Range Using Cells Instead Of Letters?
Jun 5, 2014Why does this work:
Code:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$10"
but not this?
Code:
ActiveSheet.PageSetup.PrintArea = Range(Cells(1, 1), Cells(10, 10))
ADVERTISEMENT
VBA Find Function - Search Through Selected Range Of Cells For Key Letters
Jan 6, 2014I am trying to code a macro that will search through a selected range of cells for key letters, for instance this cell may contain any combination of B, C, Te, Tc, RH, or LH. I would preferably like to search with capitalization being a factor but it is not a deal breaker. Below is a sample of what i have if the cell has a B, C it works for B but ignores the C i need it t o recognize both.
Code:
If InStr(1, ActiveCell.Text, "B") Then Range("O" + CStr(ActiveCell.Row)).Select
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.color = 65535
.TintAndShade = 0
.PatternTintAndShade = 0
[Code] ........
Conditional Format Cells Containing Numbers And Letters - Ignore Cells With Number Only
Jul 11, 2014I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedAdd Letters To Range
Dec 15, 2006IS there a formula to add the letters PR to the end of each number in a column.
View 3 Replies View RelatedCount Letters In Range
Jul 20, 2009I have a sheet that has various data in the range of cells from B1 to Q80.
In these cells are various letters, numbers, etc. In some cells, the letter "L" appears not at all, sometimes once, sometimes multiple times.
I need a formula (or another method), that counts the number of times "L" appears in the range of B1 to Q80 (and not outside this range). Unfortunately, COUNTIF wont do the trick since sometimes in a single cell, "L" appears multiple times and would get counted only once.
I prefer a formula, because I have to do the same thing for the letters D, H, O, M, C, U, K.... I figure I could just copy/paste and modify slightly for each letter I'm trying to count the instances of. Unless of course there's an easier method.
Set Variable As Range Of Column Letters?
Jun 12, 2013You can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
Use Column Numbers Instead Of Letters In A Range
Feb 2, 2007I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
View 2 Replies View RelatedFind Lowest Value In A Range Of Letters
Apr 30, 2007I am looking for a formula that will return the lowest value from a five cell range using letters instead of numbers. If the 5 cell range is empty the cell will remain blank. Not all the 5 cells may be used - it could be anywhere from 1 to all cells.The weightings of the letters in terms of their numerical value are as follows:
F=0
P=1
M=2
D=3
Examples of desired results:
From A1 to A5 the following letters are inputted: P M M D P. Result in A6 = P as P is the lowest numerically in the above list. B1 to B3 = D D M. Result in B4 = M. C1 = F. Result in C2 = F. All cells blank from D1 to D5 = cell in D6 remains blank.
Search A Range Of Words, That Have 2 Or More Letters Of One Word
May 10, 2009I have a key-word, and I need to search a 90,000 words in a range where i should find several words that have 2, 3 or 4 letters of the first letter of the key-word, then find several words that have 2, 3 or 4 letters of the second letter of the key-word,
Sum Cells Containing Numbers And Letters
Jul 8, 2014I'm working on a function that will sum a row of cells containing letters and numbers. I am currently using :
=SUMPRODUCT((0&SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(B5:S5,"T",""),"TP",""),"TPE",""),"P",""))+0) as my base.
Right now the formula will work with T, TP, and P; however as soon as I type TPE I get #value.
Either way you get the point of what I am trying to do, however my cells can contain any one of the following combinations:
T,TP,TPE
P,PE,
E
Count Letters In Cells
Feb 18, 2010I have a spreadsheet filled with either "B" or "S" in cells. Its 500 rows long (starts from row 2) and its 839 columns wide, but the cells begin to be filled with B and S after column 11. I would like to count all B's and all S's in each column, and add them....it works for B;s as it counts them up and spits the result in row 503, just as it is supposed to. But the counter for S, does not work.
View 4 Replies View RelatedRemoving Two Letters From A String Of Letters And Numbers
Jul 29, 2014i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
Macro For Creating Letters To UPPER Letters
Dec 7, 2009I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
Remove Letters From A Column Containing Both Numbers And Letters
Jul 24, 2012I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
Macro To Convert Numbers To Alphabet Letters & Sum Range
Sep 23, 2008First my goal is to sum a row and column. For example i want the sum of row 1 a to row 1 g. However, I'm using a loop for an automated macro. So i want to be able to say something like cells(1, count), so during the loop count goes from 1 to 7 representing the letters in the alphabet. But I'm not sure how to do so.
Secound, in my vba script to pull information from specific pages i say "sheet1.activate" how can i had the sheet switching during the process to speed up the calculation? and last but not least,
If Cells(1, locd) = "2008" Then
When i run my script, i get a runtime error 1004 application-defined or object defined error. The weird thing is, i can move what line it is on and then the macro will run ONCE and then it breaks again with the same error for that specific piece of code.
How To Get Cells To Only Have Upper Case Letters
Jul 30, 2014Only have upper case letters.
I am trying to get certain cells to only have upper case letters.
each cell in the code will have a single letter typed in.
I would rather have it as an event code (change while it is typed), but I have not grasped the whole thing yet.
This code does not give me any errors, but it is not changing the lower case letters into upper case letters either.
[Code] ......
Formatting Cells For Both Numbers And Letters
May 15, 2013I need to format a column of numbers so that it will sort alphanumerically.
All the numbers have 4 digits, and some of them have an extra letter on the end eg A B C
How can I custom format the column so that I get the numbers in order and the letters in sequence with them?
Find All Cells In Col A That Start With A Given 2 Letters
Nov 7, 2002In col A I have various text codes in no particular order: i.e.cell A2 is PM-A01, cell A3 is BTC05, cell A4 is PM-B00, etc. The first two positions are always alphabetic. I want to sum all the numbers in column B whose adjacent column A text starts with "PM".
I tried =IF(match("PM*",A2:A100,0),b2,"") but just get "NA"
Can I Find Cells That Contain LETTERS During The Last 12 Months
Dec 19, 2007Log sheet Col a = Dates
Col d = Route ( Letters and numbers)
Col F = Times (1.2-2.3- examples)
Log sheet has 1,550 rows +
How I have been finding total for the Last 12 months is the formula below
=SUMIF(LOG!A:A,">="&TODAY()-365,LOG!F:F)
Now what I would like to try and do is the same BUT.
using COL D (on LOG sheet) to find out when I went to for example "JTF"
be advised that COL D is a route, so there are many results in each cell in col d..
So examples below
COL F On Log sheet
OERT-JPF-JMF-ASG1-JTF
OERT-JTF-JTF-ADC17-ADC17-ARAB3-ARAB3-DHAMC-JSK
OERT-JTF-JTF-ASG1-R655-JPF-JMF-LCL-JTF
OERT-JTF-JTF-R655-DHAMC-HAW-DHMAC
OERT-JTF-JTF-JTF-HI4-HI4-R655-ADC38-RS55-ES76-JPF-JMF-JPF-JMF
OERT-JTF-JTF-HI4-R655-ADC38-ES76-PMT-FLIGHT TOUR VIPS
Split Cells Based On Letters Vs. Numbers
Mar 3, 2009I have a column in one of my spreadsheets that I would like to split. There's currently not anything that can be used as a delimiter, nor can I use fixed width. the cells in question start with numbers and end with letters.
View 7 Replies View RelatedSplit Cells Based On Letters And Numbers?
May 20, 2013I have an excel sheet here with the data as
1.0 Develop Vision and Strategy
1.1 Define the business concept and long-term vision
1.1.1 Assess the external environment
1.1.1.1 Analyze and evaluate competition
1.1.1.2 Identify economic trends
1.1.1.3 Identify political and regulatory issues
1.1.1.4 Assess new technology innovations
1.1.1.5 Analyze demographics
.... etc
I need to split this into two columns column A should contain 1.0 and column B should contain Develop Vision and Strategy . Ex: 1.1.1.2 Identify economic trends in column A then column B - 1.1.1.2 column C - Identify economic trends.
Difficulty With IF Function For Cells Containing Both Numbers And Letters?
Feb 1, 2013I have a sheet with part numbers, costs and wish to add varying number to the cost in each row, based on a certain aspect of the part number:
A
B
C
[Code].....
In the example, 01/1X/2X/3X are the differentiating aspects of the part number. To rows in column A containing 01 (preceding the dash) I want to add nothing, 1X+.75,2X+1.5,3X+9.
I have researched the nested IF formula and can use it in a test as long as column A contains either numbers or letters. The problem I have is because there is both numbers and letters, the logical argument won't validate "if true". Here is my formula (omitting my attempts with parenthesis etc. around the letter in the logical argument):
=IF(IF(A1=1X,B1+.75,IF(A1=2X,B1+1.5,IF(A1=3X,B1+9,B1)))
Cells Revert Back To Letters Instead Of A Symbol
Sep 7, 2009The code brings up the message box the way I need it to
At the bottom of the code in the standard module is what I changed.
In the message box. If the GDT button is clicked the GDT chart opens. If the Symbol button is clicked the Symbol chart opens. This all works.
But will I select a symbol from the symbols chart it will appear in the cell that is double clicked. but then end up as a letter instead of a symbol.
But, the gdt chart works perfect.
I thought Cancel = True Would do the trick but does not. Any ideas what is missing??
This code below is in the sheet module
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As range, Cancel As Boolean)
ThisWorkbook.Unprotect
ActiveSheet.Unprotect
With Application
Cancel = True............
Move Cells Starting With Specific Letters
Jun 20, 2008I'm trying to write a macro that will find a value beginning "ber" and paste it across to a different column. I have had a go at it but I keep getting the offset flagged up.
It needs to move 15 columns across and 7 rows down if that is of any importance.
List All The Combinations Of A Group Of Cells Containing Letters, But Not Numbers
Feb 9, 2008I have 7 cells containing strings but not numbers on a row.
Now I want to list out all the combinations of drawing out 3 cells out of these 7 cells while the remaining cells that haven't been drawn out could also be listed out one column next to the drawn cells.
For example, I got 7 cells like this.
A B C D E F G (each letter in ONE cell)
And I want to list out all the combinations like this:
ABC DEFG
ABD CEFG
ABE CDFG
ABF CDEG
etc.
For more details, please refer to the attached sample (an .xls file being zipped).
Adding Numbers Separated From Letters In Multiple Cells
Jul 7, 2009I have column of cells containing entries such as V1, V3 and V7. I'm trying (and failing) to come up with a formula to separate the numbers from the letters and add them together: V1, V3 and V7 would together give 11.
I can use the MID worksheet function to separate my numbers from my letters on a row-by-row basis, but I can't work out how to do the whole thing in one fell swoop. =SUM(MID(A1:A10,2,2)) doesn't work, for example.
How To Seperate Small Letters And Big Letters
Mar 9, 2009how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Column Letters- VBA Command To Get The Letters
Nov 17, 2009Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
Formula To Average Range Of Cells And Copying It To Calculate Next Range Of Cells?
Mar 17, 2014I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Stop A Range Of Cells From Recalculating Once The Cells In That Range Have A Certain Value
Dec 5, 2008Is there a way I can stop a range of cells from recalculating once the cells in that range have a certain value?
I'm a complete newbie when it comes to any kind of programming and so...I'd need a little bit of handholding with this.