I am trying to see if it is possible to create an intentional delay when executing a macro. Basically I would like to pause the macro for 5 seconds and then continue with the rest of the code.
Is such a thing possible with Excel?
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.1"
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.2"
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.3"
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.4"
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.5"
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.6"
etc . . .
Basically, I just recorded a macro to change the cell value. This code continues to 4.8 . . .Is there a more efficient way to code this??
Also, I'd like to add a time delay (say +-5seconds) between each step. So basically it would say:
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.1"
[CODE THAT DELAYS FOR A TIME, THEN GOES TO THE STEP BELOW]
Range("A1").Select
ActiveCell.FormulaR1C1 = "3.2"
[CODE THAT DELAYS FOR A TIME, THEN GOES TO THE STEP BELOW]
I have code that generates random numbers 1 - 90, what I would like is when the command button is pressed the numbers are generated every 5 seconds, I have attached the workbook.
View 5 Replies View RelatedI need a code which will take a lump of data, B2:AW366 and cycle through the data in a single cell (A1)
So to clarify Cell A1 should cycle through:
B2
C2
D2
E2
...
...
...
AU2
AV2
AW2
B3
C3
D3
E3
.....
.....
Continue until cell AW366 reached.
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
I'm downloading data from a database that takes sometimes up to a minute to download the data. However I have a sum function in the macro that calls the cells that the downloaded data will be in. The problem is the sum function is occuring before the data is downloaded so the sum is always 0. Any way to build in a delay timer?
Is there a way to delay the result of a cell formula by three seconds or so? For example, I need to delay the result value of cell B12 for 3 seconds.
I have created a macro that goes to a report application. The report application runs a script that extracts certain parts of various reports (the script asks for user input to pull the various reports) and exports the data to a spreadsheet. The script gets one report, writes the data to a spreadsheet, gets the next report, appends the data to the spreadsheet, etc. The macro then moves and formats the data in a customized way to be put to second spreadsheet. My problem is that the macro tries to format the data before the script has completed - how can I stop the macro from running until the script has finished? The script varies in run time - anywhere from 1 to 5 minutes.
View 2 Replies View RelatedI wanted to know If there a way to hide the process of executing macrob (vba)?
I have a long macro that runs on a file and I want to hide the process. I know there is an option to it, I just don't know it.
I am using Office 2007 and perhaps that is my issue. When executing the macro, I get double the page references than there actually are. My workbook has approx. 330 pages and when the macro finishes I have over 700. Certain tabs have a different page setup, and I assume that the macor only takes the regular pagination into consideration. I have landscape as well as portrait setup.
I also receive the errors upon completion in the bolded areas:
Sub CreateTableOfContents()
' Copyright 1999 MrExcel.com
' Determine if there is already a Table of Contents
TOCFound = False
For Each s In Worksheets
If s.Name = "Table of Contents" Then
TOCFound = True
Exit For
End If
I'm working on a spreadsheet designed to track total overtime hours worked in a year; on the spreadsheeet is a column to keep track of each day's total OT, the week's total OT, as well as a column to track the year's total. There is a formula in the week total, but the year total is calculated via a macro (day of the week total, added to the existing year total, result updated, so, each day has it's own button and macro). We have a shift that works a different week than the shift that needs to track overtime, but still must be included in the list.
Therefore, I created a column to place the shift designator so there can be recognizable diffrerentiation. With quite a bit of help from this board, and others, I've created (or been kindly given) the following macro (this is just a part of it) to total the day's overtime and existing year overtime and input the result into the cell. I now need to have this executed only when the condition I specify (say, in cell D1) is met (that would be the shift, for example the text M1 or SST). Please note, the week totals are only for user reference - they do not come into play for calculations of year totals. The below macro actually takes the totals from a day of the week and adds it to the existing year total, placing the result in the year total column.
When running a macro is there a way you can execute code on another sheet within a workbook without being in the original sheet?
I seem to have a problem if I accidentally run a macro not on the original sheet whereby the code is executed and fills over data not in the desired sheet and the previous cells information is lost and the only way to fix the problem is to close the workbook and re-open a saved copy as you can't undo?
I don't know what exactly is happening, but every step of the macro is happening every 1 second. Literally, the BPM is 60. It will execute a step in the macro every second, when in other macro's i've made, it zips right through as if it was on fast forward.
View 9 Replies View RelatedI can download my data from the web. I can set it to download every so many minutes. But, I have to select run on my vb program to complete calculations and put data in correct format/sheets. I am trying to put a delay/timer in the program so it will refresh on itself and I will not have to keep selecting program run. If I put this in program it appears to refresh in a timely manner however I do not get any data on the sheets ? I have tried the wait routine and the if now = time + routine
View 11 Replies View Relatedis it possible to put a delay of 1 second between these 2 lines?
Private Sub cmdsave_click()
Sheet14. Range("c1000").End(xlUp).Offset(1, 0) = Sheet14.Range("c1000").End(xlUp)
1 second delay here
Sheet14.Range("c1000").End(xlUp).Offset(1, 0) = Sheet14.Range("c1000").End(xlUp)
End Sub
I want to close a spreadsheet on a timed event. i can manage the timed close but i need to reset the timer if any action occurs. I have attached what i have so far...
View 4 Replies View RelatedI’m using live data and was wondering if it’s it possible to trigger B1 to change its value from ‘no’ to ‘yes’ 20 seconds after cell A1 changes its value from 0 to 1?
View 9 Replies View RelatedIf for example:
I place number 7 in cell A2, A3, A12 and A22. I want to know the delay this particular number has. Looking at the example placed before the pattern should be the following (A2) 0, (A2-A3) 1, (A3-A12) 9, (A12-A22) 10. After A22 there's is no more number 7 therefore the delay in the example is of 3 i want this to change automatically until the next 7 appears. I've given an example, from C1 to P1 i have written 14 numbers i would like to know the delay of all these numbers.....
I don't know any way ask this question without attaching an example. But the problem itself is pretty easy to explain. On the attached worksheet, whenever anyone makes a change to the information in column C (labeled as Act. Chicks) this triggers a worksheet change that makes that cell have a red font. It also triggers a routine (in a standard module) that updates textboxes that continually display a running total.
Here is the problem: After the information is entered, and the routines have finished executing, there is an incredibly annoying delay of about three seconds. That is, it takes three seconds before you can even select a different cell. This is very difficult for the user to deal with, especially when she has a great deal of information that she would like to enter very quickly. What is strange to me is that if I run the routine for the Worksheet Change within the VBE, I get the delay after the last line of the code (in the standard module) has been executed. In other words, I can't see any code that is running during this long "pause." What is the computer doing during this time, and what can I do to fix it?
I have a combobox which is used to select data (stock symbol) from a list. Following selection of the stock symbol, a VBA routine is invoked from a radio button which accesses the internet to get data for the selected stock. Currently, this is a two step operation. I tried to cut out the need to click on the download button by calling the GetData sub inside the combobox sub as shown in the code below.
View 14 Replies View RelatedWhy the second sub is not executing?
Code:
Private Sub RolloverYear_Click()
Application.ScreenUpdating = False
Dim s As Variant
Dim resp As Long
resp = MsgBox(prompt:="You are about to clear ALL current year payroll information. Are you sure you want to continue?", Buttons:=vbYesNo)
If resp = vbNo Then
[Code] .......
Trying to find a way to close outlook from excel workbook close. If outlook is open then delay excel workbook 45 seconds from closing.If outlook is not open then close excel normal. Here is what I've tried with no luck
[Code] .....
Workbook Name Changes – But Workbook Does Not For Five Seconds?? MS Office Excel 2003 / SP3 Installed. I have noticed an odd occurrence from time to time while switching between workbooks. When I switch from one workbook to another, (typically via the “Window” pull down – but the same result happens when switching workbooks on the tabs at the bottom of the screen), the “switched to” workbook name will instantly appear at the top of the application, but the actual switch to the selected workbook is delayed for several seconds, (five seconds or so).
While not a major issue, it is annoying. I suspect that it is a memory allocation issue, (I have a Duo CPU System / XP Pro / 2 GB RAM), and with that in mind I have both restated MS Excel and also performed a complete re-boot. While either option does (seem) to result in the issue being (temporally) removed from my machine, it does return. I may go for several days without this issue occurring, and then it appears for no known reason
I have a workbook that has many simple functions moving data around to different sheets and processing some if statements on some of the data. The problem that I am running into is all of the data is initially pulled in from a SQL DB, and I believe that the workbook is calculating many of it's if statements, prior to all of the SQL data being loaded, therefore, many of the worksheet formulas are coming up with the wrong result. Is there a way to delay the calculation of all the basic worksheet functions, so that I can ensure that all the data is in the workbook from SQL, before they all fire. I have attempted to use Tools--Options--Calculation--Manual Calculation, but it appears that even though I have things set that way, all of the formulas in the workbook have already pulled their values through.
View 2 Replies View Relatedbeen checking out 1/2 a second wait instead of a 1 sec wait
and would like to know it you can do this
timer thing
Dim x As Single
x = Timer
While Timer - x < 0.5
Wend
more than once
it works the first time and then it sort of skips it
or is there ANOTHER way of having a delay of less than a second?
Total amount to pay by D -
2839300284
Description of Customer
Txn Date
Amount Paid
[Code].....
I have the following code saving a copy of a spreadsheet as a backup every 30 minutes. The problem is the save code is running as soon as the file is opened. I want to save only after the file has been open for 30 minutes. The way it is now if I open the sheet up and something is wron the backup has already been overwritten by the messed up sheet. Will someone please let me know what needs changed to eliminate the inital running of the code?
Sub do_something()
sec = 1800
when = Now + sec / 60 / 60 / 24
Application.OnTime when, "do_something"
Application.DisplayAlerts = False
ThisWorkbook.SaveCopyAs "S:QUALITYTest Results Spread SheetBackup of Riser MezRiser Mez backup.xls"
Application.DisplayAlerts = True
End Sub
I have used Chip's StringConcat code [url]
When I first entered the function code as a formula on the worksheet, the result was instant and correct.
However, if I change the contents of one of the cells in the stringconcat range, the result does not change.
I need to edit (eg F2 then enter) either the cell with the text or the cell with the formula for the result to update.
If I highlight the column where the formula is used and Find / Replace to change "=" for "=", they all update at once (tip I learn't here)
Has anyone experienced this or have any ideas why it may happen?
Notes:
I am using Excel 2000 (work)
I have 6 cols of info (I to N),
These 6 columns contain formulae that basically copies plain text from the same row in Cols A to F. (Since not all the left hand side cells are full, the formula copies down the value above if the cell isblank, or copies the cell value if there istext)
Formula is in Cell G2 and reads
=stringconcat("; ",TRUE,I2:N2)
Code is stored in the Module1
I have 1 header row (Row 1)
I have 16 rows of text (Rows 2 to 17)
Not all rows have text in all 6 columns, but the are no blank cells betweeen data working left to right
I need our IT Admin to install Excel Genie!
if it is possible to use a batch query to execute more than one SQL statement at once from Excel. Something like this:
View 9 Replies View RelatedI just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
View 6 Replies View Related