Add Event Code To New Worksheet

Oct 3, 2007

I'm having trouble copying a macro to a newly created sheet. I do like this:

ThisWorkbook.VBProject.VBComponents("Kopier1").Export filNavn

For Each kopSheet In ThisWorkbook.Worksheets
If Left(kopSheet. Name, 8) = "Inddata-" Then
kopSheet.Copy
ActiveWorkbook. SaveAs ThisWorkbook.Path & "" & kopSheet.Name
ThisWorkbook.VBProject.VBComponents("Kopier1").Export filNavn
Workbooks(kopSheet.Name & ".xls").VBProject.VBComponents. Import filNavn
ActiveWorkbook.Close
End If
Next kopSheet

I copy 6 sheets, named "Inddata-*", and i wan't to copy a module named "Kopier1" with it. I know that i can use an add-in, but that is unfortunately not a good idea in this project. It does export the module "Kopier1", but, it doesn't import it to the newly created workbook!

View 2 Replies


ADVERTISEMENT

VBA Code To Add Event To New Worksheet

Feb 27, 2008

I need to to use VBA to copy a worksheet (which i've managed to do!), but I need the new worksheet to have a Worksheet_Change event. Now when I copy the worksheet, the event doesn't copy over (obviously as its a cut and paste jobby). Any ideas on what code I need to add in the Worksheet_Change event just after the new worksheet is automatically created?

View 14 Replies View Related

VBA For Worksheet Event Code

Jan 17, 2007

I have seen many examples posted here that are close to what I need, but I am not experienced at writing code, so I am not sure how to make the changes to this code that apply to what I need. So I will try to explain what I am looking for & hopefully not be too long winded:

I have an excel workbook that has several worksheets within it - 10 of the worksheets are identical as far as the formulas that are in each of the cells, however, they are all VLOOKUP cells that refer to another excel workbook (used as a "database")which lists all of our projects - there is a cell in each of the 10 sheets that can be changed that will allow that particular worksheet to access the information in the "database worksheet" for the particular project name that is entered in this cell.

There is currently an event worksheet code for each of these worksheets which allows for a picture to be displayed "floating" above cell (L13) based on the project name that is showing in this cell- however it is based on all of the project pictures "living" in each worksheet (the picture that is called up by the project name is displayed while the rest are hidden - as per the formula)- the code is shown below:
Option Explicit

Private Sub Worksheet_Calculate()
Dim oPic As Picture
Me.Pictures.Visible = False
With Range("L13")
For Each oPic In Me.Pictures
If oPic.Name = .Text Then
oPic.Visible = True
oPic.Top = .Top
oPic.Left = .Left
Exit For
End If
Next oPic
End With
End Sub

However - this option works fine when there are 5 or 10 pictures/projects - but we are looking to grow our project database. So, I was hoping to be able to store the pictures in another location (such as another worksheet or in a file on the server - I would also appreciate input if anyone has an opinion on which would work better?) and have some type of worksheet event code that can be written in to each worksheet that would access the picture in this "central" location and have them appear in cell (L13) of each worksheet based on the project name displayed.

View 9 Replies View Related

Add Code To Worksheet Event Using VBA

Jan 26, 2010

i need to add a DoubleClick event to about 40 workbooks.
each has 6 sheets and the code will be added to two of them.

i can cycle thru the folders/subfolders and open the correct files.
but how do i put the code into the specific sheets using a program?

View 9 Replies View Related

Add New Worksheet With Event Code

Aug 20, 2007

Is it possible to copy a "Worksheet_change event" macro to a new worksheet by macro? Like when I insert a new worksheet, a certain macro, for example "run macro on data entry", to be already written in its worksheet_change event.

View 7 Replies View Related

Determine If Worksheet CommandButton Fired Event Code

Apr 20, 2008

When I click on a commandbutton20 on sheet1 it moves the user from sheet1 to sheet2, hides some columns & formats the height of a row in a range of cells I will refer to as Area X. On sheet 2 I have a target condition that if the user clicks on any part of Area X it move the cursor to cell C8. What I want to accomplish is that if commandbutton20 in clicked, the target condition is suspended. otherwise the target condition works. The code I wrote is as follows. What happens when I press F5 to execute it... a macro window pops up.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("a1:x3,e4:x6")) Is Nothing Then
If Worksheets(1).CommandButton20_Click() = True Then
Exit Sub
Else: Range("c8").Select
End If
End If
End Sub

View 3 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

2002 Code V 97 Code: Add A Small Workbook Open Event Code Which Works For Me But Debugs For The Others

Jan 27, 2009

I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..

View 2 Replies View Related

Worksheet Events: Use A Worksheet Event To Change The Background Of The Current Month Two Columns In The Range To Yellow Color

Jun 12, 2007

In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now itís 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.

View 3 Replies View Related

Worksheet Change Event :: In A Column For A Reconcile Worksheet

Jan 10, 2009

looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?

Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub

View 9 Replies View Related

Deleting Event Code With Code

Sep 2, 2006

Is is possible to use VBA to remove/delete a macro and also remove code like this on worksheets:

Private Sub Worksheet_Change
End Sub

Private Sub Worksheet_Activate()
End Sub

View 4 Replies View Related

VBA Code Triggered By An Event

Jan 25, 2008

I have 2 worksheets ('pathways', 'pathway events').

'pathways' has unique rows with a unique ID i.e. [Pathway ID] whilst 'pathway events' has the same initial column [Pathway ID] but with multiple values of the same [Pathway ID] value.

If an [Pathway ID] value is selected in 'pathways', I want it to trigger some code which will open a new worksheet and copy the multiple rows in 'pathway events' with the same [Pathway ID] value and paste them into the new worksheet.

Is this possible to do in Excel. I normally use Access and you can have triggered events.

View 9 Replies View Related

Userform: Run Code Under Another Event

Oct 19, 2006

In a Userform, is there a way to run code that's listed under another UserForm event subroutine?

Example:

I have a Listbox and several Labels. When I click on a selection in the listbox, it populates the labels with various data from a spreadsheet. This code is in a "list_AfterUpdate()" subroutine.

If I change a piece of data and click a CommandButton1, I would like the labels to automatically update.

The only way I can think to do that (at present) is to run the code listed in the "list_AfterUpdate()" subroutine.

Is there a way to run that code without duplicating it in the "CommandButton1_Click" subroutine?

View 6 Replies View Related

Event Code Firing More Than Once

Nov 2, 2006

i try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub

End If
Next
End With
End If
End Sub

View 2 Replies View Related

Worksheet Event

May 30, 2009

I would like to run a some code that is only activated if another worksheet in the same workbook is selected and I'm not sure how to achieve it.

View 9 Replies View Related

Unexpected SelectionChange Event Code

May 28, 2008

time-to-time an unexpected eventcode appears in my worksheet modules

View 10 Replies View Related

Adding Buttons And Event Code

Dec 17, 2009

How do I make a Command Button and put event handling code (in the VBE) to handle the click event?

View 2 Replies View Related

Capture Print Event To Run Some Code

Jul 21, 2014

Is there a way of capturing the print event to run some code?

I.e. The 'Print' button is clicked and then code executed in the sheet.

View 2 Replies View Related

Event Triggered Code Not Working ?

Mar 20, 2008

I have a manually calc'd workbook with the following code


Private Sub Worksheet_Change(ByVal Target As Range)

If Not Intersect(Target, Me.Range("VAL1CELL")) Is Nothing Then Me.Calculate
If Not Intersect(Target, Me.Range("VAL2CELL")) Is Nothing Then Me.Calculate
If Not Intersect(Target, Me.Range("CHOICE")) Is Nothing Then Me.Calculate
If Not Intersect(Target, Me.Range("$L$36")) Is Nothing Then Me.Calculate

If ActiveCell.Address = "VAL1CELL" Then Range("VAL2CELL") = Range("Y$41")

End Sub


Everything works as it should other then the part that is

If ActiveCell.Address = "VAL1CELL" Then Range("VAL2CELL") = Range("Y$41")

When the user selects VAL1CELL This is cell B2 and is a drop down, I want VAL2CELL which is C2 and also a drop down to show what is in Y41 (i.e the first name that appears in the drop down...not a thing happens ? is there a flaw to my code ?

View 9 Replies View Related

Clear Event Handler Code

Dec 23, 2009

I wonder if there is a way to clear event handler code in a userform programmatically?
Haven't quite managed it yet.

Something like:


dim x as integer
With ThisForm.CodeModule
x = .CountOfLines
For 1 to x
.line = ""
Next x

End With

View 9 Replies View Related

Validation Code For Change Event

Jul 20, 2006

change the below code from a worksheet_change to a worksheet_calculate method. and still do the same action. the reason I am changing methods is due to the fact that the validation will not trigger the worksheet_change event to fire. this is my attempt to find an alternative way to fire off the macro.....

View 9 Replies View Related

Multiple Targets In Event Code

Jul 28, 2006

I found this great macro here but I need it target more than column 1. does anyone knoe how to target column 1 and 3 at the same time?

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 1 Then
If IsEmpty(Target) Then
Target.Offset(0, 1).Value = Empty
Else
Target.Offset(0, 1).Value = Now()
End If

End If

End Sub

View 4 Replies View Related

Copy Event Code To Other Workbooks

Nov 1, 2006

Am trying to copy some code from the ThisWorkbook object into about 100 other Workbooks. I know how to Import and Export Modules, but when I export code from ThisWorkbook in saves it as a CLS file. Upon export a new class module is created. I simply want to create code that will automatically copy the code from one VBA project ThisWorkbook object to another VBA project ThisWorkbook.

I have the code to open all the files etc just need to figure out how to import the code from ThisWorkbook.

View 7 Replies View Related

Create Event Procedure Via Code

Nov 15, 2006

I'm trying to add a worksheet event via code. It works OK when I run it on its own but I get a run-time error 9 subscript out of range error when I try to run it from another procedure.

Please find attached my 2 bits of code. Any help greatly appreciated.

This is the bit that works OK on its own but not when called from my other procedure

Sub Code_To_Write_Code()

'This writes code to the new sheet

Dim StartLine As Long
Dim SheetToAddCodeTo
SheetToAddCodeTo = ActiveSheet.CodeName

With ActiveWorkbook.VBProject.VBComponents(SheetToAddCodeTo).CodeModule
StartLine = .CreateEventProc("Calculate", "Worksheet") + 1 ..............

View 9 Replies View Related

Change Event Code Not Firing

Sep 27, 2007

I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...

View 7 Replies View Related

Limit Event Code To Range

Sep 28, 2007

I've been using these things called ranges, but I'm not even really sure what they are or how to use them effectively. I want to be able to make the following macro only applicable to the range, of anything below F5,G5 and I5.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("$F:$I")) Is Nothing Then
Target.Font.Name = "Marlett"
If Target = vbNullString Then
Target = "a"
ElseIf Target = "a" Then
Target = "r"
Else
Target = vbNullString
End If
End If
End Sub

View 9 Replies View Related

Prevent Event Code Running

Oct 19, 2007

I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...

At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!

View 5 Replies View Related

Allow User To Disable Event Code

Dec 29, 2007

I have these codes in place in my excel file, there is nothing wrong with them at all. Here is the the problem : My superior runs the macros in place in the file almost daily, and when he is done he then closes it and all is well.
The macros does things to other files so they are changed in a way that the supervisors like them. I avoided putting macros in these individual files, because of the attempt to make it as simplistic as possible without them being able to affect overall file.
The problem happens when he (my superior) accidently makes a change in the primary sheet in the workbook with all the macros, it affects alot of my formulas and macros that are already in place. Within this workbook, it keeps a log of things from the other files results, so I have to have a record of it in the workbook, hence having a save event in place.

The Question: Is it possible to create a macro button, that will allow him to disable the codes below, so that he can close it and open again, so that it doesn't show any of the errors that happens by accident and try to close it again so there is no errors? Basically, I am asking what is the code for this, and where would I place it in.

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim mylogoff
Set mylogoff = Sheet1. Range("A65536").End(xlUp).Offset(0, 1)
mylogoff.FormulaR1C1 = "=NOW()"
mylogoff.Copy
mylogoff.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = Fals
mylogoff.Offset(0, 1).FormulaR1C1 = "=RC[-1]-RC[-2]"
Application.DisplayAlerts = False
Sheets("Start Here").Select
ThisWorkbook.Save
ThisWorkbook.Close
End Sub......................

View 9 Replies View Related

Worksheet Change Event?

Feb 7, 2014

I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.

[Code] .....

View 2 Replies View Related

Worksheet Event Not Responding

Jul 25, 2009

I have created a chart with four data ranges. I have a check box for the four ranges. If a check box is TRUE the data is shown in the chart. When I check one of the check boxes, I want the CreateChart macro to run, but this is not happening with the code below?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved