I have a few columns of letters (ranging from A to Z) - onyl one letter per cell. I need to be able to deduct them such that they result in a numeric difference (ie D-B=2, D-A=3). Is there any way this can be done in VBA? (The actual columns are in a word table, so would be great if there was a VBA way to do this, not an excel function).
View 6 RepliesI've got this problem: I need to separate around 40 alphanumerical entry in Column'A' to Columns'B','C','D','E'..
View 6 Replies View RelatedI have 2 columns i want to find out which items match in each column and put the matching value in column c. I have tried Vlookup and continue to get an N/A .. I tried countif and I get either an N/A or a value error. I have tried turning the cells into text but that is not working either..
column A has about 1700 rows and column B has about 4000
MOST CELLS ARE 6-7 VARIABLES.. satrting with either 01, 02, 03 with 4-5 letters following or have a 6 digit number or 6 letter value.
I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...
A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)
This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).
i have a list of 2000 fields which have the same format IE "AB10014"
I need to remove the "AB" from every field and leave the #.
Besides putting a space and running text to columns I'm not sure how.
I have words in cell range (i.e. A1:A1000) and I want them to became upper letters.
Excel forum to EXCEL FORUM
I have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
how can I seperate small and big letters from one collumn, example:
NAME
name
NAME
NAME
name
name
Is there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I would like to add the alpha numeric code "UK" at the beginning of the code listed in the excel file.
How to add this syntax with the listed code in excel file?
It looks for a numeric value then increments it of +1 based on the value found.
How would I modify this for it to look for an alphanumeric value first (EX.: 0A) then increment it alphabetically (Ex.: if 0A then the result would be 0B) and if the value searched is not alphanumeric it would then revert to the initial bit of code that searches for the numeric value?
Dim FndRw As Long, c As Range, LstRw As Long
Set c = Cells.Find(What:="No.", After:=Cells(1, 1), SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
If Not c Is Nothing Then
FndRw = c.Row
If Len(Cells(FndRw + 1, "B")) Then
[Code] ........
I create inventory cards and each needs a unique 4 character sequence number. Currently I have it set up with 4 cards per sheet. If I need to print more than 4 cards, the worksheet will print one sheet of 4, reset itself and increment the sequence number by 4 and continue this cycle until I've printed the number I need.
Currently I have it only using numbers. I start at 1000 and it increments, by 4, up to 9995. Once it reaches 9995 or higher, the increment resets to 1000 and starts over. The problem I am facing is I am now starting to get several cards that have the same "unique" sequence number. What I would like to do is change it from numerical sequencing to alphanumeric sequencing.
This is the code I currently use for the incrementing....
I would like to have a drop down list for cells in a row - say B1:I1.
Firstly, having the list (with only 2 selections) in these cells to place either an "A" or a "0" (zero) in a cell.
Next, if an "A" is added then a selection of a "B" or a "0".
If a "B" is added then a selection of a "C" or a "0". etc etc
If the "0" (zero) is selected and placed in the row then no more alpha but just the next number "2" available to select only then a "3" etc etc.
These would be added from left to right ie: A to H or 1 to 8.
I might be able to do this with a long formula but problem is there are 100's of rows. Maybe VBA would be more efficient?
(1) In an excel i am about to create 1000 rows of records. The first 100 i set the column to display" Job Role 001 - Job Role 100. The formula i applied from row 2 onwards is: ="Job Role " & TEXT(ROW()-1,"000")
(2) Then now i need to repeat this Job Role 001 - Job Role 100 for the next 100 rows. But if i copy these Job Role 001 - Job Role 100 to the next 100 rows it will result in: Job Role 101 - Job Role 200.
Any solution to make it repeat exactly Job Role 001 - Job Role 100 for next 100 rows onwards??
I'm trying to create a single column of stock bin codes for eventual conversion to barcodes. The bin codes run like this:
A1A
A1B
A1C - etc. to A1H, then the sequence starts again with:
A2A
A2B
A2C etc. up to A6H, when the 1st character changes to B and the sequence starts again
This needs to continue until the sequence reaches Z6H
How to do this without having to enter each code manually?
I want to create a 4 character alphanumeric sequence. The sequence is to be like this: a1a1-z10z10. If it's a number, increment 1 until you reach 10, then move to the next column, if it's a letter, increment a until z, then move to the next column. Excel's autofill feature doesn't seem to work well for me due to the letters involved, so if someone has a macro handy that would be great.
View 11 Replies View RelatedI have about 200 cells with 2 different format in text and numbers but they all have a number in between right after /vgh/.
Is there a formula I can use that will return only thee set of numbers removing the text before and after it.
Below are the 2 different examples.
Example 1 : h4ffkwd1-5o/vgh/2447044/eml-anet_wlcm-h-visit/?hs=false&tok=3GMdjcBsfbfBk1
Example 2 : h38ahlur-19/vgh/163311/?hs=false&tok=1CIRLlqwLSB5g1
I have these sort of text and just need the middle set of numbers.
I have alphanumeric characters and I have to rank them. Previously these characters were only digits (Using Rank function) and now some alphabets mixed with them. What is the function to rank Alphanumeric characters? They are like:
1A2240E01
210003004U
216000001U
499630001
463630001
400650001
I am trying to sort alpha numeric data like so -
PA1
PA2
PB1
PB2
PB10
When I sort, the alphabet part is sorted right, but the number part is is not what I want -
PB10 is right below PB1-
PB1
PB10
PB2....
I need a macro to delete only the alphabets which are entered along with numbers. Ex: 300ML. BY running a macro i need to delete only the "ML" and the number 300 should remain the same.
Range is For Rows: Entire rows
For columns: F TO P
The cell values betwwen these ranges contains alphanumeric such as 20KG,300ML,200M ...etc
Hence i need a macro to delete the alpha charecters for the particular range.
Ok, before any one shoots me down, i have looked around the forum and the internet for a answer, Im im half way there.
I have a column in my worksheet which contains alphanumeric data, I also have a Custom menu option to sort the worksheet but 3 columns.
No i know if i have a column contains the following ....
I'm looking to return in cell BG2, the highest alphanumeric value from 10 non consecutive cells (highlighted yellow). When I use the MAX function it works fine should I only have numbers in the 10 cells, but the values in the cells very from 1A to 5Z [all instances of these values are shown in a table on sheet2 with their 'scoring']
View 2 Replies View RelatedI have a rather difficult task to accomplish. What I need is to be able to extract an alphanumeric value from the string. It is a serial number of the equipment and it is always nine alphanumeric characters long. The problem is it can be anywhere in string. Example: “2156545 36 month lease NWL023568 Nancy Clay”. The serial number I need to extract is NWL023568.
View 7 Replies View RelatedI have values in cell like,
1,2,3 & 4
10,11
8,9,10,11,12
etc.
the formula to get min and max from this string
for the first value Min = 1 and max = 4,
for the 2nd value Min = 10, and max = 11
fo the 3rd one Min = 8 and max = 12
Objective: To create a list of numbers based a cell which are present in an alpha-numeric string
Issues: "-" shows up at times without the context of numbers (i.e. MS-DRG)
Issues: I am not interested in float numbers (i.e. 37.63-37.66)
'Example data in cells (row 1 = A1, row 2 =A2, row 3 = A3, row 4 = A4)
MS-DRGs 767-768, 774-775
Rev 115, 125, 135, 145, 155, 655-656
Rev 174
MS-DRG 001 with ICD-9 37.63-37.66, 37.52
'Desired Results (row 1 = B1, row 2 =B2, row 3 = B3, row 4 = B4)
767,767,768,774,775
115, 125, 135, 145, 155, 655, 656
174
001
I am trying to create a SUMIFS statement with an alphanumeric criterion. I have found formulas that delete specific alpha-strings from the alphanumeric criterion before summing, but I have multiple different alpha-strings for the different departments.
Right now I have:
Code:
=SUMIFS(E4:E100,G4:G100,ā€¯>1.67ā€¯,)
But I need to add in that the alphanumeric values in C4:C100 are >= 3000. There are always 3 letters at the beginning of the course codes and then a space before the 4-digit number.
I tried
Code:
=SUMIFS(E4:E100,G4:G100, ">1.67",C4:C100,">=*3000")
But that, alas, did not work and it does not appear RIGHT works with SUMIFS.
I have created a log file for work which records jobs processed. Additional code has just been added to retrieve job information data from a statistical process control program. This works fine however the spc program outputs the Ohmic value as ohms which I need to convert into alphanumeric format. For example: job value is 24K4, spc outputs as 24400 which I need to convert to 24K4. The Ohmic values range from mOhms to gOhms. Examples below.
0.003 = R003
0.025 = R025
0.150 = R15
1.0 = 1R0
15 = 15R
3600 = 3K6
1700000 = 1M7
220000000 = 220M
1000000000 = 1G0
Bearing in mind that the above are just examples of possible values, is it possible to convert numeric values to an alphanumeric format similar to those show above using VBA? You may ask why I need to convert. The log file allows manual input of job information where the value is entered in alphanumeric format. It also contains a search form which displays results allowing the user to see if a job has been processed. Obviously it is easier for the user if the job value is displayed as alphanumeric.
Is there a way of extracting all non alphanumeric characters from a single collumn?
After extraction, I just want strings with A to Z letters, 0 to 9 numbers, spaces and hiffens(-). All in lower case.
I am looking for formulae to identify the first 20 non-zero numbers from a string of alphanumerical and non alphanumeric characters
EG If column A any data such as:
123
0123
01(2)3
0.123
123abc
0123abc
01(2)3abc
0.123abc
a1b2c3
1a2b3c
Then the corresponding row for column B would return 123
Using help from my maths Prof and some IT bods, i have so-far come up with the array-formula:
=1*MID(A7,MATCH(FALSE,ISERROR(1/MID(A7,ROW(1:100),1)),0),20)
assuming that the total string is not more than 100 characters.
I am using the Concatenate() function to join strings from A1 and B1.
The result goes into C1.
How do I remove all the punctuation too?
In other words, I want to keep ONLY the upper and lower case alphanumeric characters....