I have Excel 2003. I am trying to find the next number in a sequence of numbers. The number range is 1-59, and the sequence is 89 numbers that go like:
1
5
8
3
7
10
6
2
5
3
8
11
41,...(to the 89th number)
I have code that adds the content of a userform directly onto the next available row starting at column B, using:
View 3 Replies View RelatedNeed to find and then sum the sequence on a certain number. Using the number 1 in the example.
Example:
0
2
1
2
1
1
1
4
3
2
Answers: 1,3
I have a problem to name correctly my new worksheet in order to obtain a sequence.
So my first worksheet' name is 3114
My macro is : [Code] ..........
And I don't know what I have to put after Name = ... to obtain the sequence, what means that the next worksheet is 3115, the next one 3116 etc.
I tried with Worksheet.Count but it puts the number of sheet starting from 1 ...
About sequence number with 4 condition...
code number (as text)
desired result
date
condition
cost ($)
'1003
1
31/12/2000
1
5
[Code] ..........
if "code number", "date","condition" and "cost" the same line of rows so "desired result" = 1 like code "1003" or so code "1005" = 5, otherwise if there is a no match/same condition "desired result" start from = 2,3,4,etc.......
"A1" has a number containing "1000"
I want column "B2" to choose the next number in sequence,(1001) so long as "A2" contains these letters "EHT". if it does not contain "EHT" i dont want excel to insert the number "1001"
But if cell A3 contains, "EHT" I want the next number in sequence to be instered automatically... (1001, 1002, 1003")
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
87 1
87 2
87 3
88 1
88 2
88 3
88 4
89 1
89 2
90 1
91 2
92 1
92 2
92 3
92 4
92 5
92 6
I'm trying to set up an auto sequence number(col A) based on a date entry (col B) as in the example below. The sequence number should reset to 0001 each time the date in Col B changes.
Col A Col B
072306-0001 07/23/06
072306-0002 07/23/06
072306-0003 07/23/06
072406-0001 07/24/06
I have a list of dates in column A as shown below & I want to get a count formula in column B for the # of dates in sequence. When the date sequence breaks a new count should be done at the end of the next sequence. The formula should be 1 I can put in cell B1 and copy down so that there are blanks & a count is only done at the end of the date sequence like in cell B4 or B7 below.
Col A Col B
Date Count
1 12-Oct
2 13-Oct
3 14-Oct
4 15-Oct4
5 17-Oct
6 18-Oct
7 19-Oct3
[Code]....
If I want to create a column of numbers, say 1 2 3 4 5, I can simply add +1 to the previous cell and then use "fill down" to generate my number sequence. How would one generate a column of numbers that repeat once? e.g.: 1 1 2 2 3 3 4 4 5 5, etc
View 3 Replies View RelatedI need to create a grouped sequence that changes every 10 rows.
So in Column A cell A2 the number would start at 01349 and every 10 cells it would decrease by 1 and go on down to 0
so it would look something like this:
01349
01349
01349
01349
01349
01349
01349
01349
01349
01349
01348
01348 ...
I have in column AU cell 39 to cell 500 random sequences of 1-10 rows ,
with numbers in them, (as an result of formulas)
I need to count the number of rows in each sequence that have numbers
of 35 or less , but only up to the first number of 35 or higher. eg:-
AU result
row 39 32 3
40 14
41 19
42 107
43 11
44 21
45 #value!
46 40
47 45
48 16
49 15
50 #value!
51 29 2
52 11
53 146
54 14
55 17
56 11
57 #value!
and so on down to 500 rows
Add Worksheet Named As Cell. Number Sequence
how would I set it up so that it copies the page not just creating a blank page.
I have worksheet with a column of client codes. These are made up of:
(a) a "base code", being a minimum four to five digit, i.e.
0000
0001
0002, etc
(b) plus a decimal point and a "sub code" (i.e.
.00
.01
.02
.03 through to .99)
The worksheet also contains the client name (i.e.
1031.00 John Smith
1031.01 Mary Smith
1032.00 Jack Brown
1033.00 My Company etc
As the supplier codes list has been manually done, there are numerous "gaps" in base code numbers as well as the subcodes.
I am looking to have a userform that a user can:
find the next unused base code and apply the 00 subcode (with client name).
I am trying to group the same values in columns together and i was thinking about having a number count. What's the function that might be able to display this (display whats in Column B in the example below)?
Values
5000 1
5000 1
6000 2
7000 3
7000 3
8000 4
8000 4
8000 4
9000 8
10000 9
10000 9
Is there any way to do this on Excel automatically ?
From this:
Code:
Column C
row1 A
row2
row3 A
row4
row5
row6
row7 A
row8
row9 A
To this :
Code:
Column C
row1 1
row2
row3 2
row4
row5
row6
row7 3
row8
row9 4
Note1: number of lines between each value may change.
I have the following data: (The Dept can occur multiple times in Col B.)
Col A
Col B
Row 1
[Code]....
What I want to do I want to insert a formula in each row of Col A that returns a number that indicates if the Dept in Col B is the first occurrence of the Dept, the second occurrence of the Dept, etc.
I am trying to create a number counter which runs up to a value which is determined by a COUNTIF Statement in the spreadsheet. I can get the number counter to run to the given value. However, due do formatting reasons I do not want the counter to start in cell A1 but A3 instead.
Essentially my code looks like this:
...
ActiveSheet.Cells(3, 1).Select
Dim i As Integer
For i = 1 To Range("A1")
Cells(i, 1) = i
Next i
...
I'm using a simple auto numbering command.
eg: cell A1: 1
cell A2: =(A1+1)
then shift, copy/paste cell A2 until A600,
This creates a sequential number column from 1-600. My problem lies when a new row is inserted, which is left blank. How can i maintain this auto function upon a new Row insertion?
I'm trying to set up a worksheet so that when i enter a number in say cell J5 it will automatically create a new worksheet with the next number in order so if cell J5 was 1500 it would create a worksheet named 1501.
View 8 Replies View RelatedI have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 Replies View Relatedi am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
I have a column of figures in a file sent to me recently which are dates but for some reason have been reversed eg 20140321. This is 21st march 2014. However I have tried formatting the number as a date (as we would normally see it in UK eg 21/03/14 or similar) and I cannot get Excel to recognise it as a date - I just get a long row of asterisks. How do I get a recognisable date sequence?
View 6 Replies View Related there may even be an excel formula answer to it rather than a macro. Coloumn A has a series of numbers, I want column B to show those numbers in what would be there Descending Sequence.
Thus
Col A
100
97
14
87
32
108
21
So with this routine you would then see
COL ACOL B10029731478743251081216 The above I suspect is not too difficult, however if two (or more) numbers are the same I want the sequence to reflect that thus COL A COL B100297 314 797 332 5108 121 6 and no... the data - Col A - cannot be sorted, it must stay in that sequence.
If possible I would want this done automatically when any Col A value changes (any unused cells would be 0 by the way). Oh, there will in fact be 25 cells in column A for this.
I have in column " A" 500 rows with numbers in random sequences each
sequence has random number of rows , each sequence is seperated with a blank
cell (the result of a formula) some sequences have zerrows included.
I need to find the lowest number in each sequence and put that number in
column
" B" I also need to find the highest number and put that number in column "
C"
eg:- A B C
4 2 10
6
2
8
10
blank cell
7 7 50
9
11
13
50
18
21
30
15
blank cell
3 1 17
5
0
1
0
0
17
6
some sequences have two or more of the same numbers , in case of two ore
more of the same numbers only one is needed
I would like to create a column with letters from alphabet in a sequence. If I write A and in cell below I put B then highlight the two cells and drag down I get a repetition of A and B. How do I get the following alphabet letters ie. C,D, E etc.?
View 7 Replies View RelatedHow can I get the Longest sequence of 3's. E.g.
CA
1
2
3
5
3
3
5
4
My question is, a formula was provided to me that add's a comma and a space after a 15 digit sequence of numbers, that formula is:
=IF(MID(C378,LEN(C378)-1,1)="W",C378&" ,",C378)
And what that does is it would change data in a cell that looks like this
01-02-034-05-W2 TO 02-03-045-06-W2
To this:
01-02-034-05-W2 TO 02-03-045-06-W2 ,
The formula works great, thanks to the help of the posters!
However I just ran into an issue, what if I have a set of data in a cell that looks like this:
01-02-034-05-W2 TO 02-03-045-07-W2
02-02-034-05-W2 TO 02-03-045-07-W2
03-02-034-05-W2 TO 02-03-045-07-W2
And I need a space and a comma at the end of each sequence, so the above would change to this after the formula is applied:
01-02-034-05-W2 TO 02-03-045-07-W2 ,
02-02-034-05-W2 TO 02-03-045-07-W2 ,
03-02-034-05-W2 TO 02-03-045-07-W2 ,
Now the data in the cell is wrapped so it lists one set of numbers, then the next set, then the next set as seen above.
I'm trying to write some code to calculate the value of a Fibonacci Sequence, at a random point in the sequence.
For example if I have 5, 15, 30, 50, 75, 105... and my random value is 3 it would return 30.
Being new to VB the only way I've of thought of to do this is a massive if then statement.
I have a dynamic worksheet containing a variable number of rows that I would like to have automatically numbered when I run my VBA script. I used Dave Hawley's code as follows, with a modification to begin at cell A2, but it doesn't seem to work, as it only numbers cell A2 and not the rest.
VB:
With Range("A2")
.Value = 1
.AutoFill .Range("A2:A" & RowTotal), xlLinearTrend
.Range("A" & RowTotal + 1).Clear
End With
RowTotal is just a variable that holds the results of a simple last row finder. How to make this work?