I've a macro (I recorded) that executes a query (Oracle) and returns rows that exceeds the max (65539). How do I go about adding another sheet therefore allowing the query to continue?
I know how to do it via opening a text file and importing, but do not know how to do it with the use of a query.
I run a web query to populate a table in my spreadsheet. The data is dynamic - and on some days, I will get a couple of extra rows in the table (its weather data, so e.g. when its raining, they will forecast an extra row of how many mm, etc...)
To give a simple example, right now I use Hlookup to locate the value of F3 (the date) in my dynamic range of B26:G26 and step down 3 rows, where my needed temperature values are for that corresponding day. This works great like this already: =HLOOKUP(F3,B26:G29,3,FALSE)
The big issue is...what happens if my target values are not always 3 rows down? If the query refreshes with any extra rows, this reference is shifted. (Well, my starting "Anchor" is shifted)
I have recently installed excel 2007 how do you edit and ODBC query from the spreadsheet. In 2003 you right clicked on a cell that opened a dropdown where you selected edit query.
I have an Excel spreadsheet with a query to an Access table. The query pulls data from 2 columns in a table and pastes it to the spreadsheet. I am trying to update the VBA a little on one sheet and now I get the attached error whenever the code tries to run in Excel. Here is the code with the offending portion separated at the top.
I have a combobox which is used to select data (stock symbol) from a list. Following selection of the stock symbol, a VBA routine is invoked from a radio button which accesses the internet to get data for the selected stock. Currently, this is a two step operation. I tried to cut out the need to click on the download button by calling the GetData sub inside the combobox sub as shown in the code below.
Application.ScreenUpdating = False Dim s As Variant Dim resp As Long resp = MsgBox(prompt:="You are about to clear ALL current year payroll information. Are you sure you want to continue?", Buttons:=vbYesNo) If resp = vbNo Then
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this WEB 1 http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
I just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
I wanted to know If there a way to hide the process of executing macrob (vba)? I have a long macro that runs on a file and I want to hide the process. I know there is an option to it, I just don't know it.
I have a workbook with several worksheets. The numbers entered by the user in the cells C7:C9 of sheet "A" will be used to calculate some values in sheet "A" as well as in sheet "B".
Calculations on both sheets involve macros: macro "scale" on sheet "A" and macro "sort" on sheet "B".
I used this code to execute macro "scale" on sheet "A" triggered by the Worksheet_Change function:
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range("C7:C9")) Is Nothing Then Exit Sub Else scale End If End Sub
now, I want to execute macro "sort" on sheet "B" practically at the same time (with the same worksheet_change condition for sheet "A")
All off my attempts resulted in running "sort" in sheet "A" which is not what I want. I couldn't get it to execute the macro in the other worksheet. Already tried "With Worksheet("B") and "Dim ws As Worksheet, Set ws = Worksheets("B") - no luck...
The error trap does work when there is an error, but it also runs at the end of the code when there isn't an error... I'm not sure what I've done wrong. When I test with data that is correct, it still runs through the code when it gets to the bottom. Have I put the error trap in the wrong place?
I have put in bold the section of the code with the error trap.
Option Explicit
Const TargetDB = "Group Life Pricing Tables v0.1.accdb"
Sub HMUK_Val() Application.ScreenUpdating = False
'define variables to be used in the process Dim cn As ADODB.Connection Dim rs As ADODB.Recordset Dim fld As ADODB.Field Dim sSQL As String Dim SchemeInfo As Integer Dim CurrentAge As Integer Dim CurrentRow As Integer Dim CurrentSex As String Dim Message 'check that Scheme data has already been entered For SchemeInfo = 1 To 13 If Sheets("Working Info").Cells(SchemeInfo, 2).Value = "" Then Message = MsgBox("Please ensure all Scheme information has been entered before processing member info", vbOKOnly, "Warning") Exit Sub End If Next SchemeInfo
I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.
When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.
The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!
I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.
My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.
I am trying to see if it is possible to create an intentional delay when executing a macro. Basically I would like to pause the macro for 5 seconds and then continue with the rest of the code.
I have a workbook which autosaves and closes if no data is input for 10 minutes. It resides on a drive accessable by all our team and is set so that only one person can have read/ wrote access at a time. It tests for read only, shuts down if it is and saves and shuts down if not.
I have noticed that it doesn't work if the workbook is waiting for input.
I.e. someone starts to enter text, or something, in a cell, then goes off to make a coffee or whatever leaving the entry cursor sitting there blinking. It will not shut down after the ten minutes with no input.
I have finaly completed my project to include all the bells and whistle needed to make an ok task a bit more exciting. However, i am having a problem when the code is executing. It seems to "break" at random points in the process. I am not able to duplicate this error at my home (nor do i want to) and I can not quite figure out what is causing this as it only happens at my work computer. I have tried my coworkers computer and the code executes flawlessly like at my home.
Strangely enough, when the code breaks I am able to hit 'continue' and it continues on its way until the next hiccup. Please assist as this fluke is causing my brain to spiral.
if I can send text to a macro and have VBA treat the text as a line of code?
Suppose in a worksheet in cell A1 there is the following "text" msgbox "hi there"
can you get vba to do the following:
Sub runtext() Mytext = sheets(1).range("a1").text XXXXXX Mytext End Sub
where "XXXXXX" is a method or command that will cuase vba to evaluate the text string and run it as a line of code (returning a message box saying "hi there")
I don't want to send variables/objects to an existing method in VBA - I want to send the method to VBA....
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run. I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
I have a file I created which works fine for me, on my machine at least but there are two issues I'm trying to sort out.
The first issue is I need to share the file with others who may not have the same access rights. I have something loading in the Workbook_Open event which I want to bypass for users who do not have access to a specific folder. So I was trying to check their access using Dir(path) = "" at the top level folder to see if any files are present (which there are). My assumption was that if it finds files it's safe to assume they have permission and it's ok to continue, otherwise they don't in which case I want abort the rest of the code. This seems to work fine for me but I tried testing with someone I know does not have access and it gave her a compile error.
Part of the code in macro utilizes FileSystemObject which seems to be the line where the code bombs on my coworkers machine. The FSO seems related to appears related to the Microsoft Scripting Runtime reference, but it's not enabled on my machine or any of the others. I vaguely remember having to do something on my machine awhile back for the life of me don't remember what it was.
The second issue is an MS Forms error: "Could not load some objects because they are not available on this machine." appears when opening the file on three of the machines I tested but it does not appear on my machine. I've tried looking at the references and could not find any differences between the machines. I pored through various postings online and it appears it might be worth re-registering the DLL/OCX files but we need admin rights to do that so I will need to open a request with our support team.
I have a Userform that has 4 Textboxes (named TextBox1, TextBox2, TextBox3 and Textbox4) and 7 Option Buttons (named OptionButton1, OptionButton2, OptionButton3, OptionButton4, OptionButton5, OptionButton6 and OptionButton7). I need to validate that the following criteria is met:
TextBox1.Value Does not = "" TextBox2.Value Does not = "" TextBox3.Value Does not = "" TextBox4.Value Does not = ""
One Option Button is selected. (It can be any one of them 1-7, Just one needs to be selected).
Is there an easy way to check this data before executing a sub procedure to move the data?? Here is my try at it:
Code: Sub CheckData()
'Is this the correct way to check data ? If TextBox1.Value = "" Then TextBox1.SetFocus MsgBox "Please enter a Batch Date", vbCritical
I am using Office 2007 and perhaps that is my issue. When executing the macro, I get double the page references than there actually are. My workbook has approx. 330 pages and when the macro finishes I have over 700. Certain tabs have a different page setup, and I assume that the macor only takes the regular pagination into consideration. I have landscape as well as portrait setup.
I also receive the errors upon completion in the bolded areas:
Sub CreateTableOfContents() ' Copyright 1999 MrExcel.com ' Determine if there is already a Table of Contents TOCFound = False For Each s In Worksheets If s.Name = "Table of Contents" Then TOCFound = True Exit For End If
When running a script within Excel, is there a way to cause the script to initialize or open an application other than Excel? For instance: If I desired to have the script open 'C:program.exe' is there script available for this?
I have written a vba code which does some calculation on the data on sheet 1 and then puts this data on sheet3 and after the calculation is done it puts the result on a few comboboxes on sheet2. Now the issue is while this whole calculation is performed by excel, I can see the movement in between the sheets. I want to avoid seeing this movement ?
Is it because of multiple Sheet.Select statements inside the vba code ?