I have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 RepliesI'm trying to set up an auto sequence number(col A) based on a date entry (col B) as in the example below. The sequence number should reset to 0001 each time the date in Col B changes.
Col A Col B
072306-0001 07/23/06
072306-0002 07/23/06
072306-0003 07/23/06
072406-0001 07/24/06
I am trying to create a number counter which runs up to a value which is determined by a COUNTIF Statement in the spreadsheet. I can get the number counter to run to the given value. However, due do formatting reasons I do not want the counter to start in cell A1 but A3 instead.
Essentially my code looks like this:
...
ActiveSheet.Cells(3, 1).Select
Dim i As Integer
For i = 1 To Range("A1")
Cells(i, 1) = i
Next i
...
I have code that adds the content of a userform directly onto the next available row starting at column B, using:
View 3 Replies View RelatedI have Excel 2003. I am trying to find the next number in a sequence of numbers. The number range is 1-59, and the sequence is 89 numbers that go like:
1
5
8
3
7
10
6
2
5
3
8
11
41,...(to the 89th number)
Need to find and then sum the sequence on a certain number. Using the number 1 in the example.
Example:
0
2
1
2
1
1
1
4
3
2
Answers: 1,3
I have a formula I am using to try create an auto Tacking Number system.
Formula:
[Code] .....
I want the number to appear as the data is logged into "C5"
The end product I am looking for will be "TS-July14-001", Where "M5" is the given month, "N2" is 2014 so I used the right formula to get 14
The last bit is where I am having problems, I would like the last number "001" to have a fill series effect.
Ultimately if this is possible i would then like the fill series to reset to 001 when the month in "M5" changes.
I have a problem to name correctly my new worksheet in order to obtain a sequence.
So my first worksheet' name is 3114
My macro is : [Code] ..........
And I don't know what I have to put after Name = ... to obtain the sequence, what means that the next worksheet is 3115, the next one 3116 etc.
I tried with Worksheet.Count but it puts the number of sheet starting from 1 ...
About sequence number with 4 condition...
code number (as text)
desired result
date
condition
cost ($)
'1003
1
31/12/2000
1
5
[Code] ..........
if "code number", "date","condition" and "cost" the same line of rows so "desired result" = 1 like code "1003" or so code "1005" = 5, otherwise if there is a no match/same condition "desired result" start from = 2,3,4,etc.......
"A1" has a number containing "1000"
I want column "B2" to choose the next number in sequence,(1001) so long as "A2" contains these letters "EHT". if it does not contain "EHT" i dont want excel to insert the number "1001"
But if cell A3 contains, "EHT" I want the next number in sequence to be instered automatically... (1001, 1002, 1003")
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
87 1
87 2
87 3
88 1
88 2
88 3
88 4
89 1
89 2
90 1
91 2
92 1
92 2
92 3
92 4
92 5
92 6
I have a list of dates in column A as shown below & I want to get a count formula in column B for the # of dates in sequence. When the date sequence breaks a new count should be done at the end of the next sequence. The formula should be 1 I can put in cell B1 and copy down so that there are blanks & a count is only done at the end of the date sequence like in cell B4 or B7 below.
Col A Col B
Date Count
1 12-Oct
2 13-Oct
3 14-Oct
4 15-Oct4
5 17-Oct
6 18-Oct
7 19-Oct3
[Code]....
If I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc
View 3 Replies View RelatedI need to create a grouped sequence that changes every 10 rows.
So in Column A cell A2 the number would start at 01349 and every 10 cells it would decrease by 1 and go on down to 0
so it would look something like this:
01349
01349
01349
01349
01349
01349
01349
01349
01349
01349
01348
01348 ...
I have in column AU cell 39 to cell 500 random sequences of 1-10 rows ,
with numbers in them, (as an result of formulas)
I need to count the number of rows in each sequence that have numbers
of 35 or less , but only up to the first number of 35 or higher. eg:-
AU result
row 39 32 3
40 14
41 19
42 107
43 11
44 21
45 #value!
46 40
47 45
48 16
49 15
50 #value!
51 29 2
52 11
53 146
54 14
55 17
56 11
57 #value!
and so on down to 500 rows
Add Worksheet Named As Cell. Number Sequence
how would I set it up so that it copies the page not just creating a blank page.
I have worksheet with a column of client codes. These are made up of:
(a) a "base code", being a minimum four to five digit, i.e.
0000
0001
0002, etc
(b) plus a decimal point and a "sub code" (i.e.
.00
.01
.02
.03 through to .99)
The worksheet also contains the client name (i.e.
1031.00 John Smith
1031.01 Mary Smith
1032.00 Jack Brown
1033.00 My Company etc
As the supplier codes list has been manually done, there are numerous "gaps" in base code numbers as well as the subcodes.
I am looking to have a userform that a user can:
find the next unused base code and apply the 00 subcode (with client name).
I am trying to group the same values in columns together and i was thinking about having a number count. What's the function that might be able to display this (display whats in Column B in the example below)?
Values
5000 1
5000 1
6000 2
7000 3
7000 3
8000 4
8000 4
8000 4
9000 8
10000 9
10000 9
Is there any way to do this on Excel automatically ?
From this:
Code:
Column C
row1 A
row2
row3 A
row4
row5
row6
row7 A
row8
row9 A
To this :
Code:
Column C
row1 1
row2
row3 2
row4
row5
row6
row7 3
row8
row9 4
Note1: number of lines between each value may change.
I have the following data: (The Dept can occur multiple times in Col B.)
Col A
Col B
Row 1
[Code]....
What I want to do I want to insert a formula in each row of Col A that returns a number that indicates if the Dept in Col B is the first occurrence of the Dept, the second occurrence of the Dept, etc.
I'm using a simple auto numbering command.
eg: cell A1: 1
cell A2: =(A1+1)
then shift, copy/paste cell A2 until A600,
This creates a sequential number column from 1-600. My problem lies when a new row is inserted, which is left blank. How can i maintain this auto function upon a new Row insertion?
I'm trying to set up a worksheet so that when i enter a number in say cell J5 it will automatically create a new worksheet with the next number in order so if cell J5 was 1500 it would create a worksheet named 1501.
View 8 Replies View RelatedI am kind of new to Excel programming and would like to know if there is a solution to my problem. What I need is to have a dropdown list (I know how to make this) then select an item from the drop down, then based on the name i select, Excel automatically fill up the rest of the cells.
For example, from the drop down list I select the company name then Excel automatically type the address, phone number, Fax number and the contact name of the company for me in corresponding cells. Is there a way to do this?
How would you select cell values from differing rows based on the name in an adjacent column. ie, if it says John, add that data to the source data, if not move on.
View 5 Replies View RelatedWhat would a macro look like that would find the value in the cell of the last row in the A column, then set that as the selection criteria so macro could copy all rows that match that to another workbook?
View 9 Replies View RelatedI have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View Relatedi am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
I want the numbers to increase based on the labels from a list, such as the first john chosen will get a 1 on the first cell on sheet 2, if john is chosen again the 2nd john will get a 2 on the next cell on sheet 2 and so on for the other names.
I tried to use IF(COUNTIF(D:D,D2)=1,LARGE(IF(D:D=D2,E:E)+1),1) but it didn't work out.
I have a sheet where I have a "Status" column in each row which could be "Waiting for Band", "Waiting for Organizer", or "Ready to Go!". These options are set as a data validation list. I have 2 cells later in each row where the response can only be "Yes" or "No". I want for the Status column to be set automatically based on the responses in the later two cells. So for example
where C3 and M3 are Yes, the status column in B3 should read "Ready to Go!"
where C3 is no but M3 is yes, the status column should read "Waiting for Organizer"
where C3 is no and M3 is no, the status column should read "Waiting for Band"
The above is actually an exhaustive list of all of the potential outcomes(!)
I have attached the file with this post.
What I like a macro to do is:
Whenever a 'D' ends in column "Step 5" the last value of 4 cells to the left to be put in sheet 2 in reverse order.