You can have code: For i = 1 to 20, and you then use "i" in the code to represent a number between 1 and 20 as you all know.
I'm wondering can you do something like: For i = A to D, so then "i" in the code would be either A, B, C or D?
I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
View 2 Replies View RelatedI have a column of cells, some blank, some containing just numbers, some containing just letters, some containing numbers preceded by the the letter 'p'
E.g.
frt
34.2
36
p34.5
In the cells containing the number preceded by the 'p' - i would like to remove the 'p' leaving just the number, with all other cells remaining unchanged.
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedIs there a VBA command to get the letters, instead of the numbers, of the column of a selected cell?
I have to letter a list whihc means setting up a loop using character codes.
I may have to go into double letters so I am working on how I would set up the loop for if and when it gets past 90 and starts on double letters. so far the highest is the letter "U"
of course the easiest would be to pick up a column value as a letter
NT values do not get a number
A_____ _____NT###
B_____1_______C####
C_____2_______RMK###
D____ _______NT####
i am guessing the loop might involve some arithmetic test between the count and the character set 65-90. or maybe a mod thing.
I have a formula which assigns a points score to letters in a range and adds them up. In the example below F=0, P=6, M=12 & D=18. =IF( COUNTIF(AT5:BE5,"="""),"",SUM(COUNTIF(AT5:BE5,"=F")*0,COUNTIF(AT5:BE5,"=P")*6,COUNTIF(AT5:BE5,"=M")*12,COUNTIF(AT5:BE5,"=D")*18)). Thus if F, P, M & D were in cells A1:D1 the result would be 0+6+12+18=36.
My aim is to be able to customise the values of F, P, M & D, using a table and a cell value. See the table below, where the first number in each row represents a cell value which the user enters into BH1, the second, third, fourth and fifth numbers represents the values assigned to the letters F, P, M & D.
10 0 1 2 3
30 0 3 6 9
60 0 6 12 18
90 0 9 18 27
120 0 12 24 36
Some examples of expected output: user enters 10 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+1+2+3=6. user enters 90 into BH1 and then enters F, P, M & D in cells A1:D1 the result would be 0+9+18+27=54.
How do I use the value of the last column as a variable within a range like I have similarly used for the last row.
View 2 Replies View RelatedI am trying to set a range for a for next loop using the result of a find, the location of the find result will always be row 1 but may be in any column after Column D. I have been trying different ways to work out this issue but have failed in all my attempts. I would be very grateful to anyone who can tell me where I am going wrong (I am sure it will be very simple).
For Each shtRegisterSheet In ActiveWorkbook. Sheets
shtRegisterSheet.Activate
Set rngFindBalance = shtRegisterSheet.Range("c1:da1").Find(what:="Balance")
dteSaledate = Format(rngFindBalance.Offset(0, -1), "yy")
dteYeardate = Format( Date, "yy")
If dteSaledate < dteYeardate Then ......................
I have data (departments) going down column A Starting in Row 4.
Then I have data (months) going across Row two. Both of these will vary in length.
I need to copy a formula from cell C1 and paste it into cells where there is a value in column A and a value in Row 2.
I have a workbook that generates sheets for each year based on selected criteria. It starts at Column H and goes too AH and beyond. When my loop reaches Z it errors out. I think this is happening because the code is referencing the column as ASCII. Here is the
Sub Test()
Dim d As Date
Dim yrint, i, num_years, fields, field_start As Integer
Dim yrstr, crit1, crit2, left_column_range_fixed, right_column_range_fixed, left_column_range_var, right_column_range_var, left_column_range, right_column_range, cost_column, cost_column_var, cost_column_fixed As String
left_column_range_fixed = "H"
right_column_range_fixed = ":AH"
cost_column_fixed = "2"
crit1 = "=x"
crit2 = ">0"
d = Date
yrint = Sheets("Overall"). Range("H2")
field_start = 9 'changed from 9....................
how (if possible) to activate the link between the Excel spreadsheet and the VBA editor, so when I cut/paste row, columns and cells in my spreadsheet, my VBA code is automatically updated.
I have a rather large excel tool combined with a significant amount of VB code, and each time I insert/remove a line, I have to re-type the cell references,
I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below
[Code] .....
I've recorded this Macro to sort the cells in a column alphabetically if any cells have content.
I would like to use the Macro on the whole workbook however the AB column range varies between the worksheets.
How should I adapt this Macro to sort simply to the END of AB column??
' PWRII Macro
'
'
Cells.Select
[Code]....
The first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies View RelatedI know the column number (57) and want the formula to return the column name (BE) Auto Merged Post Until 24 Hrs Passes;not using vba that is! or if so , a custom function so macros dont have to be run.
View 3 Replies View RelatedIS there a formula to add the letters PR to the end of each number in a column.
View 3 Replies View RelatedI have a column of domains.
I need to add "http://" to the beginning of these domains. How can I do this?
EX. I have column A with about 27 cells of domains "website.com". I want to add the "http://" to the front of them.
Using =column() in cell A1 returns "1" as column A is column 1 with b being 2 etc.
How can I get it to return "A".
I have a sheet that has various data in the range of cells from B1 to Q80.
In these cells are various letters, numbers, etc. In some cells, the letter "L" appears not at all, sometimes once, sometimes multiple times.
I need a formula (or another method), that counts the number of times "L" appears in the range of B1 to Q80 (and not outside this range). Unfortunately, COUNTIF wont do the trick since sometimes in a single cell, "L" appears multiple times and would get counted only once.
I prefer a formula, because I have to do the same thing for the letters D, H, O, M, C, U, K.... I figure I could just copy/paste and modify slightly for each letter I'm trying to count the instances of. Unless of course there's an easier method.
Why does this work:
Code:
ActiveSheet.PageSetup.PrintArea = "$A$1:$J$10"
but not this?
Code:
ActiveSheet.PageSetup.PrintArea = Range(Cells(1, 1), Cells(10, 10))
I have a listbox on a userform and I'd like to easily populate it with all the column letters (< Excel 2007) A thru IV.
I assume my code will look something like this:
for iter = 1 to 256
userform1.listbox1.additem X(iter)
next iter
what my "X" should be?
I am looking for a formula that will return the lowest value from a five cell range using letters instead of numbers. If the 5 cell range is empty the cell will remain blank. Not all the 5 cells may be used - it could be anywhere from 1 to all cells.The weightings of the letters in terms of their numerical value are as follows:
F=0
P=1
M=2
D=3
Examples of desired results:
From A1 to A5 the following letters are inputted: P M M D P. Result in A6 = P as P is the lowest numerically in the above list. B1 to B3 = D D M. Result in B4 = M. C1 = F. Result in C2 = F. All cells blank from D1 to D5 = cell in D6 remains blank.
Say you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I have two worksheets: "1" and "2" Now i want to filter all symbols used in Column A sheet "1" and list them in Column A of sheet "2". The results should contain no duplicates. For example:..........
View 5 Replies View Relatedhow to create some code that can convert any column number to it's respective letter, from 1 = "A" to 16384 = "XFD". The code is posted below. Enjoy, or let me know how you would improve it.
Code:
Function colNumToChar(colNum) As String
Dim Num1, Num2, Num3 As Integer
Dim Let1, Let2, Let3 As String
[Code]....
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies View RelatedI have a excell spreadsheet that consolidate information from several other excel spreadsheets generated daily. To make this consolidation I have to open each daily excell file and copy some columns(always same ones) to my consolidate spreadsheet, but each daily information goes into a different column in the consolidated file.
So, I need a way to convert the columns names into numbers to be able to use loops on the VBA code where I can specify in each column the paste has to be done.
Anyone has the VBA code that can make this column name conversion into numbers?
I have several Excel workbooks that suddenly has converted to numbers for both columns and rows. Sheets that were saved and correct yesterday, upon opening today, are now numbered rather than number and letter. Any of my formulas now reference a RNumber and a number when citing location.
View 3 Replies View RelatedI have a key-word, and I need to search a 90,000 words in a range where i should find several words that have 2, 3 or 4 letters of the first letter of the key-word, then find several words that have 2, 3 or 4 letters of the second letter of the key-word,
to assign a variable to equal a Constant variable, then I need to find the last unused row on the worksheet, then paste that variable down the column (1-12200 or so rows). I also need to assign Strings for the first two Rows in the target column.
View 14 Replies View Related
