same size, so having a merged top level A with four things under it did not work.
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
How would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
I have an issue with an export file which is produced in CSV format and needs to be aligned. I have attached a sample of what I refer to.
My Source excel file looks like:
ABC A-101 B - 202 DEF B-203 C - 100
The destination should align with the relevant column headers and place a blank if it doesn't match. Other have queried a similar thing, however my header and data and description is actually in the same cell with a dash separating them.
The output I want is:
A B C D ABC 101 202 DEF 203 100
There are multiple row of employees with varied column headings as its dependent on what system access the user has. The headings i.e. A,B,C for example is a fixed number of headers.
In my real data set the headers represents a 3 letter system prefix e.g. ZCR,ILP etc
find macros to sort fixed ranges but not an entire column with existing header rows from 1 to 4.
Added to that is the need to keep the code compatible with Excel 2003 even though I have Excel 2010 at office (it's a file that needs to be "openable" in both versions so the vb code needs to be in XL 03.
Column currently starts at C5 but goes down to C47, at this point. But it's a growing list. Some of the rows are blank at the bottom, too.
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
I am trying to search a range for all of the nonblank cells, when I find one, return the column header and the value in that column. Vlookup won't work on this. It will only return a specified column.
Employee performance
ID area one | two | three
12947 23 | | 19 12948 32 | | 20 12948 |17 | 52
What I am trying to do is create a communication sheet. Employee ID 12947, your performance in area one= ______, in area two = ______ and so on.
This is probably simple (I hope). But I'd like to create a list of Locations from a dynamic list on a separate sheet.
Sheet2!H2:H10000 has a list of Locations, with a LOT of repeats. Sheet1!A2:A100 is where I'd like to list the locations, without repeats.
Sheet1!A2:A100 is also used for a summary (in column B) and as a Data Validation point (for a list in G1)
The table on Sheet2 can vary from 0 items to 10,000 items and the number of different possible Locations is about to expand as it's resulted from a query to an Access database with filters.
I'm trying to sort a whole list of data that's been separated into blocks with a row containing the value "a" like:
row 9 a row 10 455 row 11 8892 row 12 34 row 13 a row 14 578 row 15 92 row 16 a
etc..
I want to sort each block into ascending order using VBA code and then add in some extra code to do some more analysis.
The data to be sorted is in Column D, and there are also values in Column C and B that need to be sorted with the Column D values (so that they stay in the same rows).
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
I am trying to sort a fairly long list of tasks into a custom calendar order. I have created the custom list as Sept, Oct, Nov, Dec, Jan etc through to Aug, with one additional heading of "Recurring". The list won't seem to sort by the column where these headings occur. See attachment.
Is it possible to sort numerous worksheets based off a list of cells that are the names of the worksheets within the same file? For example my worksheet names are:
YTD Texas YTD Florida Period Texas Period Florida
I can sort the sheets by alpha but it puts the two YTD worksheets together when I need the two Texas sheets side by side (I need this on a file that contains over 100 worksheets otherwise I would do it manually) I was wondering if I could create my order of sheet name in another worksheet and reference that list through vba code?
I am trying to get a list to sort automatically. I am running a competition over an 11 week period and entering weekly data that is totalled on a separate "Totals" sheet.
This "Totals" sheet, in turn, feeds a "Scores" sheet which I want to automatically sort in descending order of score in order to show the current positions in the competition.
The data in the list isn't entered directly but comes from formulas that reference cells in other workbooks.
I have found ways of sorting a list when you enter data into the list itself but what I need is a macro that will update the sort order automatically whenever a new value is entered in one of the other workbooks.
I have a large list of phrases, about 30,000 all in Col A. (From A3 to be exact)
What I want is to sort by number of characters. I know excel can sort A-Z,,, but I can't see by number of characters??
Is there anyway I can sort this list by No of Characters please??
List does include letters and numbers. But they are mainly 3-4 keyword phrases.
This is so from a large list all the least amount of characters will be at the top of the list so I can easily see them,, and probably delete most of the 1,2,3,4 character returned results.
sorry for restarting this thread but i started one similar on saturday and the person I was talking to has not yet responded
I want to know if it is possible to adjust this code line:
Case "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"
from the macro below to instead get the case names from a list on a worksheet... the reason for this is that the names of the worksheets I want sorted will change periodically.
Sub SortDaysoftheWeek() Dim ws As Worksheet For Each ws In ActiveWorkbook.Worksheets Select Case ws.Name Case "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday" With ws .Activate .Range("A6:G256").Sort Key1:=Range("A6"), Order1:=xlAscending, Header:= _ xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End With End Select Next ws End Sub
I need to create a custom sort which will cause entries "TBD" and blank to appear at the bottom of my spreadsheet. Any other value will be sorted alphabetically. I'm not sure how to create my sort list to do this. I tried "*, TBD " but this did not work.
