What I want to do is make a simple text link inside of a cell so when it's clicked on it executes the CommandButton(x) VBA script.
I'm guessing =HYPERLINK is going to be the best method.
Like so:
=HYPERLINK("Forms.CommandButton1","E-Mail")
What is the syntax for executing a 'SHIFT+xlUP' function in an Excel macro?
View 4 Replies View Relatedtrying to write a formula in a VB to some cells:
View 3 Replies View RelatedA UDF function seems to interfere sometimes with the rest of the workbooks entire process for some reason.
I could use the CEILNG function to work around the glitch, but it does not seem to allow the flexibility required because it takes everything to 1. So for example if a Value is 9.24, CEILING will Sum to 10 when when it must be 9, unless I'm missing something.
But if the Value is 9.25 or 9.26 then rounded value must go to 10
The basic math required in the formula bar then is: ...
I have over 60 sheets within a workbook. There are some sheets that I want to hide or unhide depending upon the macro. I have the MR and searched in several areas but keep coming up blank with how to either select or hide these sheets.
This is from the MR:
Sheets(Array("Process", "Utilities", "CodeRef", "DataRef (3)", "DataRef (2)", "DataRef", "Dept Summary New", "Summary_Dept", Summary_ Monthly")).Select
When I try to use this in the code it errors out.
I have the following code, which executes just fine:
[Code].....
The problem is that I need to run this again in a different column, and the data is held in another sheet that I have given the variable StepTwo to.
I'm not sure of the syntax to do this. Basically - this is what I need the code to do:
[Code] ....
Understandably this is totally incorrect, but it's the best I can do to explain what I'm actually trying to do....
The two parts of SUMIF are both held in a workbook that I've given the variable "StepTwo" to. Both sets of data are also held on Sheet(1) of that workbook.
I trying to populate cells with a correlation function using VBA, I have set up dynamic references/arguments for the fuction to take on however I just can't get it to work. Currently instead of populating the formula into the cell, it's just populates it as a string based on what's entered below =correl(Ystart &":"& yend, xstart&'":"'& xend").
FYI - The correl function takes on two ranges,. I've predefined these below.
Sub testing()
lastcell = ActiveSheet.Range("c575").End(xlUp).Row
firstcell = ActiveSheet.Range("c1").End(xlDown).Row
Ystart = ("b" & firstcell)
yend = ("b" & lastcell)
xstart = ("c" & firstcell)
xend = ("c" & lastcell)
Range("c575:c580").Formula = "=correl(Ystart &":"& yend, xstart&'":"'& xend")"
'this works
'Range(xstart, xend).Select
End Sub
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
I´m writting a macro. It works find until a certain point. When I want to change some outputs of the macro without changing the syntax, it display an error mesage while runing the macro. It says Else without If. Which is quite disturbing because the Else was not creating any problem before. Here is my macro before I changed the conditions (this one work nicely)
Sub Copy_Sheet_Beta()
Set wba = ActiveWorkbook
On Error Resume Next
If IsWorkbookOpened("Projekt.xls", "C:Documents and SettingsfrederikSkrivebordRedd Barna") Then
Workbooks("Projekt.xls").Activate 'In case open, just activate "Projekt"
Else
Workbooks.Open Filename:="C:Documents and SettingsfrederikSkrivebordRedd Barnaprojekt.xls"
End If
Set wb = Workbooks("Projekt.xls")
wb.Activate
If Not SheetExists(wba.ActiveSheet. Range("C1").Value) Then
MsgBox "overall doesn't exist!"
Else........................................
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
View 4 Replies View RelatedWe receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
#####################
149 entries
Column A - Date - OK
Column B - Customer_Phone - Errors (Should be 11 digits)
Row 21 - Customer_Phone - Error (Not 11 digits)
Row 108 - Customer_Phone - Error (Contains letters)
Column C - Outcome - OK
Please correct and re-check.
#####################
I have a table with 3 columns of dates and then a column with Set # that I
feel in the box #.
I need to see how many items processed for each set per day.
Example:
[url]
The problem is that it counts the correct amount but not with the correct
dates.
The formula that I use is:
=SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
I have a combobox which is used to select data (stock symbol) from a list. Following selection of the stock symbol, a VBA routine is invoked from a radio button which accesses the internet to get data for the selected stock. Currently, this is a two step operation. I tried to cut out the need to click on the download button by calling the GetData sub inside the combobox sub as shown in the code below.
View 14 Replies View RelatedWhy the second sub is not executing?
Code:
Private Sub RolloverYear_Click()
Application.ScreenUpdating = False
Dim s As Variant
Dim resp As Long
resp = MsgBox(prompt:="You are about to clear ALL current year payroll information. Are you sure you want to continue?", Buttons:=vbYesNo)
If resp = vbNo Then
[Code] .......
if it is possible to use a batch query to execute more than one SQL statement at once from Excel. Something like this:
View 9 Replies View RelatedI just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
View 6 Replies View RelatedI wanted to know If there a way to hide the process of executing macrob (vba)?
I have a long macro that runs on a file and I want to hide the process. I know there is an option to it, I just don't know it.
I have 60 checkboxes on my spreadsheet and basically, when any of the checkboxes are clicked on, the same action should be performed.
The only way I know how to do this is if I were to write the same code 60 times... one for each checkbox_click() method.
I have a workbook with several worksheets. The numbers entered by the user in the cells C7:C9 of sheet "A" will be used to calculate some values in sheet "A" as well as in sheet "B".
Calculations on both sheets involve macros: macro "scale" on sheet "A" and macro "sort" on sheet "B".
I used this code to execute macro "scale" on sheet "A" triggered by the Worksheet_Change function:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("C7:C9")) Is Nothing Then
Exit Sub
Else
scale
End If
End Sub
now, I want to execute macro "sort" on sheet "B" practically at the same time (with the same worksheet_change condition for sheet "A")
All off my attempts resulted in running "sort" in sheet "A" which is not what I want. I couldn't get it to execute the macro in the other worksheet.
Already tried "With Worksheet("B") and "Dim ws As Worksheet, Set ws = Worksheets("B") - no luck...
The error trap does work when there is an error, but it also runs at the end of the code when there isn't an error... I'm not sure what I've done wrong. When I test with data that is correct, it still runs through the code when it gets to the bottom. Have I put the error trap in the wrong place?
I have put in bold the section of the code with the error trap.
Option Explicit
Const TargetDB = "Group Life Pricing Tables v0.1.accdb"
Sub HMUK_Val()
Application.ScreenUpdating = False
'define variables to be used in the process
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
Dim fld As ADODB.Field
Dim sSQL As String
Dim SchemeInfo As Integer
Dim CurrentAge As Integer
Dim CurrentRow As Integer
Dim CurrentSex As String
Dim Message
'check that Scheme data has already been entered
For SchemeInfo = 1 To 13
If Sheets("Working Info").Cells(SchemeInfo, 2).Value = "" Then
Message = MsgBox("Please ensure all Scheme information has been entered before processing member info", vbOKOnly, "Warning")
Exit Sub
End If
Next SchemeInfo
(Excel 2003)
I've a macro (I recorded) that executes a query (Oracle) and returns rows that exceeds the max (65539). How do I go about adding another sheet therefore allowing the query to continue?
I know how to do it via opening a text file and importing, but do not know how to do it with the use of a query.
I have a series of checkboxes that I would like to select/deselect on mass, without having to manually click them individually...
Each of the CheckBox_Click routines change the visibility properties of images.
Changing the CheckBox value with code (true/false)
CheckBox.value = True
will alter the checkbox, but not execute its code...
And
Run "CheckBox_Click"
did not do it either.
How do I simulate the clicking of the CheckBox, with code?
I have a Worksheet_Change method in my sheet module which has suddenly begun working selectively. I have several target ranges in my worksheet that I need to watch for changes. One range of cells is all pull-down menus (a list of electrical loads through excel's validation), another two cells are looking at the name and location of an electrical panel.
When the user selects an electrical load, the worksheet_change method updates a legend of definitions. When the user enters a new name or location, the method updates similar fields elsewhere on the same sheet.
The problem is, excel has stopped executing worksheet_change when a load is chosen or location entered. It only executes when the aforementioned load and location are deleted. However, the name field triggers worksheet_change just fine!
I have attempted to put breakpoints on the worksheet_change method; Excel does not even execute the method as described above. I've tried breaking on the toggling of Application.EnableEvents (which occurs early on in the execution of worksheet_change). I currently have a global watch on Application.EnableEvents and I'm quite sure it's TRUE before I attempt to trigger a worksheet_change event.
My next step is to create a brand new workbook and copy my spreadsheet and code into it. I'll post the results of that experiment.
I am trying to see if it is possible to create an intentional delay when executing a macro. Basically I would like to pause the macro for 5 seconds and then continue with the rest of the code.
Is such a thing possible with Excel?
I have a workbook which autosaves and closes if no data is input for 10 minutes. It resides on a drive accessable by all our team and is set so that only one person can have read/ wrote access at a time. It tests for read only, shuts down if it is and saves and shuts down if not.
I have noticed that it doesn't work if the workbook is waiting for input.
I.e. someone starts to enter text, or something, in a cell, then goes off to make a coffee or whatever leaving the entry cursor sitting there blinking. It will not shut down after the ten minutes with no input.
I have finaly completed my project to include all the bells and whistle needed to make an ok task a bit more exciting. However, i am having a problem when the code is executing. It seems to "break" at random points in the process. I am not able to duplicate this error at my home (nor do i want to) and I can not quite figure out what is causing this as it only happens at my work computer. I have tried my coworkers computer and the code executes flawlessly like at my home.
Strangely enough, when the code breaks I am able to hit 'continue' and it continues on its way until the next hiccup. Please assist as this fluke is causing my brain to spiral.
if I can send text to a macro and have VBA treat the text as a line of code?
Suppose in a worksheet in cell A1 there is the following "text"
msgbox "hi there"
can you get vba to do the following:
Sub runtext()
Mytext = sheets(1).range("a1").text
XXXXXX Mytext
End Sub
where "XXXXXX" is a method or command that will cuase vba to evaluate the text string and run it as a line of code (returning a message box saying "hi there")
I don't want to send variables/objects to an existing method in VBA - I want to send the method to VBA....
I am trying to find an item within an array and then VBA could execute code.
Here is an example:
[Code]....
LookupItems =("text", "value", "book") or should I acutally be using Split("text,value,book",",")
For Each sht in ThisWorkbook
If sht.name = array(LookupItems) Then.....execute code
[Code] ....
So basically in this example I want to loop through all the sheet names in the workbook and if any of the names in the arrary are found it will execute the code for those particular sheet names.
I know alternatives are the select case or write an if statement for each value I am looking up or even use an OR for each value to lookup; but I just wanted to see if this method was even possible as it would be less coding.
I have a file I created which works fine for me, on my machine at least but there are two issues I'm trying to sort out.
The first issue is I need to share the file with others who may not have the same access rights. I have something loading in the Workbook_Open event which I want to bypass for users who do not have access to a specific folder. So I was trying to check their access using Dir(path) = "" at the top level folder to see if any files are present (which there are). My assumption was that if it finds files it's safe to assume they have permission and it's ok to continue, otherwise they don't in which case I want abort the rest of the code. This seems to work fine for me but I tried testing with someone I know does not have access and it gave her a compile error.
Part of the code in macro utilizes FileSystemObject which seems to be the line where the code bombs on my coworkers machine. The FSO seems related to appears related to the Microsoft Scripting Runtime reference, but it's not enabled on my machine or any of the others. I vaguely remember having to do something on my machine awhile back for the life of me don't remember what it was.
The second issue is an MS Forms error: "Could not load some objects because they are not available on this machine." appears when opening the file on three of the machines I tested but it does not appear on my machine. I've tried looking at the references and could not find any differences between the machines. I pored through various postings online and it appears it might be worth re-registering the DLL/OCX files but we need admin rights to do that so I will need to open a request with our support team.
I have a Userform that has 4 Textboxes (named TextBox1, TextBox2, TextBox3 and Textbox4) and 7 Option Buttons (named OptionButton1, OptionButton2, OptionButton3, OptionButton4, OptionButton5, OptionButton6 and OptionButton7). I need to validate that the following criteria is met:
TextBox1.Value Does not = ""
TextBox2.Value Does not = ""
TextBox3.Value Does not = ""
TextBox4.Value Does not = ""
One Option Button is selected. (It can be any one of them 1-7, Just one needs to be selected).
Is there an easy way to check this data before executing a sub procedure to move the data?? Here is my try at it:
Code:
Sub CheckData()
'Is this the correct way to check data ?
If TextBox1.Value = "" Then
TextBox1.SetFocus
MsgBox "Please enter a Batch Date", vbCritical
[Code] .......
