I have recently discovered the beauty of add-ins, but I've got a small problem :
I saved my add-in workbook as an xla in the appropriate folder and I enabled the add-in in the workbooks, but when I open a new workbook, the sub I had made does not appear in the Macro's list (Alt+F8).
When I go in the VBA environment (Alt+F11), I see my sub in the workbook [Name].xla.xls...
Is there anyway I can make the sub appear in the Macro's list?
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
I have a form that is built based on the number a person enters. For Example - if the person enters the number 2 then 2 ComboBoxes are entered on the form.
The problem that I am having is that the list is not showing when the form is loaded. In the Project Screen all is OK until the final step when the form is Shown.
I have a list box looking at range IB5:IB100 I only have about 25 names listed. However the list box opens up about 3/4 of the way down with the list of names that are not there. The user then needs to scroll up to see the names.
How can I get the list box to show only the names in the list? or at least start at the top of the list (IB5)
I have a basic knowledge of spreadsheets, involving typical business needs (Average, Sum, And, Or, Logical Operators) but after roughly 35 minutes searching for a simple solution I'm stumped.
If I was to calculate the most popular (lets say fruit), I know it would be the MAX function, but what would the formula to show the Name of the most popular fruit and not just the amount of sales?
I have a spreadsheet and it shows a raw data dump of all sales transactions per product. This has been transferred via ODBC and I need some sort of query to filter out the data.
Is there any way I can write a query to only bring in the latest transaction based on the sale date per product?
I'm trying to place a pivot table in an existing sheet in order to have a list of names next to a P&L. I've got several criteria to filter the names, but when I apply the filters to the pivot table, not all the people show up. The weird thing is that the total at the bottom of the pivot table, which is a simple sum of time in a given month per person, calculates the correct number as if all the employees are there.
When I do the same table in a fresh sheet, in the same file, it shows correctly. It's only when I try to put the table in an existing sheet that it abbreviates the list.
I am trying to create a simple user interface type thing so that someone is able to select from drop down lists someones information, such as whether they are male or female, aged between 19-35 or 35-67, whether they are studying in a business area, legal or construction etc (there are 6 variables in total), This will then give the probability of success of the person passing this course based on probabilities which I have already worked out. I have worked out how to do the first stage of creating a drop down list showing alternative choices with Sex, Age etc in the data validation options, however:
There are 517 possible combinations, as in Male aged 19 to 35 studying Business (with other variables) or Male aged 19 to 35 studying Law (+ other variables) etc etc etc each with their own probability of success. Due to the long nature of writing out Male1935BusinessNorthWestWhiteBritishCollegeBrown I have rewritten it so it appears in the excel file as M1935BNWWBCB, which obviously wouldn't make any sense to someone if they had to select M 1935 B NW WB CB from drop down lists.
Along side the M1935BNWWBCB there is the probability of success specific to that type of person. So for example I could would have: M 60% M1935 64% M1935B 35%....
Why when I open some files that have macros and I enable macros on initial opening and then go to tools-macro-macros it's not showing anything there, but when I press Alt F11 then I can see macros?
Is there any way to change this that I can see all macros from tools-macro-macros?
Writing a macro that when runned will show only two specific sheets in a work book. If i run macro 1 the sheet "xxx" and "start" should be the only visible sheets in the work book. If i run macro 2 after having runned macro 1 sheet "yyy" and "start" should be the only sheets appearing.
I've forgotten how to prevent the macros from showing in the macro dialogue box.
I'm sure it's got to be something with the VBA editor, but I can't figure it out.
I've got some files where the macro list is hidden and I'd like to do the same again, but for the life of me....I'm stumped. I'm sure it's something very simple.
I've protected the Worksheet & Workbook.
I've done some searching...."macro hide", "hide dialogue" etc. but can't seem to find what I'm looking for.
It's been a while since I had to amend code, as everythings been running very smoothly.
I have a dynamic list of names from B2:B500. I want to write a macro that finds all the unique entries from that list and pastes it to AD3:AD501 everytime the macro is run. What would be the code for this procedure.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I have a tab within a workbook where i want the user to copy a different spreadsheet into and then press a macro button to run some code, however after this button has been pressed i want this one tab to show any changes that have been made to it, i.e make the cell red or something just so i can keep track of manual adjustemnts.
I am currently having an issue with the formula below showing a zero when there is no data, now i am referencing from this cell to another sheet but even with the IF(ISBLANK inside the formula on the other page it still shows a zero which is messing up what i am trying to do on another page.
I have a cell that contains the =Day1!G4. It reveals what is on another worksheet, but I want to be able to have the next cell be: =Day2!G4. Is there any way that I can code this without having to physically type in every cell? I tried, =Day1+1!G4 but it didn't like that.
The formula that I came up with perfectly works well with clear values. Everytime there's a #NUM!, #VALUE! in my array, the result I want wont show up.
I am creating a spreadsheet system for storing school grades, and I have a sheet on my system which shows graphs of the students data, and on this sheet there are rather a lot of graphs, and its sort of a visual overload to see so many graphs on one sheet. Im just wondering if there is any thing which I could insert which would give the person using the system a choice of which class's graph they want to show.
I can't get the zero's to show up in the part number formula in the wooksheet. Also how do you get the zero's to stay when you type numbers such as (03,04,ect.) the zero always disapears. I need it to stay as a number and not text.
I placed an add-in (.xla file) with a " function" and a "sub" into C:Microsoft Office XPOffice10Library. When I go to Tools-->Add-Ins the Add-In doesn't show up. When I browse the file it says it already exists and still doesn't show up. The strange thing is that the "function" does work, but the sub (which is a sub worksheet_change) doesn't run. I also tried doing the steps as they are laid out in http://www.ozgrid.com/VBA/excel-add-in-create.htm and ended up with the same problem. The function works when I open up a brand new Excel application and use Book1, so I know the function isn't embedded in the sheet.
I have a vlookup that I have almost working but I'm a little stumped my the last bit. the formula I have is this =VLOOKUP(J4,AW:AY, 3, 0) and the only issue I have is that if there is nothing in J4, then I want nothing to appear in my vlookup cell, but it is currently showing #N/A.
Why the value is showing up as 0. I know it should be 4 but it is returning the value 0 when I run my code clean through. When I step through the code using F8 it shows up as 4 as long as I am on the tab where the worksheet is. Why my code is returning a 0.
VB: StartRow = 5 Dim CountX As Integer Dim LastRowX As Range CountX = 0
I am using dglinfo with if statements, and I know that the spreadsheet is updated but the only way I can show the value in particular cell is by hitting the fx. Is their a way to show all the values at once instead of going cell by cell?
I have a spreadsheet gathering information on vehicles. One of the pieces of information is a 'Date Off Strength'. For the vehicles still on strength I have the symbol '#N/A' showing,, this is linked to a sheet using a VLOOKUP formula, is there a way to stop this symbol showing
I have to compile spreadsheets as tables of various values. One column in particular is a column of ID numbers and the worksheet is very very long. I need a method for checking this one column for duplicate ID numbers.