12 Monthly Data Values To Populate Series Of 365 Days
Jan 23, 2014
I have a series of 12 monthly data values:
1/31/19990.155375
2/28/19990.179262
3/31/19990.179392
4/30/19990.178993
5/31/19990.17128
6/30/19990.139678
7/31/19990.15518
8/31/19990.15536
9/30/19990.17732
10/31/19990.117725
11/30/19990.134171
12/31/19990.149113
and also a series of the 365 days that comprise these 12 months.
I need to populate each of the 365 days within this period (1/1/1999-12/31/1999) with its corresponding value for the month, i.e. 1/21/1999 (and all days in Jan) will take 0.155375 and 5/4/1999 (and all days in May) will take 0.17128.
How I should set out my data and which formulas I need to use?
View 8 Replies
ADVERTISEMENT
Mar 6, 2013
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
View 1 Replies
View Related
Jun 17, 2014
My excel sheet contains a set of date-marked expenditures. It's all one running list - no starting a new column for each month or anything like that.
I'd like to include a separate column/sheet showing total expenditure for each month. I've tried multiple formulae, along the lines of "Sum the B cells but only those for which the corresponding A cell is in the right value range". Or in programming terms, "for i from 1 to infinity, if x < A(i) < y, add B(i) to sum." Since other formulae on the sheet are independent of item ordering (don't require the data to be sorted chronologically), a plus would be if the solution can be, as well.
A separate thing I'd like to do (which I'm guessing has a similar solution) is to include grand (running) totals by expenditure type. A separate column of (non-numerical) expenditure codes is next to the data.
View 5 Replies
View Related
Aug 3, 2009
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
View 9 Replies
View Related
May 23, 2014
I have a sheet that has a start date and an end date for holidays.
The start date for the test holiday is 23/05/14
The end date for the test holiday is 15/7/14
I need a formula that will calculate how many of the holidays (work days only Mon-Fri) fall in each month from May through July.
View 14 Replies
View Related
May 22, 2014
I'm having some problems with the removal of duplicate values in a time series. The time series consist of stock data for about 10000 firms, but about 3000 of these firms died(delisted) before the end of the sample. The database I used to extract these data, however, does not remove the firm values from the sample, but keeps the last known value of the firm for the remainder of the time. Therefore, I need to remove these duplicate values, but only if they are sequential. Furthermore, normally if you remove duplicate values, excel will delete the cell and shift the data upwards, since it's a time-series I would rather have excel just blanking out the cell instead of removing it.
I've looked at normal solutions, like using the countif functionallity in excel, but this is not feasible because of the size of the worksheet, also, it does remove non-sequential duplicate values as well.
summary:
- Want to remove duplicate values, but only sequential values.( It's possible firm value is the same somewhere in the time period)
- The cells should be blanked out instead of deleted.
View 2 Replies
View Related
Mar 11, 2009
I have used the MAX function to populate the most recent date in a series.
-EX. the most recent date input into the cells S8, T8, U8 will populate in cell R8. There is a default value of 0-Jan-00 that automatically populates in cell R8 as a result of the MAX Function. Any value that is input into cell S8, T8, U8 will show in cell R8 immediately after being input as a result of the MAX Function.
I need cell R8 to remail blank until the last of cells S8 or T8 or U8 has been input (in no specific order). Once the last cell has been filled; it is only at that time I need cell R8 to show that most recent date input into any of cells S8 or T8 or U8. I can't hide the column, I need cell R8 to remain empty until the last of the three cells- S8, T8, U8 has been filled (the last cell filled will not always contain the largest value or most recent date).
View 5 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
May 19, 2009
Am attaching herewith one sample file. In the column G are the number of days as at 31-12-08. I want the value corresponding to that those days to populate in respective slot of days in either column H or I or J or K. E.g. stock number e (in cell A6) is having number of days 453, hence the value 110.920 (cell E6) should fall in cell J6. However i am want the single line formula which will validate in which cell the value should fall.
View 5 Replies
View Related
Sep 14, 2013
I need to create time sheets for about 30 contract workers.
Each time sheet needs to have their name as well the date for sunday of that week inserted into the form. (once the date for sunday is entered into the sheet, the rest of the dates for the week will be extrapolated out).
Then, once the data is inserted for a single worker, I need that file to be saved using the workers name in the file name.
The script would then open a new time sheet template, insert the second workers name and the date for sunday and save the file. Repeate for next 30 workers.
View 1 Replies
View Related
Oct 24, 2013
I have a data series running horizontally, which gives me monthly values e.g.
Jan 10 - Feb 12 - Mar 11 etc. Imagine the months are in row 2 beginning from column 2, and the values are in column 3.
I would like a formula which adds the three values, and in row 6 column two gives me the total for the quarter (10 + 12 + 11) and displays 33.
The next quarter value, I would like in row 6 column 3, etc.
View 5 Replies
View Related
Feb 1, 2013
I am trying to create an easy fill spreadsheet for a game. I am looking to have data values auto fill based off of the entry of 2 prior drop down menus.
I would like to have values for "Move", "Str", "Spd", "Skill", "Armor", and "Value" auto populate after the "Race" and "Role" has been selected. Data for these auto fills I have put on Sheet2 while the main file itself is on Sheet1.
If possible I would like to have Value increase by 5 for every level in "Rank" on the sheet.
View 1 Replies
View Related
Aug 3, 2009
the post 5 for the actual issue. This being my first post could not update it correctly. I have put my views int he 5th post which will be more clear.
View 9 Replies
View Related
Jul 7, 2014
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
View 2 Replies
View Related
Dec 27, 2013
I have a spreadsheet with the second tab hyperlinked to the first tab.
Tab 1
Bus
DEC '13
NOV '13
OCT '13
SEPT '13
AUG '13
[Code] ......
ERROR: Row 157, Aug '13
Here's the formula I used: =IF('End of Month'!L3>=0,('End of Month'!L3-'End of Month'!N3),IF('End of Month'!L3>0,('End of Month'!L3-'End of Month'!M3),(0)))
Should return value 339.
The formula should simply take the current month value and subtract it from the previous month value BUT if the value is zero, then it should go to the prior month and so on until it retrieves a positive value.
I've also tried to following formula without any success:
=IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!J3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!K3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!L3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!M3),
IF('End of Month'!H3=0,('End of Month'!N3-'End of Month'!O3),
IF('End of Month'!H3>0,('End of Month'!H3-'End of Month'!I3),(0)))))))
View 7 Replies
View Related
Aug 31, 2006
I have monthly a list of 2,500 people with an allowance value for each individual shown.
Problem I got is that sometimes there is more than one allowance entry for the individual in each month. I just need the total for the individual in that month. Each month is on a separate worksheet. I have been racking my head, but I can’t figure how I can look at the list of people (who have a unique number) and just total it.
View 9 Replies
View Related
Sep 23, 2009
I have a couple Sumifs formulas that I am trying to return monthly values for but there are small discrepancies on the values that they return. When I manually select the cells that I'm targeting with the formulas, I get a different value. I have checked the formulas 100x & can't figure out what is wrong with them.
Example:..............
View 2 Replies
View Related
Jun 16, 2009
Need the formula to multiply monthly values with a maximum value in any one period? The sample file attached explains it better.
View 2 Replies
View Related
Aug 27, 2013
I can't seem to figure out to easily aggregate & automate a series of weekly values (ie. forecast volumes by a specific part number) into vertical monthly summaries, by product.
Here's the before picture:
column A column B column C column D column E column F
Part num 1/1/2013 1/8/2013 1/15/2013 1/22/2013 1/29/2013A
100 100 100 100 100B
150 150 150 150 150C
200 200 200 200 200D
250 250 250 250 250
The output after manually doing this would look like this:
column A column B column CPart num Date QuantityA
Jan-2013 500B Jan-2013 750C Jan-2013 1000D Jan-2013 1250
View 5 Replies
View Related
May 26, 2014
i am trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
View 4 Replies
View Related
Dec 19, 2008
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
View 4 Replies
View Related
May 8, 2014
I have 12 observations per variable over 2013. At the end of each month I gathered the average value of X of said month. What I want to do is convert these observations to a list of weekly observations, where each week in January gets the value of the January observation
Example:
Month123456789101112
Value 2345678910111213
And get it like:
Week Value
1 2
2 2
3 2
4 2
5 2
6 3
7 3
and so on.
Since I've got a lot of variables I'd like to use some kind of formula.
View 11 Replies
View Related
May 28, 2008
I'd like a formula to be inserted in cell A4 that returns all products listed in row 1 that have FALSE in row 2. Is this possible? I tried a HLOOKUP and a MATCH yet it wasn't returning all occurances
View 9 Replies
View Related
May 19, 2013
I have a VBA module in Access that extracts data and copies to an Excel spreadsheet. Every time I run the code additional data is extracted and displayed on a chart together with previous data. When I enter values to the series collection the first axis be it X or Y is entered correctly but the second axis produces error 1004 'unable to set XValues property of the series class' If I swap the lines of code around the error switches to 'Values' (y axis)
wchart.SeriesCollection(NoCurves).Values = wsheet.Cells(9, 3 + (3 * (NoCurves - 1)))
wchart.SeriesCollection(NoCurves).XValues = wsheet.Cells(8, 3 + (3 * (NoCurves - 1)))wsheet.Cells(a, b))
wchart.SeriesCollection(NoCurves).Name = wsheet.Range(Cells(6, 2 + (3 * (NoCurves - 1))), Cells(7, 2 + (3 * (NoCurves - 1))))
View 2 Replies
View Related
Apr 28, 2009
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies
View Related
May 9, 2012
I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
View 2 Replies
View Related
Jul 31, 2012
I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies
View Related
Aug 19, 2009
what I am trying to do:
I have a workbook with 2 sheets.
Sheet "A" has a column called "FILEPATH" that contains the complete path to a file (eg. "C:mystuffdocumentsdocA.pdf"). There are about 3500 rows of filepaths on this sheet.
Sheet "B" has a column called "DELETED FILES" that contains a list of deleted filenames (eg. docA.pdf, docC.pdf, etc.), one filename in each cell.
I want to highlight the rows on Sheet "A" that contain a path to a file that is listed as deleted on Sheet "B".
View 9 Replies
View Related
Jan 27, 2014
I am trying to convert quarterly data to monthly
The quarterly data columns go: Mar-14, Jun-14 etc
The monthly data columns goes Jan-14, Feb-14 etc
I am trying to use a vlookup and match formula but as you will see in the attached file it is only working for those months that are labelled in both data e.g. March 14, June 14
Is there a formula that will pick up for example that January and February numbers should be drawn from the March 14 quarter, April and May from June quarter etc?
View 2 Replies
View Related
Jan 31, 2014
I have a table which has the following columns:
Date - Data1 - Data2 - OtherData1 - OtherData2
I came up with some formulas to count my data monthly. I have 12 tables with this kind of formula in it:
[Code] ....
Where B12 is the year and A213 is my month number. My first try on the "date filter" looked like that:
[Code] .........
And it wasn't working so I thought it was because the 31 wasn't a good idea for non-31-days-months but none of the formulas above are working.
(BTW, IDK why it's not working but I have data in my table for months 10, 11 and 12 and the only calculation tables that are calculating data are the ones for months 9 and 10. The results are the same in these two tables and are counting all my Table1[Data1] and [Data2] (the count is not monthly))
View 7 Replies
View Related
