I'm trying to set up a worksheet so that when i enter a number in say cell J5 it will automatically create a new worksheet with the next number in order so if cell J5 was 1500 it would create a worksheet named 1501.
View 8 RepliesI have a problem to name correctly my new worksheet in order to obtain a sequence.
So my first worksheet' name is 3114
My macro is : [Code] ..........
And I don't know what I have to put after Name = ... to obtain the sequence, what means that the next worksheet is 3115, the next one 3116 etc.
I tried with Worksheet.Count but it puts the number of sheet starting from 1 ...
Add Worksheet Named As Cell. Number Sequence
how would I set it up so that it copies the page not just creating a blank page.
If I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc
View 3 Replies View RelatedI'm using MultiPage in a UserForm
I have multiple worksheets that can range from: HOLE 1 and go up to HOLE 30
I have other multiple worksheets that can range from: SAFETY 1 and go up to SAFETY 30
When I use the Code below it always goes to the 1st worksheet named either HOLE 1 or SAFETY 1
How can I have it so that when I click on the MultiPage Tab that it goes to the last sheet on the right for each?
Example: If I'm on SAFETY 5 it would go to that sheet, and not SAFETY 1 like it does now.
Here is my
Private Sub MultiPage1_Change()
Select Case MultiPage1.Value
Case 0 'page 1
Workbooks("Workbook.xls").Sheets _
("HOLE 1").Activate
Case 1 'page 2
Workbooks("Workbook.xls").Sheets _
("SAFETY 1").Activate
End Sub
Is it possible to have a tab named by referencing a cell within a worksheet?
View 9 Replies View RelatedI have code that adds the content of a userform directly onto the next available row starting at column B, using:
View 3 Replies View RelatedI have Excel 2003. I am trying to find the next number in a sequence of numbers. The number range is 1-59, and the sequence is 89 numbers that go like:
1
5
8
3
7
10
6
2
5
3
8
11
41,...(to the 89th number)
Need to find and then sum the sequence on a certain number. Using the number 1 in the example.
Example:
0
2
1
2
1
1
1
4
3
2
Answers: 1,3
I am trying to apply named cell from another worksheet to existing formula.
For example I have a formula in sheet2 which looks like =sheet1!A1+sheet1!B1. I then subsequently name sheet1!A1 = Jan and sheet1!B1 = Feb. Thinking that if I apply these names the formula in sheet2 would look like =Jan+Feb. However I get the message "Microsoft Office Excel cannot find any references to replace" when I try to apply the names using Excel menu "Insert - Name - Apply".
i have fixed headings in row 1. these could use up to 20 columns
in row 3 i could put data under any of the column heading
if i put data in any of the columns i would like a new worksheet created. the name of that worksheet to be the column heading not the data i have just entered. if no data is entered then no worksheet is created
About sequence number with 4 condition...
code number (as text)
desired result
date
condition
cost ($)
'1003
1
31/12/2000
1
5
[Code] ..........
if "code number", "date","condition" and "cost" the same line of rows so "desired result" = 1 like code "1003" or so code "1005" = 5, otherwise if there is a no match/same condition "desired result" start from = 2,3,4,etc.......
"A1" has a number containing "1000"
I want column "B2" to choose the next number in sequence,(1001) so long as "A2" contains these letters "EHT". if it does not contain "EHT" i dont want excel to insert the number "1001"
But if cell A3 contains, "EHT" I want the next number in sequence to be instered automatically... (1001, 1002, 1003")
I'm a little scared to post what with all the warnings and instructions but here goes.
Each month I have to create a new workbook for entering data daily, the tabs are named
"April 1" "April 2" "April 3" and so forth.
I am looking for a shortcut to adding each sheet manually and renaming each tab after adding in 30-31 sheets.
I have found code for adding and naming in numeric order, weekday, monthly, but need something to add both the name of the month and the day of the month.
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
87 1
87 2
87 3
88 1
88 2
88 3
88 4
89 1
89 2
90 1
91 2
92 1
92 2
92 3
92 4
92 5
92 6
I'm trying to set up an auto sequence number(col A) based on a date entry (col B) as in the example below. The sequence number should reset to 0001 each time the date in Col B changes.
Col A Col B
072306-0001 07/23/06
072306-0002 07/23/06
072306-0003 07/23/06
072406-0001 07/24/06
I have a list of dates in column A as shown below & I want to get a count formula in column B for the # of dates in sequence. When the date sequence breaks a new count should be done at the end of the next sequence. The formula should be 1 I can put in cell B1 and copy down so that there are blanks & a count is only done at the end of the date sequence like in cell B4 or B7 below.
Col A Col B
Date Count
1 12-Oct
2 13-Oct
3 14-Oct
4 15-Oct4
5 17-Oct
6 18-Oct
7 19-Oct3
[Code]....
I need to create a grouped sequence that changes every 10 rows.
So in Column A cell A2 the number would start at 01349 and every 10 cells it would decrease by 1 and go on down to 0
so it would look something like this:
01349
01349
01349
01349
01349
01349
01349
01349
01349
01349
01348
01348 ...
I have in column AU cell 39 to cell 500 random sequences of 1-10 rows ,
with numbers in them, (as an result of formulas)
I need to count the number of rows in each sequence that have numbers
of 35 or less , but only up to the first number of 35 or higher. eg:-
AU result
row 39 32 3
40 14
41 19
42 107
43 11
44 21
45 #value!
46 40
47 45
48 16
49 15
50 #value!
51 29 2
52 11
53 146
54 14
55 17
56 11
57 #value!
and so on down to 500 rows
I have worksheet with a column of client codes. These are made up of:
(a) a "base code", being a minimum four to five digit, i.e.
0000
0001
0002, etc
(b) plus a decimal point and a "sub code" (i.e.
.00
.01
.02
.03 through to .99)
The worksheet also contains the client name (i.e.
1031.00 John Smith
1031.01 Mary Smith
1032.00 Jack Brown
1033.00 My Company etc
As the supplier codes list has been manually done, there are numerous "gaps" in base code numbers as well as the subcodes.
I am looking to have a userform that a user can:
find the next unused base code and apply the 00 subcode (with client name).
I am trying to group the same values in columns together and i was thinking about having a number count. What's the function that might be able to display this (display whats in Column B in the example below)?
Values
5000 1
5000 1
6000 2
7000 3
7000 3
8000 4
8000 4
8000 4
9000 8
10000 9
10000 9
Is there any way to do this on Excel automatically ?
From this:
Code:
Column C
row1 A
row2
row3 A
row4
row5
row6
row7 A
row8
row9 A
To this :
Code:
Column C
row1 1
row2
row3 2
row4
row5
row6
row7 3
row8
row9 4
Note1: number of lines between each value may change.
I have the following data: (The Dept can occur multiple times in Col B.)
Col A
Col B
Row 1
[Code]....
What I want to do I want to insert a formula in each row of Col A that returns a number that indicates if the Dept in Col B is the first occurrence of the Dept, the second occurrence of the Dept, etc.
I am trying to create a number counter which runs up to a value which is determined by a COUNTIF Statement in the spreadsheet. I can get the number counter to run to the given value. However, due do formatting reasons I do not want the counter to start in cell A1 but A3 instead.
Essentially my code looks like this:
...
ActiveSheet.Cells(3, 1).Select
Dim i As Integer
For i = 1 To Range("A1")
Cells(i, 1) = i
Next i
...
I'm using a simple auto numbering command.
eg: cell A1: 1
cell A2: =(A1+1)
then shift, copy/paste cell A2 until A600,
This creates a sequential number column from 1-600. My problem lies when a new row is inserted, which is left blank. How can i maintain this auto function upon a new Row insertion?
I have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 Replies View Relatedi am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
I did a search for " import text" and found some promising leads, but not exactly what I was looking for. I have tried running macros and looking at the code but don't know how to pass the file names from the the D47:D147 range to VBA(see below). I saw elsewhere that Excel can be told to create a temporary batch file, and that the batch file with the command "copy text1.txt+text2.txt+text3.txt all.txt" for example could be used to merge the 3 text files into a file called all.txt. I don't however know how specify the path where copy starts, to tell the batch file to look in subdirectories or to pass the file into Excel. I've posted this question yesterday to Yahoo Answers http://tinyurl.com/omers and http://tinyurl.com/rfww9 without much luck.
Below is the macro I would like:I have text files whose names are found in the range D47:D147 although without the appended ".txt" extension. The sheets can only contain one name sometimes, but on average 8 to 10, so in the average case only cells D47:D56 would have entries.The text files are found in the say H:Textfiles directory or subdirectories.I would like Excel to find these files, concatenate them with a row between each file, and paste the results into cell K251.Finally, the text import wizard should be used with a space as a delimiter and the last 3 columns (it's sometimes only 2) of the concatenated file, not imported.
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I have a column of figures in a file sent to me recently which are dates but for some reason have been reversed eg 20140321. This is 21st march 2014. However I have tried formatting the number as a date (as we would normally see it in UK eg 21/03/14 or similar) and I cannot get Excel to recognise it as a date - I just get a long row of asterisks. How do I get a recognisable date sequence?
View 6 Replies View Related