I have three sets of columns with addresses. I'm looking for a match/index/vlook up formula that can search all three columns and list the matched addresses in another column. Also note that one or two of the columns are formatted differently (although there is enough information to match closely to the other columns where relevant).
View 2 RepliesI am struggling with a INDEX,MATCH and MAX formula. I am trying to retrieve values from column E with two criteria:
1. That the value in column C is equal to a lookup value
2. That the date in column A is the closest before date for a lookup date
I have attached an example file.
I have a sheet of pump test results, placed in rows, where the test rig is set at a specific speeds and flow and it records pressure. At each stage of the test a number of snapshots will be taken (Usually between 3-5 at each stage), so I have 3-5 rows of very similar data. I only need to use the best row from the selection available, so I am hoping to find a formula or code (Don't care which) that can look at the results and select the row of readings where the speed AND the flow are closest to the targetted data.
For example: In cells G6:G8 I have flow result values 0.129, 0.151, 0.156 and in H6:H8 I have speed result values 72.536, 71.82, 72.13. These are actuals. In cell N6 I have the target speed (75) and in O6 I have flow target (0.15), but these could be moved anywhere to suit really. What I was hoping to do, but am struggling big time, was to just flag up the row of readings where these two values are closest to the targets by placing a check mark in column L:L which I have formatted in monotype sorts and would like to place a "4" (Which gives me a check mark) on the 'best' row. From that I can do more with some simple IF statements.
Is this feasible, or am I trying to do something beyond Excels capability, it is certainly beyond mine at the moment. I was looking at the check mark method, but that is not essential, so if anyone has any suggestions on an alternative means of identifying the best row of data, that might make it easier to do, then I am listening.
I am trying to write a formula which finds the last instance of a number greater than 30 in a column (B). The values are not sorted from smallest to largest as they correspond to a time series (A) which needs to be preserved. Ultimately, I want the formula to return the time at which this value occurs, but I think I can do that bit using INDEX
I have a formula to give the first instance (row number) of a number above 30, which seems to work, but beacuse I don't fully understand how it works I can't modify it to give the last instance. The formula is:
=MATCH(1,INDEX(--(B2:B883>=30),0),0)
Having only just learnt how to use MATCH and INDEX, I thought each should have 3 arguments, so I'm confused about how the 4 arguments here work. Also I can't find much on using logic functions within INDEX. Can someone explain this formula, and suggest how I might go about finding the last instance please?
I am new to VBA and am having difficulties in getting a find function to successfully locate search criteria within cell. When the search criteria matches exactly that of the cell contents then the code works; however should the search criteria only form part of the total cell contents (such as a seach for "the" in a cell containing "the cat sat on the mat") the code doesn't recognise it.
Essentially, I need the code to search a range for the required string and if found within a cell activate that cell and populate a combobox with the full cell contents of the activecell.offset(0,-2).
The relevant section of code attached below:
Dim role_count as range
Dim role as string
If Application.WorksheetFunction.CountIf(Range("Role_Count"), Role) 0 Then
Range("role_count").Select
Selection.Find(What:=Role, After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
Me.Controls(ComboBoxName) = ActiveCell.Offset(0, -2).Value
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
Is there a way to provide filter with a list of criteria but when it doesnt match all of the criteria it still uses the filter on the criteria that it does match?
E.g i have this code
ActiveSheet.Range("$A$7:$N$31997").AutoFilter Field:=1, Criteria1:=Array( _
"A", "B", "D", "E", "H", "I", "R"), Operator:=xlFilterValues
However sometimes for example B will be missing, or H or B H I will be missing etc... is there a way to provide all of the criteria and it will not error if the criteria is not all there?
I have a list of data that has (Col A) item, (Col B) lot# and (Col C) quantity. In Columns DEF I have the same but column E (Lot#) is blank. Is there a formula I can use that would match Item and Quantity (A and C) with (D and F) and then drop the Lot # form column B into column E if there is a match?
Item
lot
Amt
Items
Lot #s
Yds
10429.50.0
N49950
2.5
0201.019FLAME.0
T37530
9
[code]....
I'm using the below VBA
Dim c, DataRow
With Data
Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues)
If Not c Is Nothing Then
DataRow = c.Row
End If
End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London
Favourite Hotel - Cardiff
Favourite Hotel
Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
How do i make it search for an exact match?
Col B is a range B2:B200 Col C is a range C2:C200 Col D is a range D2:D11, Col B contains any number from 1-10 Col C contains any number from 1-100 Col D will contain the sum of the occurences when the value in C equals 98 or 100. For instance if in Col B the number 9 occurs 17 times and the corresponding cell in col C is 98 or 100 for 6 of those times then in D10 I would hope to see the value 6. Thus far my hopes have been dashed to pieces against an insurmountable wall of error codes!
View 3 Replies View RelatedMatch 3 criteria. I'm a relative newbie to coding having a bit of difficulty with the following formula:
View 4 Replies View RelatedLet's say I have the following situation:
Column A has values 1-15, each repeated many times. I want a match function to return all the row numbers for which column A is a 3 or a 4. (It's within an index function (which is with a standard deviation function), so not sure how I could match twice and not break my higher level nested functions).
I am trying to match 3 values, and return a matching 4th from a chart. It will first look at one value and see if it falls between values (the LOAD value in cell B1..it will look to see if it falls between the "low limit" and "high limit" in columns A10 to A135 and C10 to C135, respectively. Then it will look for a match for the values in cell A2, and in cell A3. the return value will index to the corresponding value in column G10 to G135. I have written a formula to do this in cell D2....but it will only ever return the value in cell G10.
See the attached excel file : nozzle tester.xlsx
Screenshot1.JPG
Screenshot2.JPG
So basically, I have these two sets of data in 2 separate tabs. I need the 2 sets of data circled in green that match to bring up data circled in red.
How would I go about doing this?
Rather than attempt to describe my problem here and risk cofusing people on what I want to achieve I have put a diagram together. I think this is the best way to illustrate my problem.
Diagram is available here
[url]
There is also a copy of the document available here for any body willing to take a look.
[url]
Please bare in mind I need this doc to be compatible with the 2003 version of Excel.
I have been trying for the last 2 hours to write a formula that does the following;
If a number appears in this table (on another worksheet named VAT Codes) then return VAT but if it appears in this table (on another worksheet named VAT Codes) then return NO VAT. The following formula returns VAT but N/A when it should say NO VAT; =IF(F3="","",IF(MATCH(F3,'VAT Codes'!$I$7:$I$19,FALSE),"VAT",IF(MATCH(F3,'VAT Codes'!$K$7:$K$143,FALSE),"NO VAT","")))
I tried to use SUMIFS and VLOOKUPS to resolve the problem, but it didn't work out too well.
View 7 Replies View RelatedI'm looking for another twisted forumla / array. Here's what I'm trying to do?
When the value in data!G$2:G$51000 = Yes
AND
The value in data!J$2:J$51000 is Unique (counted once if more than 1 total matches)
AND
The value in data!H$2:H$51000 is
I am trying to create a summary sheet in excel and i am in need of a formula which gives me a summary in Sheet 2.
i.e. Match column A2:A19 with F2:F19 and give me the total in Sheet 02 with date and reason.
Sheet 01
In no
In Date
In Sector
STA
ATA
Out
OutDate
Out Sector
STD
ATD
Total
Reason
[Code] .......
Expected result in Sheet 02
Flt No
Date
Reason
AB318
AB300
AB030
AB420
AB484
[Code] .....
what is the cell address whith column criteria MATCH to:
column1 = "A"
column2 = "B"
column3 = "C"
AND...
with header criteria MATCH = "ZZZ"
I have a userform that collects production data from several production lines each running up to 4 shifts every day. This populates a table for performance related calculations to be applied.
Each day I must produce a report for each line and shift showing the performance stats I have calculated. the format of the report has been defined for me and I'm not allowed to change it at the moment.
I wrote a line of code to be applied to each cell I wanted to show the data in excel 2007 but this doesn't work in 2002 which is the version in our office and I'm hitting my head against a brick wall.
Essentially the report will either use Now() or get the user to enter a date, then I need to search for the unique reference that meets the date, the line and the shift and return several values in the report from the row in my "daily data" table.
Here is the code I have so far - it returns a "VALUE" error...
=INDEX('Daily Data'!A6000:AA6000,,19,MATCH($B$2&"Line "&$A$6&B6,'Daily Data'!$F6000:$F6000&'Daily Data'!$H6000:$H6000&'Daily Data'!$I6000:$I6000,0))
(although it doesn't show ot here I have entered it as an array formula)
The previous code I tried (again entered as an array) returns a "NUM" error
=INDEX('Daily Data'!A:AA,,19,MATCH($B$2&"Line "&$A$6&B6,'Daily Data'!$F:$F&'Daily Data'!$H:$H&'Daily Data'!$I:$I,0))
B2 is date (dd/mm/yyy)
A6 is line number (numeric)
B6 is shift (alpha)
I have 2 rows of data and want excel to find the number of times that a number appears in the first row and then return the value of a cell in the same column but in the second row of data. I need it to repeat this until all matches in row one, and their corresponding number in row 2 have been found and then add all the results from row 2 together to give a single numerical answer. I have tried the ' lookup' function but this only returns the first number that matches the criteria and does not continue to find the remaining matches.
View 7 Replies View RelatedI am trying to return a reference to the first cell that meets several conditions. I can calculate a column (say Col E) that tells if each row meets condition with
=IF(AND(IF('number of cases by year'!B28:B547>'cumulative distribution >0 '!F51,TRUE,FALSE),IF('number of cases by year'!$A$2:$A$521>=DATE('% of cases captured'!$C$3,'% of cases captured'!$A$3,'% of cases captured'!$B$3),TRUE,FALSE)),TRUE,FALSE)
Then to find the first time this is met I use
=MATCH(TRUE,INDEX(E2:E521,0),0)
Is there a way to do this all in one step? I tried
=MATCH(TRUE,INDEX(IF(AND(IF('number of cases by year'!B20:B539>'cumulative distribution >0 '!F43,TRUE,FALSE),IF('number of cases by year'!$A$2:$A$521>=DATE('% of cases captured'!$C$3,'% of cases captured'!$A$3,'% of cases captured'!$B$3),TRUE,FALSE)),TRUE,FALSE),0),0)
but it does not seem to work. It returns #VALUE
I am needing a formula to sum info from 1 book to another based on two lookup criteria. Its the sort of info you can easily get with pivot tables or filters but my colleague needs a copy and pastable formula so it can be automated.
There are two workbooks Order Index example.xlsxCash Flow book example.xlsx; one called "Order Index" has a list of orders placed along with supplier name (Col C), date due for payment (Col H) and value of order (Col I). The other workbook, used by a colleague is called "Cash Flow" and contains a list of supplier names (Col B) with row 1 containing months (1st Jan 2014, 1st Feb 2014 etc).
Under each month on the "Cash Flow", I need to show the sum of orders due for payment within that month, for each supplier named (in Col B). In other words, sum the figures from the "Order Index" based on supplier name and date due for payment.
Often, on the Order Index there is more than one order per month from a supplier and the dates due are specific days (10th Jan, 21st Jan etc) and these need summing up for the 1st Jan 2014 Column in the Cash Flow book.
I've attached a sheet with the problem.
I have one sheet which summarises the status of documents in another sheet. I'm using INDEX and MATCH to return the correct Document title and info. But I need to offset/countif/INDEX MATCH again or something to get to reference the latest revision status of the document.
I am making a table that reads from an list of employees. I have attached a sample sheet (changed the names). The list includes Name, 2014 Start Date, Pay Type, Job Title, Location, Weeks, Hours, Avg. Hours.
I need a formula that will list employees on a separate sheet based on the following criteria:
2014 Start Date = 1/1/2014
Avg. Hours >=30
I have worked with a number of INDEX MATCH combinations but I cannot get the formula to quit at 30 Avg. Hours whenever I drag the formula down. I also have seen some employees that average over 30 hours get "skipped" over whenever I drag the formula down.
I have a spreadsheet that holds salary information. At the moment it shows against each person the highest salary for a person of the opposite ***. What I would like to do is have another cell that shows the names of all people who have that salary.
E.g. if the highest comparable salary for someone of the opposite *** is 30000 then I would want a list of all the people with that salary.
Is it possible to do a look up that would show all the results that match certain criteria?
On sheet one, I am trying to match the employees job code for that particular week in cell K2. The vlookup/match is trying to find the particular job code for that employee number for that particular week ending.
Cell A2 (sheet 1, shows their employee #),
Cell J2 (sheet 1) has that particular week ending.
Cell K2 has this formula in sheet 1:
=VLOOKUP(A2,Sheet2!A:C,3,MATCH(J2,Sheet2!$D$1:$D$5,0))
Sheet 2
Column A = employee numbers
Column C = job codes (which I need to appear in cell K2 for sheet 1)
Column D = has the week endings to match against column J in sheet 1
In the attached workbook, the following formula appears in column B of the "dropdown" tab. I want to basically do a two criteria lookup, using the values in column A and the value of cell B1, which is a dropdown based on a dynamic range consisting of the company names on the Discounts tab.(starting with cell E1, extending rightward) To make this easier for testing purposes, I'm curretly using cell E1 instead of B1, which is just text.
It seems like this ought to work, but somehow it doesn't:
=OFFSET(Discounts!$B$1,(MATCH($E$1,Discounts!$C$1:$AA$1,0)),(MATCH(A5,Discounts!$B$2:$B$200,0)),1,1)