I have a couple Sumifs formulas that I am trying to return monthly values for but there are small discrepancies on the values that they return. When I manually select the cells that I'm targeting with the formulas, I get a different value. I have checked the formulas 100x & can't figure out what is wrong with them.
Example:..............
I have a spreadsheet with the second tab hyperlinked to the first tab.
Tab 1
Bus
DEC '13
NOV '13
OCT '13
SEPT '13
AUG '13
[Code] ......
ERROR: Row 157, Aug '13
Here's the formula I used: =IF('End of Month'!L3>=0,('End of Month'!L3-'End of Month'!N3),IF('End of Month'!L3>0,('End of Month'!L3-'End of Month'!M3),(0)))
Should return value 339.
The formula should simply take the current month value and subtract it from the previous month value BUT if the value is zero, then it should go to the prior month and so on until it retrieves a positive value.
I've also tried to following formula without any success:
=IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!J3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!K3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!L3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!M3),
IF('End of Month'!H3=0,('End of Month'!N3-'End of Month'!O3),
IF('End of Month'!H3>0,('End of Month'!H3-'End of Month'!I3),(0)))))))
=AVERAGEIFS($D$106:$D$2825,$D$106:$D$2825,">"&$I117,$D$106:$D$2825,"<"&$J117)
Returns = 0
But on a copy of the same worksheet, the same formula returns the correct value. Is there something wrong with my formula cotext?
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
Shortened for example;
I have created a drop down list with gas, groceries and travel as the categories.
column a is labeled expenses and formatted as currency.
column b is labeled category with the drop down list in each cell.
column d contains each item, gas, groceries and travel on separate rows.
column e will contain the total for each item in column d using "sumifs formula".
If there are no travel expenses, instead of returning $0.00 I want the cell to be blank.
I know how to do this in a simple sum function but sumifs are sumthin else.
I have tried using <> for not equal to and everything else I can think of and I usually get a VALUE error.
how do I get it to be blank instead of $0.00???
I am trying to work out a formula to return a sum based on 2 variable, but one of the variables in in a column and one in a row, anyway I can do this?
I don't want a normal sumif returning the relevant column as the relevant column will change based on a cell that can change.
I basically have a list of products sold (products listed down the page) by month (month listed across the page), I want to sum all the products in a particular month on a separate tab (both product and month can be changed).
I am trying to get excel to return the MAX number of a range of numbers that have multiple if criteria.
Here is some sample data with the final product:
COLUMN A
COLUMN B
COLUMN C
FINAL PRODUCT
x
a
3
7
x
b
5
7
x
a
4
7
y
a
10
15
y
b
15
15
y
a
2
15
I'm trying to set up my formula so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
(I recommend skipping the below text and just opening the attached spreadsheet, instructions/what I'm looking for and trying to achieve and well laid out requirements and examples are in the spreadsheet and much more thoroughly explained then I can do below)
I'm setting up a table that grabs data from columns in a raw data spreadsheet.
For the purpose of the table I'm making, the formula needs to match up both the House, and the year/month from the raw data sheet, then if the two match and are side by side, return the value to the right either in the Plan Field or the actuals field depending on which field in the table the formula is in. If there is no entry or matching criteria for both the house and Month then it should leave the cell blank, not show a 0
So I have a SUMIFS formula that I'm trying to set up so that if there is no criteria match it leaves the cell blank.
So =SUMIFS(sum range, criteria& range, criteria&range), if no matching criteria can be found, leave cell blank, else if matching criteria found then return value from the sumrange.
This is the exact formula I am using:
=SUMIFS(INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$B9, 'Raw Data'!$1:$1, 0)), INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$A$8, 'Raw Data'!$1:$1, 0)), Table!$A$9, INDEX('Raw Data'!$1:$1048576, 0, MATCH(Table!$B$8, 'Raw Data'!$1:$1, 0)), TEXT(Table!C$8, "yyyymm"))
Yeah kind of hard to follow, so attached is a very detailed and well laid out spreadsheet showing the example of what the formula is, how it's working/what it's returning and an example of what i want it to return/look like, so please check out the spreadsheet, it explains it a million times better.
Essentially though i want the formula set up so that if there is no criteria match, rather than returning 0 it leaves the cell blank.
I have a data series running horizontally, which gives me monthly values e.g.
Jan 10 - Feb 12 - Mar 11 etc. Imagine the months are in row 2 beginning from column 2, and the values are in column 3.
I would like a formula which adds the three values, and in row 6 column two gives me the total for the quarter (10 + 12 + 11) and displays 33.
The next quarter value, I would like in row 6 column 3, etc.
I am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
I have monthly a list of 2,500 people with an allowance value for each individual shown.
Problem I got is that sometimes there is more than one allowance entry for the individual in each month. I just need the total for the individual in that month. Each month is on a separate worksheet. I have been racking my head, but I can’t figure how I can look at the list of people (who have a unique number) and just total it.
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
My excel sheet contains a set of date-marked expenditures. It's all one running list - no starting a new column for each month or anything like that.
I'd like to include a separate column/sheet showing total expenditure for each month. I've tried multiple formulae, along the lines of "Sum the B cells but only those for which the corresponding A cell is in the right value range". Or in programming terms, "for i from 1 to infinity, if x < A(i) < y, add B(i) to sum." Since other formulae on the sheet are independent of item ordering (don't require the data to be sorted chronologically), a plus would be if the solution can be, as well.
A separate thing I'd like to do (which I'm guessing has a similar solution) is to include grand (running) totals by expenditure type. A separate column of (non-numerical) expenditure codes is next to the data.
I have a series of 12 monthly data values:
1/31/19990.155375
2/28/19990.179262
3/31/19990.179392
4/30/19990.178993
5/31/19990.17128
6/30/19990.139678
7/31/19990.15518
8/31/19990.15536
9/30/19990.17732
10/31/19990.117725
11/30/19990.134171
12/31/19990.149113
and also a series of the 365 days that comprise these 12 months.
I need to populate each of the 365 days within this period (1/1/1999-12/31/1999) with its corresponding value for the month, i.e. 1/21/1999 (and all days in Jan) will take 0.155375 and 5/4/1999 (and all days in May) will take 0.17128.
How I should set out my data and which formulas I need to use?
Need the formula to multiply monthly values with a maximum value in any one period? The sample file attached explains it better.
View 2 Replies View RelatedI can't seem to figure out to easily aggregate & automate a series of weekly values (ie. forecast volumes by a specific part number) into vertical monthly summaries, by product.
Here's the before picture:
column A column B column C column D column E column F
Part num 1/1/2013 1/8/2013 1/15/2013 1/22/2013 1/29/2013A
100 100 100 100 100B
150 150 150 150 150C
200 200 200 200 200D
250 250 250 250 250
The output after manually doing this would look like this:
column A column B column CPart num Date QuantityA
Jan-2013 500B Jan-2013 750C Jan-2013 1000D Jan-2013 1250
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
I have a list of eastings and northings for specific incidents, then in a seperate sheet I have a list of eastings and northings for postcodes.
What I want to end up with, is which postcode the incidents are in!
So it means getting Excel to find the closest match of two values to two other values and return a corresponding value.
Here's what it looks like!
Incident Easting Northing
01 437302 113607
02 437340 113673
03 437366 113701
04 437366 113701
05 437474 113581
Postcode Easting Northing
SP410TQ 430449 91321
SP410PY 429158 91339
SP410QB 429258 91375
SP410PZ 429288 91407
SP410EA 428940 91444
I want to end up with
Incident Postcode
01 SP7185H
etc etc.
I have used several IF and AND functions in the past in order to check to see if 2 values = true and return a third.
(for example =IF(AND(A1>10,B1<20),C1,"")
However I can't seem to figure out the senario below.
I have 2 coulmns, Column A has dates and Column B has a numeric value
I need to check to see if column A falls between 2 dates and returns the sum of column B
For example if have 100 rows and 10 of those rows have dates that fall between 06/01/09 and 07/01/09 then add up column b for those 10 rows and return the value.
i have a formula that looks up data from a pivot table....the pivot relates to a data request log and a pricing request log - both separate. the data request log and pricing request log includes data and pricing activities....some are only data, some only pricing, a few are both - each activity has its own unique request number - if both data and pricing then the request number will be the same
so the pivot looks up a request number eg F1.....it counts how many actions there are for this request number (eg request F1 may have 6 actions) and displays this number. eg F1 data only request....6 actions.....no pricing activities/request...the pivot will display 6 under the column Data but then returns the value #N/A under the column pricing if no actions/request found for pricing...i want this to return "blank" if there are no actions/request found under either pricing or data. the formula used is as follows:
under the column named data:
=VLOOKUP(J7,'DATA PIVOT'!A7:D150,3,FALSE)
under the column named pricing:
=VLOOKUP(J7,'PRICING PIVOT'!A7:D150,3,FALSE)
i think that because FALSE is used this returns the value #N/A?
Returning Descending Values
I currently use the following to find the max number is a column:
=MAX($P$4:$P$65536). If I wanted to find the second highest, then the third highest, etc.. how would this be written?
it seems that excel is deciding what type of array this is by evaluating the type of the first cell in each column and applying this type to the rest of the array's column. Problem is that i want all values to be brought in, text and numerical.
Dim VArray As Variant
Sub DA201()
If FileThere(Path & "DA201.xls") Then
GetDataTowers Path & "DA201.XLS", "", "DataRange", Sheets _("Towers").Range("CStart"), False, False
Else
MsgBox ("File DA201.xls not found. Click OK to continue")
End If
End Sub
Public Sub GetDataTowers(SourceFile As Variant, SourceSheet As String, SourceRange As String, TargetRange As Range, Header As Boolean, UseHeaderRow As Boolean)
Dim rsCon As Object
Dim rsData As Object
Dim szConnect As String
Dim szSQL As String
Dim n As Integer
Dim row, m As Integer
If Val(Application.Version) < 12 Then
szConnect = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=" & SourceFile & ";" & _
"Extended Properties=""Excel 8.0;HDR=No"";"
Else....................................
I have been able to get the following code to work (which simply returns the start of data on a sheet):
Sub FindDataStart( )
Dim lRow As Long
Dim lColumn As Integer
For lRow = 1 To Rows.Count
For lColumn = 1 To Columns.Count
If Trim( Cells(lRow, lColumn).Value) <> "" Then
Goto EXIST
Else
End If
Next lColumn
Next lRow
EXIST:
Exit Sub
End Sub
Now I want to build on what I have learned so far and from another Sub, I want to call the FindDataStart sub and have it return the row and column # (from where the data starts).
I started by making the following changes to the FindDataStart sub but got stuck
Changed :
Sub FindDataStart( )
To:
Sub FindDataStart( RowNumb As Long, ColNumb As Integer)
I also added the following line to the end of the FindDataStart sub
FindDataStart = (lRow, lColumn)
In the attached example I paste in a report from another system into Sheet2 (rough data layout in example).
In column B in Sheet1 I have tried using Match and Index formulas to try and return only the Local Shipment figures from on Sheet2 for each staff member.
The issue i'm having is that the data in Sheet2 can change based on how long the report is run. There is also no way I can change the way the raw data is set out in Sheet2 as it's an external system.
Basically i'm looking for a formula that isn't locked down to certain cells and can work with data moving up and down columns at different stages. The key data never changes from column A and F in sheet2. But what does change is whether each person has one or both of Sales & Local Shipment data in the reporting. This obviously changes based on what is completed each day.
So I need a formula that matches the persons name in column A in Sheet1 with Column A in Sheet2, then looks for the first mention of 'Local Shipment' below it and returns the cloumn F value which is in the same row as 'Local Shipment'.
I have a set of cells and i want it to return all of the distinct or unique values within that matrix. for example, lets say this table charts how many sales an employee makes in a week.
sun mon tues weds thurs fri sat
john doe 1 0 3 2 3 0 0
jane doe 0 8 0 1 0 7 0
james doe 3 3 2 3 2 1 1
the desired output would be: 0,1,2,3,7,8
I don't want to be copying all of the cells or doing a lot of manipulation - i know i can copy, sort, and get unique values that way - i want a formula where as i plug in values, this field is updated to include all of the distinct or unique values.
I have a table of data-
IDDescriptionDatePax Count
316COACH01/07/20135
323COACH3/07/201410
324COACH18/07/20141
325COACH20/08/201420
333COACH21/09/201445
345COACH22/09/20143
351COACH23/09/20143
362COACH21/10/20142
371COACH22/11/20142
394COACH23/12/20140
416COACH23/12/201418
422COACH23/12/201439
Example, the real data is about 38,000 entries. I want to build a query to return the value of Column D (pax count) based on the values of Columns A (ID) and C (Date)
This would feed into a second, ID specific table, like this-
ID 536 Bookings JULY 2013
1/07/20132/07/20133/07/20134/07/20135/07/20136/07/20137/07/2013
(value) (value) (value) (value) (value) (value) (value)
SUMPRODUCT, usually my mainstay, is for some reason letting me down, returning a value of 0 for everything irrespective.
How the following problem gets sorted out
ColumnAColumnB ColumnEColumnF
33rohan55
44tata55
55dev44
55rony33
As you can see from above i want to lookup all the values in column E in column A and return the corresponding value in column F.
Trying to pull data from one workbook to another using Vlookup.
The worksheet has 7 columns (date, day of week, time or arrival, package, departure time, patron count and group name) I would like to pull all the data for a specific date in a seperate workbook.
I know I require a nested formula but cannot seem to get the variables correct:
I have two tabs (In-Transit) & (AC) column A in both sheet have a "Concatenate" that i copied and pasted and values only and also switch the format to "Text" on both tabs. I do a vlookup
[Code] ......
and it returns the results i want....But then i was thinking due to the volume of data what if the value in column A is found twice on tab "AC".. i wouldn't know with a "Vlookup".
So trying to build a Index/Match formula
[Code] ....
I also returns some good results, but i also get some back as #REF. I also get #NA and both of the formulas and those are valid no matches...
I want to return the proper value from sheet 2 into column C in sheet one. I have the current formula set up as an array but I only get the value that matches the first row in Sheet 2.
HTML Column A Column B Column C
Date Number Who
3/23/2007 902-555-2596=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-123-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-123-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-678-0352=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 980-555-6621=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
3/23/2007 902-555-7958=IF($B2=Sheet2!$A$2:$A$2001,Sheet2!$B$2:$B$2001,)
~~~~~~~~~~~ Sheet 2 ~~~~~~~~~~~~~~~~~
Column A Column B
902-555-7958Big Bird
902-555-5100Daffy Duck
902-678-0352Elmo
902-555-5752Donald Duck
902-555-7420Bert
980-123-6621Ernie
902-555-2596Grover