Add Rows Based On Values
Sep 9, 2009
If a numeric value exists in 'Column F' then do the following
1. Create 25 rows of same SKU in 'Column B' and add the leading consecutive number i.e. -1, -2, -3 etc. etc.
2. Reference each new row with it's corresponding key on 'Column F'. see reference chart for the corresponding number.
3. All other columns may be blank.
4. If N/A exists on 'Column F'. Do nothing. SKIP
5. Delete ALL ROWS that include numeric values with commas in "Column F'
Attached is original version which shows 2 rows. One with number values in 'Column F' and one with an N/A. Also there is a version that shows what happens after the macro would run. A workbook is attached with the reference table.
View 3 Replies
ADVERTISEMENT
Nov 3, 2006
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
View 2 Replies
View Related
Jun 20, 2008
I am copying a price list from a worksheet. I currently have a script that deletes unwanted rows (products) but these products' header rows' are left. I also want to delete these text based headers. One solution might be a script that reads a columns cell value in the row(s) below and if values are missing the header row should be deleted.
View 2 Replies
View Related
May 21, 2014
I have a sheet with a lot of different data. In column M in workbook "Maximo report" there are 5 different values. I want to copy the rows that contain CDC_HVAC and that have the value "INPRG" in column G to the sheet HVAC_INPRG. I want to do this for all 5 values. Once the rows are in their respective sheets I want to filter them based on a formula and then sort from oldest to newest. I dont want the file to be too big and I think that VBA is the way to do it. I am new to VBA
View 6 Replies
View Related
Nov 10, 2008
I have a 20,000 row text file that I import. It has blank rows, page headers and footers, and many rows at the bottom that I do not want. I have been cleaning up the data manually but this takes a great deal of time and I have a need to perform this clean up on a more frequent basis.
I have tried recording a macro to do some of the deleting but I am running into an issue that I do not know how to over come. When I filtered the data based on "Blanks" on a specific column and then try to delete them in mass, Excel errors out stating that my request was too complex.
View 11 Replies
View Related
Aug 7, 2012
I've tried several approaches on how to code this, but can't figure out how to work it. I have a large spreadsheet; which dynamically changes in both column and row counts. So, I have an array of values. If any cell has a negative value, that cell text needs to be changed to red AND that row needs to remain displayed. If ALL values in that row are >=0 then the row can be hidden.
The array is actually a pivot table named QTD
For Example: If cell D5 = 5 and F5 = -3 then Row 5 should remain displayed.
If Cell D6 = 5 and F6=0 then row 6 should be hidden because all values are > 0
Then I was thinking of using the case statement to hide the rows but can't figure the syntax. I'm open to any other means of performing the taks as long as the initial array dynamically to encompass all the data.
View 7 Replies
View Related
Nov 16, 2011
I have a vba to hide certain rows based on 4 values (either 15, 20, 25, 30) are the choices in the 'ComboBox' drop down list. I also have the rows grouped so i need to make sure to collapse those back each time. Here is the vba i'm using, but its not quite right for some reason.
PHP Code:
Private Sub ComboBox1_Change()
If Range("J8").Value = "15" Then
Range("A185:A244").EntireRow.Hidden = True
Range("A245:A304").EntireRow.Hidden = True
Range("A305:A364").EntireRow.Hidden = True
Range("A365").EntireRow.Hidden = False
[Code]...
View 1 Replies
View Related
Jan 5, 2012
I have a spreadsheet which will have several rows of data.
What I need is for some code to locate the duplicate values in the left most active column and then look over the rows that they are populating and delete and cells that are not present in each of the rows pertaining to the duplicate value in 1st Column and if possible remove all the blanks.
I have a sample, I will attach it and explain alittle better there.
View 9 Replies
View Related
Feb 1, 2009
Is there any way to hide a row if columns 6 and 7 both show either a "-" or a number lower than 0.5? Cells in both rows contain a VLOOKUP formula.
View 9 Replies
View Related
Oct 24, 2006
How can I delete rows in a worksheet using values in a certain column as criteria?
Example: I want to delete all rows that show a value of zero in column k. How is this done?
View 6 Replies
View Related
Sep 8, 2007
I need to hide rows on a worksheet based on entries from DATA VALIDATION dropdown lists on another. Due to the fact that all the entries are on a different page, and there is no active cells or entries made on the "second" worksheet, the WORKSHEET_CHANGE events will NOT work. Trust me, I have spent two days searching the net for a possible answer and trying every trick I could find. Not to seem redundant or a pain, but right from the git-go, FORGET the WORKSHEET_CHANGE event as an option. I need a way to fire the macros from a formula change in a linked cell, and it won't be an active cell, nor will there be any kind of entry made on that page at all. ALl the entries (choices) will be made on another sheet, but the result needs to be hiding the rows not required based on the choices I make. There are over 300 lines and when I am done there will be only approximately 35-40 left. Right now the people using this are actually making copies of the workbook, and then deleting the worksheets they don't need (I am hiding those with an array) and then deleting the lines they don't need on the worksheet remaining. (Stupid and slow I know, but I didn't develop this workbook, I'm just trying to bring it out of the stone age) Here is some sample code with what I want to do, except it is of a WORKSHEET_CHANGE nature and will not work.
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Range("INPUT!M6"), Target) Is Nothing Then
Rows("11:50").Hidden = True
If LCase(Range("INPUT!M6").Value) = "100" Then Rows("31:50").Hidden = True
If LCase(Range("INPUT!M6").Value) = "100" Then Rows("11:30").Hidden = False
If LCase(Range("INPUT!M6").Value) = "225" Then Rows("11:30").Hidden = True
If LCase(Range("INPUT!M6").Value) = "225" Then Rows("31:50").Hidden = False
If LCase(Range("INPUT!M6").Value) = "0" Then Rows("11:50").Hidden = False
End If
End Sub
View 9 Replies
View Related
Mar 1, 2008
I have a number of rows that I want to have duplicated X number of times (and altered) where X is found by looking at certain cells within each row.
There are four numbers in each row, and I want to split them up into multiple rows each with three zeros and one one.
I would like to convert data from this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 3 0 1 0
Mike 0 1 1 2
etc.
...to this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 0 0 1 0
Mike 0 1 0 0
Mike 0 0 1 0
Mike 0 0 0 1
Mike 0 0 0 1
etc.
You can see that the W, X, Y, and Z columns from the four new Mike rows sum to equal the values in the original Mike row (0, 1, 1, 2), but everything has been split so that each row just has a single one in it and three zeros.
Does anyone have an idea of how to do this? Thanks Auto Merged Post Until 24 Hrs Passes;I thought of another way of putting it that may be easier to understand.
Given an input row of "George, 4, 7, 3, 2", I would like the output to contain 4 rows of "George, 1, 0, 0, 0", 7 rows of "George, 0, 1, 0, 0", 3 rows of "George, 0, 0, 1, 0", and 2 rows of "George, 0, 0, 0, 1".
View 3 Replies
View Related
Nov 28, 2013
I have a sheet with 45,000 rows. Let's say each row has 4 columns: Create_timestamp, Update_timestamp, email_address, and o_flag
Many rows have duplicate email addresses. I would like to remove all the duplicate rows, EXCEPT for the row with the most recent Update_timestamp.
And actually, if I could just "hide" all those rows, that would be even better, but I'd be happy just figuring out how to delete all the "old" rows, so I just have a list of unique email addresses, with their create/update timestamps and o_flag column. Seems like this is such a basic use case for "Remove Duplicates,",.
View 1 Replies
View Related
Apr 18, 2014
I have a table based on transport numbers who sometimes have doubles. Example:
Number Postcode Value1 Value 2...
106200 8500 10
106200 8500 5
106200 8600 6
106201 5500 4
106202 4000 1
106202 4000 1
So it works as following:
A transportnumber can have multiple instances of itself, such as 106200. This transport number can also have multiple instances where the postcode is the same. These are the rows i want to combine
So shortly:
Transportnumber double/triple...+ Postcode double/triple...= combine these rows.
if only transport number is double, or only postcode, then dont combine. I want it to combine 2 columns of values, one will b the kgs, other one a price.
So example of end result for 106200 would be
106200 8500 value+value (these 2 rows matched so it combined the 2 values i want it to)
106200 8600 value ( this was unique so it stays unique)
View 4 Replies
View Related
May 27, 2014
I create a report that shows one set of numbers against another set of numbers based on a transactions list I pull monthly. The Report tab is really simple and is based on the sumifs. Sometime, new accounts are created that I don't know about. They show up in the transactions table but not on the Report tab. Is there a way to automatically add new accounts/rows on my summary sheet so that no account is missed? Is there also a way where columns A and B on the Report tab are unique values that are pulled from the transactions tab? Hence, if a new number and description are added, the list just picks it up. In my case however, there are tens or hundred of lines with the same accounts/descriptions.
View 3 Replies
View Related
Aug 13, 2014
I've been trying to put together some code to hide a range of rows on one page based on cell values on a different page. So basically Sheet1 cell A1 value is 10, A2 value is 20. When macro is run via button rows on Sheet2 from 10-20 would be hidden. The issue is the values in the cells on Sheet1 will vary. I thought something like the following would work but it doesn't.
[Code] ....
View 6 Replies
View Related
Feb 20, 2014
I regularly run a report that comes out in a slightly different format each time depending on whether or not there is data for specific criteria. for instance (sample attached): criteria a, b, and c are in rows, 1, 2, and 3 in columns. a, b, and c are expected to repeat themselves several times. if there is no data in one instance of b then you may see something like abcacabc.
I'd like to loop through each row in column a, check to make sure that it is the correct value (either a, b, or c) and if not, insert a blank row so I can then copy the data to my final project without having to worry about formatting.
the example above would then become abca cabc
View 3 Replies
View Related
Mar 7, 2014
Say I have two worksheets, "Sheet1" and "Sheet2". Let's also say A1 in Sheet1 could have one of four values: cat, dog, rabbit, mouse. Now, based on which value cell A1 on Sheet1 is, I need different rows hidden in Sheet 2. For argument sake let's say if cat is chosen rows 1-5 are hidden, if dog, 6-10 and so on.
View 5 Replies
View Related
Feb 20, 2009
Column B contains geographical Areas. Column C contains a list of business departments.
North Env
North Env
North Ops
North Sales
North Sales
North Sales
South Env
South Maint
South Ops
South Sales
South Sales
South Sales
Etc.
The values and number of these departments will vary. I want to insert lines to sum the totals at the bottom of each geographic area based on the number of different departments. So, for this example, for the North three lines would be inserted. For the South, 4 lines would be inserted.
View 4 Replies
View Related
Nov 26, 2012
I'm new to macros and VBA so I am wondering if it is possible for a macro to compare values in column B of sheet2 and column B of sheet3 and for the values that DON'T match i.e. unique values to column B of sheet2, copy row from sheet2 to sheet4? This will aid my processing time drastically if I can copy all the rows from sheet 2 to sheet 4 where the model number in column B of sheet 2 doesn't appear in column B of sheet 3!!
View 3 Replies
View Related
Apr 8, 2014
I am trying to hide rows based on values in a cell in that row. I have formulas in column xea that yields a 0 or 1 and I want to hide all rows with 0.
The code below works but I have to run the macro. I want it to happen automatically when the cell values change and I have not been able to figure it out.
Sub HideRows()
Application.ScreenUpdating = False
Application.Calculation = xlManual
For Each c In Range("xea1:xea350")
[Code] ........
View 9 Replies
View Related
Jul 7, 2009
I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
View 6 Replies
View Related
May 1, 2008
I need to CUT & PASTE records according a cell value. For example:
Columns A2 to AC1000 there are some values. In each rows of AD2:AD1000 the values repeats with the result something like "YES", "NO", "N.A.", "LESS CHANCE". So, I need to shift (to another sheet) only the entire rows with values of "NO" and "N.A."
View 6 Replies
View Related
Dec 30, 2013
I have created a spreadsheet from a master using vlookup. I want to be able to hide rows which contain a null value (NA) in column B (sample attached). Is there a formula I can use which won't interfere with the vlookup or do I need to hide the rows individually? I tried filtering but that only filtered the cell and not the whole row.
test sheet.xlsx
View 3 Replies
View Related
Mar 28, 2014
I have a data set which has 6 columns (and lots of rows). Every row is different but I want to aggregate them based on 4 fields and then find the average of the numerical column for the results. I basically want to Group based on 4 fields and find the average of the 5th field.
My initial approach was to introduce a column which is a combination of the 4 fields I want to group by, simply in the Excel file (=A2&B2&C2&D2) and then find duplicates of that. I have a solution for this in VBA but when importing new data sets in this method is very slow, so I want to be able to do the whole thing in VBA.
View 9 Replies
View Related
Jun 12, 2014
I need to create extra rows of duplicate data. The number of duplicate rows depends on the number of semi-colons in the 15th column (column O).
Sheet 1 is the original working file. Sheet 2 is the result of how the executed macro for the first 2 lines of data. The first line in sheet 1 has 7 semi-colons, so there should be 7 rows of duplicate data created in sheet 2. The second line in sheet 1 has 6 semi-colons, so 6 duplicate lines, etc.
View 3 Replies
View Related
Jan 27, 2014
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
View 2 Replies
View Related
Oct 28, 2009
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
View 5 Replies
View Related
Dec 7, 2009
I'm trying to copy Rows from a worksheet ("sheet1") in Workbook ("SourceData") to another workbook ("Final") and worksheet ("Regions") based on critieria selected in a listbox ("Listbox" located in a user form in "Final". The listbox selection is pasted in another worksheet, "Steps"). The trick is, the selection can be a single choice (Region2) or multiple choice (such as Region1, Region 3 and Region 7) and I'd want to copy any rows containing the selection criteria. I've got a bare bones start, but I can already see it's going to give me trouble. Here's what I've got:
View 9 Replies
View Related
May 9, 2008
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
View 9 Replies
View Related
