Macro That Merges Duplicate Rows Based On Unique Values
Jan 27, 2014
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
View 2 Replies
ADVERTISEMENT
Apr 18, 2014
I am looking for code to put in a macro that will go through a tab of data and delete the rows that have merged cells in them. The number of rows that there will be will never be a constant because the people using it will be pasted in information from another source, deleting the lines that have merged cells then run a macro with stuff that needs to be done to the info, but I would like to save them the step of delete the rows that have cells.I think it is Office 2013 I am using. I am not at that machine right now so I can't check.
View 4 Replies
View Related
Mar 5, 2014
I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).
What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.
Picture:
Column C Column D
111111 M
111111 M
111111 M
[Code]....
Currently calculates: M=9, F=2
Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.
Equation currently using to count only filtered values (in this case "males" and "females"):
="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))
View 9 Replies
View Related
Mar 1, 2008
I have a number of rows that I want to have duplicated X number of times (and altered) where X is found by looking at certain cells within each row.
There are four numbers in each row, and I want to split them up into multiple rows each with three zeros and one one.
I would like to convert data from this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 3 0 1 0
Mike 0 1 1 2
etc.
...to this:
Name W X Y Z
John 1 0 0 0
Doug 0 0 1 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 1 0 0 0
Karl 0 0 1 0
Mike 0 1 0 0
Mike 0 0 1 0
Mike 0 0 0 1
Mike 0 0 0 1
etc.
You can see that the W, X, Y, and Z columns from the four new Mike rows sum to equal the values in the original Mike row (0, 1, 1, 2), but everything has been split so that each row just has a single one in it and three zeros.
Does anyone have an idea of how to do this? Thanks Auto Merged Post Until 24 Hrs Passes;I thought of another way of putting it that may be easier to understand.
Given an input row of "George, 4, 7, 3, 2", I would like the output to contain 4 rows of "George, 1, 0, 0, 0", 7 rows of "George, 0, 1, 0, 0", 3 rows of "George, 0, 0, 1, 0", and 2 rows of "George, 0, 0, 0, 1".
View 3 Replies
View Related
Nov 28, 2013
I have a sheet with 45,000 rows. Let's say each row has 4 columns: Create_timestamp, Update_timestamp, email_address, and o_flag
Many rows have duplicate email addresses. I would like to remove all the duplicate rows, EXCEPT for the row with the most recent Update_timestamp.
And actually, if I could just "hide" all those rows, that would be even better, but I'd be happy just figuring out how to delete all the "old" rows, so I just have a list of unique email addresses, with their create/update timestamps and o_flag column. Seems like this is such a basic use case for "Remove Duplicates,",.
View 1 Replies
View Related
Mar 28, 2014
I have a data set which has 6 columns (and lots of rows). Every row is different but I want to aggregate them based on 4 fields and then find the average of the numerical column for the results. I basically want to Group based on 4 fields and find the average of the 5th field.
My initial approach was to introduce a column which is a combination of the 4 fields I want to group by, simply in the Excel file (=A2&B2&C2&D2) and then find duplicates of that. I have a solution for this in VBA but when importing new data sets in this method is very slow, so I want to be able to do the whole thing in VBA.
View 9 Replies
View Related
Oct 28, 2009
I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:
If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.
View 5 Replies
View Related
Jun 17, 2014
I'm new to VBA and macros, using Excel 2010, and am trying to figure out how to delete all duplicate rows in a sheet where 2 or less of their values in column A is "1". I'd like have a script that is flexible enough to change to 3 or less if need be. I also have a header row that needs to be offset in the process.
A---B-
0--123 <-delete
0--123 <-delete
0--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
or
A---B-
0--123 <-delete
0--123 <-delete
1--123 <-delete
1--123 <-delete based on this the value of column A
0--123 <-delete
0--123 <-delete
1--321
1--321
1--321
1--321
1--321
View 5 Replies
View Related
Jan 31, 2014
how to get this with formula:
Column A - - Column B
a - - - - - - - a
a - - - - - - - b
b - - - - - - - c
c
c
View 8 Replies
View Related
Jun 5, 2013
I have attached a before and after image of what I am looking to accomplish.
In the before image, you can see that there are 3 rows of data
- a header
- a repeating model number (in column F) with accompanying data (values in columns G - J are the items of interest)
In the after image, you can see that I took the 3 rows of data and turned it into simply two rows of data
- a header
- the repeating model number
What I did however in the after image, as can be seen, is I took certain data values that appeared on the repeating row (columns G - J), and included them as PRICE, COST, BEGIN, and END values in new columns on row 2.
Is there a way to accomplish this via some functions or maybe even a VBA script?
View 3 Replies
View Related
Jun 12, 2009
This is a logic based macro that needs to compare values in 1 column above a specific cell and take action until the column has no more data. Here's what I'm trying to do (and I've also attached a sample of desired results):
1) I want user to input starting cell. So I need to create a button for that.
2) This is where the logic begins and I'm having difficulty.
From cell defined in button, I move up one cell in that column and compare that value to the original cell.
If the value is greater than original cell then logic needs 2 outcomes:
a) move up 1 cell in column and if that value is less than original cell, then extract that value and copy that value one cell to the right or 1c.
b) move up 1 cell in column and if that value is greater than original cell, then move up again, until find lesser value than original cell. Once we find value less than original cell, extract value and copy value one cell to the right or 1c.
View 2 Replies
View Related
Aug 29, 2012
I am using the following code to copy a unique list, but it gives a duplicate in the first 2 rows(col Q). There is no headings in the columns.
Code:
Sub CopyUnique()
Dim lastrow As Long
lastrow = ActiveSheet.Cells(Rows.Count, "P").End(xlUp).row
ActiveSheet.Range("P11:P" & lastrow).AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=ActiveSheet.Range("Q11"), Unique:=True
End Sub
View 4 Replies
View Related
Jul 13, 2009
i would like to paste multiple duplicate values from unique values. Is there any way to do it in excel??
Ex:
Table 1:
3MG_HUMAN453
3MG_HUMAN44
3MG_HUMAN953
A1AT_HUMAN285
A1AT_HUMAN76
A1AT_HUMAN234
A1AT_HUMAN653
A1CF_HUMAN96
A1CF_HUMAN23
A1CF_HUMAN765
A4_HUMAN 944
A4_HUMAN 23
A4_HUMAN 755
Unique table
3MG_HUMAN100
A1AT_HUMAN78.89
A1CF_HUMAN90
A4_HUMAN 98
I wanted to add new column with these values for table 1 including duplicates. this is sample data and i wanted to replace thousands of this type.
View 7 Replies
View Related
Feb 23, 2012
I have a set of data I'm trying to clean up. I'd like some code that would look at column A, and if a duplicate is found in A, delete the duplicates entire row. Column A contains a unique identifier code.
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
View 9 Replies
View Related
Jan 5, 2004
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
View 9 Replies
View Related
Apr 5, 2007
Each sheet has the same basic formatting. A1 contains a name. B1, C1, D1 are column headers. B2:B is data. C2:C is data and always stops at the same row B2:B range does. The only differences between the sheets is that they might not stop at the same row. I want a macro that merges A1 vertically as shown in my spread sheet to the end of column B and C. I want a border around the merged data, as well as around the B data and the C data individually.
View 3 Replies
View Related
Feb 4, 2014
I am looking for some code that will use A,B,C as filters to find duplicate cells, and if duplicate found, there should be deleted the duplicated row (but not only the row from a,b,c column, but the whole 8 cells from that row - A,B,C,D,E,F,G,H).
As filter I would like to be used A,B,C columns.
EXAMPLE:
BEFORE
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar01 1
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar001 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
AFTER
A B C D E F G H
Kristijan Markovski 26,2,1992 1389 Prilep Prilep Mice Kozar1 1
Bojan Smileski 5,2,1992 1356 Prilep Prilep Borka Taleski 1
View 1 Replies
View Related
Mar 14, 2014
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
View 2 Replies
View Related
Dec 19, 2013
a macro to insert rows based on certain cell values in column A.
I have uto 300 rows of data. Below is an example of column A.
R1
1
2
3
4
5
6
7
[Code]...
If (above the R) is an 8, I need to insert 2 rows above that R and directly below the 8.
If (above the R) is a 9, I need to insert 1 row above that R below, directly below the 9.
(Below the R there is always a minimum of 8 digits with the 9 and 10 being random).
I have excel 2007
View 5 Replies
View Related
Jul 8, 2014
So I am trying to mark certain rows as duplicates if their values in Columns J, AD and ABS(BD) match. J and AD contain Number letter Identification combinations and BD contains a value. I currently have a formula as shows that will mark all of these values:
[Formula]
=IF(AND(COUNTIFS(J:J,J15,BD:BD,ABS(BD15),AD:AD,AD15)>1, (SUMIFS(BD:BD,J:J,J15,AD:AD,AD15,BD:BD,ABS(BD15)))<>ABS(BD15)),"Duplicate","")
[Formula]
The issue with this formula is that I do not want it to mark rows that look like this:
J - AD - BD
AA1 BB2 20
AA1 BB2 -20
AA1 BB2 20
I have a lot of rows that will appear like this. Their sum in BD equals the absolute value of the value in BD. I thought this would get picked up using the SUMIFS portion of my formula but it is not. I cannot find the problem.
View 2 Replies
View Related
May 1, 2006
I have a spreadsheet with three colums of data. The first column contains
records which have occasional phone number duplication- see blelow:
(555) 000-0000DataA1ValueA1
(555) 000-0000DataA2ValueA2
(555) 555-9770DataA3ValueA3
(555) 555-4464DataA4ValueA4
(555) 555-4464DataA5ValueA5
(555) 555-4720DataA6ValueA6
(555) 555-8823DataA7ValueA7
(555) 555-3834DataA8ValueA8
(555) 555-4125DataA9ValueA9
What I need to do is (somehwhat) automate the process of filtering or
deleting out all rows which have duplicate data in the first column, but not
second or third columns. I'm sure it's been done...I tried the Excel
out-of-the-box.
View 14 Replies
View Related
Jun 21, 2014
copying all Rows(including blanks) between 2 identical rows
for example
ID
Notes
4554
asdf
--
asf
[code]....
Copy from 2nd row to 7th row (I.E 4554 - 4554) 4554 is on sheet 2 with other rep ID's - Loop with other ID's would be great
View 8 Replies
View Related
Oct 13, 2006
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
View 2 Replies
View Related
Mar 2, 2014
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
View 3 Replies
View Related
Jan 8, 2013
how to highlight in one rows and 3 column if there is a duplicate.. i have attached here as an example....NameMatch.xlsx
View 4 Replies
View Related
Aug 6, 2012
I have a sheet whereby in column A i have company names and column B how much is invested in this company so:
A B
AAPL 10
GOOG 5
MSFT 15
APPL 5
IBM 20
GOOG 10
What i would like to do via macro is take all the duplicates sum them so that i see AAPL as 15 but only be left with one row. So we would be left with only 4 rows each with their summed weight.
View 9 Replies
View Related
Jun 26, 2009
In Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.
the row of numbers looks like this ....
View 9 Replies
View Related
Aug 8, 2007
I am using three columns - Col A contains serial number, col B contains name and Col C contains Codes.
The problem is in col C as sometimes the codes are copied from other files also. So I want that if there is any duplicate codes in column C, on running the macro it will delete the duplicate rows and keep original record ie the duplicte records added later has to be deleted and that the original record will be in place.
View 9 Replies
View Related
Jun 19, 2014
I am trying to determine if the value in cell Y2 also exists anywhere in cells AE2:QE2.
My initial stab at it is
[Code] .....
This results in a #VALUE! error (I am pretty sure that's because excel doesn't like the AE2:QE2 part).
I would do a formula-driven conditional format for this, but I have 2000+ rows that need to be acted on, so that's not feasible.
Is there any way to have excel check if the Y2 value exists in AE2...QE2, cell by cell?
View 6 Replies
View Related
