Executing A SHIFT+xlUP Syntax
Nov 14, 2009What is the syntax for executing a 'SHIFT+xlUP' function in an Excel macro?
View 4 Replies
ADVERTISEMENT
Correct Syntax For Executing Vba
Apr 26, 2007What I want to do is make a simple text link inside of a cell so when it's clicked on it executes the CommandButton(x) VBA script.
I'm guessing =HYPERLINK is going to be the best method.
Like so:
=HYPERLINK("Forms.CommandButton1","E-Mail")
If Else Syntax: Change Some Outputs Of The Macro Without Changing The Syntax
Jul 19, 2006I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
Lookup Wage Calculations (calculate Pay Per Shift Dependant On The Type Of Shift)
Dec 1, 2009I have the basics set up, but need to work out how to make it calculate my pay per shift dependant on the type of shift i have worked.
I have attached a screen shot of the current page,
In it i have currently used validation drop boxes for the location and worked columns with tables just to one side of the sheet.
The shift pay is the column i am having trouble with.
I would like it to change dependant on what is selected in the 'worked' column.
For most things it should just display basic plus holiday, however if supervisor is selcted in the work column, it should display basic plus holiday plus supervisor.
Calculate Pay For Shift Work With Different Rates Based On Shift Hours
Apr 11, 2008a person works for certain hours and get paid according to the hours worked either by day or by night or a mix of both. Day payment is $8 when worked between 08:00 and 19:59 , night payment is $12 when worked between 20:00 and 07:59. The excel cell are formatted as datetime with yyyy-mm-dd hh:mm , the function works fine in getting the time information and checking whether the whole work is all day or all night , yet the if-then-else statements for calculation seems to be wrong!!
examples:
start = 2008-01-01 09:15 , end = 2008-01-01 11:40 , all day as it is between 08:00 and 20:00 and cost = 8/hr = 19.333
start = 2008-01-03 21:05 , end = 2008-01-04 02:05 , all night as it is between 20:00 and 08:00 and cost = 12/hr = 60.000
start = 2008-02-02 19:00 , end = 2008-02-02 20:05 , cost = 9.000 as 1 hour day = 8.000 plus 5minutes night = 1.000
Function prod(st As Date, en As Date) As Double
Dim shour As Integer
Dim smin As Integer
Dim ehour As Integer
Dim emin As Integer
Dim stod As String
Dim etod As String
pday = 8
pnight = 12
shour = Hour(st)
smin = Minute(st) + shour * 60
If (shour >= 8 & shour < 20) Then
stod = "day"
Else
stod = "night"
End If
ehour = Hour(en)
emin = Minute(en) + ehour * 60
If (ehour >= 8 & ehour < 20) Then.................
End(xlUp) Leave Last Row
Jun 20, 2007the below code adds a new row with data to the last blank row on the sheet how do I change it so that it leave the last row and inserts above it.
the last row is a sum of the columns ....
Selecting Using End(xlUp)
Apr 29, 2008I have a line of code used to select an area to be copied and pasted somewhere else
Range("A1:" & Range("AD65536").End(xlUp).Offset(0, 0).Address).Select
however the spreadsheet that supplies the data this selects has been changed and now the last column AD is empty and so this no longer works and selects only the first row of data.
Ideally I need a way of selecting all the rows which have data in, from columns A to AD, based on recognising the last row using column N rather than the last column. I'm not sure this is possible though.
End(XlUp) For Last Used Row In Column
May 16, 2007I have copied a piece of code and am trying to understand how it work. The scenario is that the following values are in Column A (starting with cell A1) i.e. A1 contains the value 81 and A5 contains the value 124:
81
44
713
997
124
I can't understanding the working of the following line of
iRow = Worksheets("Sheet1").Cells(Rows.Count,1).End(XlUp).Row
Here's my understanding:
The focus is moved to the last row of Column #1 in Sheet1. This is achieved by
".Cells(Rows.Count,1)" Then the focus moves up to the first cell that contains any value. This is achieved by
".End(XlUp).Row"
I was expecting that after execution of the above code, iRow it will hold the value 124 (which are the contents of the 1st row that is encountered when the code executes ".End(XlUp).Row"). However the debug window shows that iRow contains the value 5? Seems like that contrary to my understanding, iRow is holding a pointer to A5?
End(xlUp).Row Not Finding Last Row/Cell
Aug 30, 2006After searching the forum, I thought I'd found the solution to pasting in the next empty row. I have a macro in one workbook (well, there's 17 of them!) that selects a specific sheet's UsedRange - less the heading row - and copies it (this works). I then switch to the master workbook and click another button to paste the data; the macro finds the correct sheet and pastes the data (1000 records) but when I paste data from the next workbook, it starts at A1 instead of ws. Range("A" & (LastRowA + 1)).
Sub PasteRCdata()
Dim ws As Worksheet
Dim LastRowRec As Long
Set ws = ActiveWorkbook.Sheets("data1")
LastRowRec = ws.Range("A65536").End(xlUp).Row
On Error Resume Next
ws.Range("A" & (LastRowA + 1)).PasteSpecial xlValues
LastRowRec = 0
Application.CutCopyMode = False
End Sub
Here's the code that copies
Dim rng As Range
'code here to select the correct sheet
Set rng = ActiveSheet.UsedRange
rng.Offset(1, 0).Resize(rng.Rows.Count - 1, _
rng.Columns.Count).Copy
Can (xlUp) Skip Blanks And Zeros
Feb 12, 2007Is it possible to run Range("A64000").End(xlUp).Select and have it skip the blanks and zeros until it hits an actual number?
View 9 Replies View RelatedCheck If Cell Is Empty Before XlUp
May 19, 2007I dont know if after you search it will let you enter Xl. I had already search the threads and can't explain with out using XlUp.
Sheets("Input Data"). Range("D6:AO505", Worksheets("Input Data").Range("D510").End(xlUp)).Copy Sheets("Matrix").Range("B52")
But Sometimes there will be no data in the range and this code will copy the row above the array D5:AO5 and paste in the Matrix2 range B52 which is the catalist for a cascade of errors. The only thing I can think of is to use named ranges - But a this stage when the calculations fallover - well a little anoying
Xlup And Calculate - Take Value Of Total And Subtract It From Subtotal
Dec 7, 2011I have several columns of sub-total and total as shown in the screen print. I need some code that will allow me to take the value of total and subtract it from sub-total. The number of rows changes weekly so I cannot simply state =f10-f11
I thought xlup and offsetting would be a good way to do it, but I'd still need to assign a cell number.
Start Shift And An End Shift
Nov 18, 2009I have a Start Shift and an End Shift time,
Start Shift = 2009/11/10 09:27:06 (GMT-6:0)
End Shift Time= 2009/11/10 15:13:03 (GMT-6:0)
eg. Total Time = 5.3 hrs
I would like to take if from this format, and calculate the total time difference. Sometimes the GMT codes may be -5:0 if that means anything. For the cell "Total Time" I only need it to have a decimal format.
Executing Sub Within A Sub
Jul 17, 2008I have a combobox which is used to select data (stock symbol) from a list. Following selection of the stock symbol, a VBA routine is invoked from a radio button which accesses the internet to get data for the selected stock. Currently, this is a two step operation. I tried to cut out the need to click on the download button by calling the GetData sub inside the combobox sub as shown in the code below.
View 14 Replies View RelatedNot Executing Second Sub
Apr 30, 2013Why the second sub is not executing?
Code:
Private Sub RolloverYear_Click()
Application.ScreenUpdating = False
Dim s As Variant
Dim resp As Long
resp = MsgBox(prompt:="You are about to clear ALL current year payroll information. Are you sure you want to continue?", Buttons:=vbYesNo)
If resp = vbNo Then
[Code] .......
Executing Multiple SQL Statements At Once
Oct 4, 2008if it is possible to use a batch query to execute more than one SQL statement at once from Excel. Something like this:
View 9 Replies View RelatedExecuting Two Different Commands With Same Button
Dec 17, 2008I just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
View 6 Replies View RelatedProcess Of Executing Macro
Aug 30, 2009I wanted to know If there a way to hide the process of executing macrob (vba)?
I have a long macro that runs on a file and I want to hide the process. I know there is an option to it, I just don't know it.
Executing The Same Subroutine For All Checkboxes
Mar 6, 2008I have 60 checkboxes on my spreadsheet and basically, when any of the checkboxes are clicked on, the same action should be performed.
The only way I know how to do this is if I were to write the same code 60 times... one for each checkbox_click() method.
Executing Code In Different Sheets
Apr 2, 2008I have a workbook with several worksheets. The numbers entered by the user in the cells C7:C9 of sheet "A" will be used to calculate some values in sheet "A" as well as in sheet "B".
Calculations on both sheets involve macros: macro "scale" on sheet "A" and macro "sort" on sheet "B".
I used this code to execute macro "scale" on sheet "A" triggered by the Worksheet_Change function:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("C7:C9")) Is Nothing Then
Exit Sub
Else
scale
End If
End Sub
now, I want to execute macro "sort" on sheet "B" practically at the same time (with the same worksheet_change condition for sheet "A")
All off my attempts resulted in running "sort" in sheet "A" which is not what I want. I couldn't get it to execute the macro in the other worksheet.
Already tried "With Worksheet("B") and "Dim ws As Worksheet, Set ws = Worksheets("B") - no luck...
Error Trap Always Executing
May 22, 2009The error trap does work when there is an error, but it also runs at the end of the code when there isn't an error... I'm not sure what I've done wrong. When I test with data that is correct, it still runs through the code when it gets to the bottom. Have I put the error trap in the wrong place?
I have put in bold the section of the code with the error trap.
Option Explicit
Const TargetDB = "Group Life Pricing Tables v0.1.accdb"
Sub HMUK_Val()
Application.ScreenUpdating = False
'define variables to be used in the process
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim fld As ADODB.Field
Dim sSQL As String
Dim SchemeInfo As Integer
Dim CurrentAge As Integer
Dim CurrentRow As Integer
Dim CurrentSex As String
Dim Message
'check that Scheme data has already been entered
For SchemeInfo = 1 To 13
If Sheets("Working Info").Cells(SchemeInfo, 2).Value = "" Then
Message = MsgBox("Please ensure all Scheme information has been entered before processing member info", vbOKOnly, "Warning")
Exit Sub
End If
Next SchemeInfo
Add Spreadsheet While Executing Query
Dec 10, 2009(Excel 2003)
I've a macro (I recorded) that executes a query (Oracle) and returns rows that exceeds the max (65539). How do I go about adding another sheet therefore allowing the query to continue?
I know how to do it via opening a text file and importing, but do not know how to do it with the use of a query.
Executing Checkboxclick With Code
Mar 21, 2007I have a series of checkboxes that I would like to select/deselect on mass, without having to manually click them individually...
Each of the CheckBox_Click routines change the visibility properties of images.
Changing the CheckBox value with code (true/false)
CheckBox.value = True
will alter the checkbox, but not execute its code...
And
Run "CheckBox_Click"
did not do it either.
How do I simulate the clicking of the CheckBox, with code?
Worksheet_change Executing Selectively
Apr 4, 2007I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.
When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.
The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!
I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.
My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.
Time Delay When Executing Macro In VBA
Mar 14, 2013I am trying to see if it is possible to create an intentional delay when executing a macro. Basically I would like to pause the macro for 5 seconds and then continue with the rest of the code.
Is such a thing possible with Excel?
Auto Shutdown Code Not Executing
Nov 20, 2007I have a workbook which autosaves and closes if no data is input for 10 minutes. It resides on a drive accessable by all our team and is set so that only one person can have read/ wrote access at a time. It tests for read only, shuts down if it is and saves and shuts down if not.
I have noticed that it doesn't work if the workbook is waiting for input.
I.e. someone starts to enter text, or something, in a cell, then goes off to make a coffee or whatever leaving the entry cursor sitting there blinking. It will not shut down after the ten minutes with no input.
Automatic Break When Executing Code
Mar 29, 2005I have finaly completed my project to include all the bells and whistle needed to make an ok task a bit more exciting. However, i am having a problem when the code is executing. It seems to "break" at random points in the process. I am not able to duplicate this error at my home (nor do i want to) and I can not quite figure out what is causing this as it only happens at my work computer. I have tried my coworkers computer and the code executes flawlessly like at my home.
Strangely enough, when the code breaks I am able to hit 'continue' and it continues on its way until the next hiccup. Please assist as this fluke is causing my brain to spiral.
Vba Executing Text Strings As Code
Apr 5, 2007if I can send text to a macro and have VBA treat the text as a line of code?
Suppose in a worksheet in cell A1 there is the following "text"
msgbox "hi there"
can you get vba to do the following:
Sub runtext()
Mytext = sheets(1).range("a1").text
XXXXXX Mytext
End Sub
where "XXXXXX" is a method or command that will cuase vba to evaluate the text string and run it as a line of code (returning a message box saying "hi there")
I don't want to send variables/objects to an existing method in VBA - I want to send the method to VBA....
Finding Item In Array Then Executing Code?
Apr 25, 2014I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook
If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
Check Users Permissions Before Executing Code
Apr 13, 2011I have a file I created which works fine for me, on my machine at least but there are two issues I'm trying to sort out.
The first issue is I need to share the file with others who may not have the same access rights. I have something loading in the Workbook_Open event which I want to bypass for users who do not have access to a specific folder. So I was trying to check their access using Dir(path) = "" at the top level folder to see if any files are present (which there are). My assumption was that if it finds files it's safe to assume they have permission and it's ok to continue, otherwise they don't in which case I want abort the rest of the code. This seems to work fine for me but I tried testing with someone I know does not have access and it gave her a compile error.
Part of the code in macro utilizes FileSystemObject which seems to be the line where the code bombs on my coworkers machine. The FSO seems related to appears related to the Microsoft Scripting Runtime reference, but it's not enabled on my machine or any of the others. I vaguely remember having to do something on my machine awhile back for the life of me don't remember what it was.
The second issue is an MS Forms error: "Could not load some objects because they are not available on this machine." appears when opening the file on three of the machines I tested but it does not appear on my machine. I've tried looking at the references and could not find any differences between the machines. I pored through various postings online and it appears it might be worth re-registering the DLL/OCX files but we need admin rights to do that so I will need to open a request with our support team.