Add Letters To Range
Dec 15, 2006IS there a formula to add the letters PR to the end of each number in a column.
View 3 RepliesIS there a formula to add the letters PR to the end of each number in a column.
View 3 RepliesI have a sheet that has various data in the range of cells from B1 to Q80.
In these cells are various letters, numbers, etc. In some cells, the letter "L" appears not at all, sometimes once, sometimes multiple times.
I need a formula (or another method), that counts the number of times "L" appears in the range of B1 to Q80 (and not outside this range). Unfortunately, COUNTIF wont do the trick since sometimes in a single cell, "L" appears multiple times and would get counted only once.
I prefer a formula, because I have to do the same thing for the letters D, H, O, M, C, U, K.... I figure I could just copy/paste and modify slightly for each letter I'm trying to count the instances of. Unless of course there's an easier method.
Why does this work:
Code:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$10"
but not this?
Code:
ActiveSheet.PageSetup.PrintArea = Range(Cells(1, 1), Cells(10, 10))
You can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
View 2 Replies View RelatedI am looking for a formula that will return the lowest value from a five cell range using letters instead of numbers. If the 5 cell range is empty the cell will remain blank. Not all the 5 cells may be used - it could be anywhere from 1 to all cells.The weightings of the letters in terms of their numerical value are as follows:
F=0
P=1
M=2
D=3
Examples of desired results:
From A1 to A5 the following letters are inputted: P M M D P. Result in A6 = P as P is the lowest numerically in the above list. B1 to B3 = D D M. Result in B4 = M. C1 = F. Result in C2 = F. All cells blank from D1 to D5 = cell in D6 remains blank.
I have a key-word, and I need to search a 90,000 words in a range where i should find several words that have 2, 3 or 4 letters of the first letter of the key-word, then find several words that have 2, 3 or 4 letters of the second letter of the key-word,
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
First my goal is to sum a row and column. For example i want the sum of row 1 a to row 1 g. However, I'm using a loop for an automated macro. So i want to be able to say something like cells(1, count), so during the loop count goes from 1 to 7 representing the letters in the alphabet. But I'm not sure how to do so.
Secound, in my vba script to pull information from specific pages i say "sheet1.activate" how can i had the sheet switching during the process to speed up the calculation? and last but not least,
If Cells(1, locd) = "2008" Then
When i run my script, i get a runtime error 1004 application-defined or object defined error. The weird thing is, i can move what line it is on and then the macro will run ONCE and then it breaks again with the same error for that specific piece of code.
I am trying to code a macro that will search through a selected range of cells for key letters, for instance this cell may contain any combination of B, C, Te, Tc, RH, or LH. I would preferably like to search with capitalization being a factor but it is not a deal breaker. Below is a sample of what i have if the cell has a B, C it works for B but ignores the C i need it t o recognize both.
Code:
If InStr(1, ActiveCell.Text, "B") Then Range("O" + CStr(ActiveCell.Row)).Select
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.color = 65535
.TintAndShade = 0
.PatternTintAndShade = 0
[Code] ........
how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
Tallying entires from a PDF into excel. Such that
c=1000
d=15000
e=50000
f=100000
g=250000
h=500000
i=1000000
j=5000000
k=2500000
l=50000000
In a cell I would like to type =c+d+c for example and have it say 17,000 rather then me having to type in =1000+15000+1000.
I would like to create a column with letters from alphabet in a sequence. If I write A and in cell below I put B then highlight the two cells and drag down I get a repetition of A and B. How do I get the following alphabet letters ie. C,D, E etc.?
View 7 Replies View RelatedI created this data worksheet with many tabs and multiple users. On the main tab, something weird has happened and I have no clue how it happened or how to fix it....
View 5 Replies View RelatedI am basically looking for a method to fill in information through VBA in excel into a 2-D grid. Ideally I would like this to work but it does not.
View 14 Replies View RelatedI need to average the following row of letters. Is it possible?
A B D C C C C A B D A A A A A = AVERAGE OF THIS ROW (IE B)
I have a column of domains.
I need to add "http://" to the beginning of these domains. How can I do this?
EX. I have column A with about 27 cells of domains "website.com". I want to add the "http://" to the front of them.
Using =column() in cell A1 returns "1" as column A is column 1 with b being 2 etc.
How can I get it to return "A".
I have a validation drop down box type thing... when I select the drop down, the lower-most option is highlighted as a default. How do I make it so that the upper-most option is highlighted first?
View 9 Replies View RelatedI have a few columns of letters (ranging from A to Z) - onyl one letter per cell. I need to be able to deduct them such that they result in a numeric difference (ie D-B=2, D-A=3). Is there any way this can be done in VBA? (The actual columns are in a word table, so would be great if there was a VBA way to do this, not an excel function).
View 6 Replies View RelatedHow would i extract the first 3 letters of the first 2 words in a cell?
the cell may have 1 to many words in it.
I would like to exclude words like of and the...
i.e. the univeristy of washington should be uniwas
This formula will add up the letters D,N,H with one value
Like =SUM(COUNTIF(B4:AZ4,{"D","N","H"}))*12 will =36
How can I add bN =17 bmN =19 bD=24
=SUM(COUNTIF(B4:AZ4,{"bN","bmN","bD"})) to add up to 60
Im looking for a way to check what a workbook name starts with
What is the code if i want to do that. Is there is examples. What should i google after
I want to check if the first 4 letters in the string is equel to example "JVIT"
I'd like a function that converts a letter to a numerical value and returns a mean score for those values over a range. The values for each letter are:
A*100
A90
B70
C50
D40
E30
F20
G10
U0
So in the range G4:AB4 there could be 3 letters (G4:I4)
A* F E - their numerical equivalents in the table above = 100 + 20 + 30 = 150. The mean score for this range and expected output = 50 (150/3)
I have enclosed a sample spreadsheet. The range of grades that needs calculating is G4:AB4. Expected output should be in AC4.
I'd like to sum the following, ignoring F.O.Cs
7,500.00
2,250.00
F.O.C
=?
and also auto compute rows with F.O.Cs (each in different cells)
QTY---Unit Price---Total
5---------6---------30
2-------F.O.C-----F.O.C
I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
In column A I have the following numbers
13710
14782H
9827
14782
14206B
a formula that looks at this range of cells and returns only the cells that have a letter at the end. The letter range goes A to M