I am trying to do a formula that will add two different sums and so far I have this:
={SUM(IF('FAC Open POs'!$F:$F='Cash Waterfall'!$B6,'FAC Open POs'!$V:$X))}+SUMIFS('Cash Report'!$O:$O,'Cash Report'!$S:$S,'Cash Waterfall'!$B6,'Cash Report'!$T:$T,'Cash Waterfall'!G$4))
But I keep getting an error. I know that the formulas apart work, but I keep getting an error with trying to use an Array formula like this.
I have a number of cells, with a rule as follows, but within each cell the company name and month vary, over 836 cells, so I cannot do a find and replace so wanted to know if there was a way of adding the following part to the rest of the formula within the 836 cells in one go, rather than tediously going through each cell and copying/pasting.
The part I would like to add to the various cells - 'Master Quote Sheet'!$H$18:$H$6021, "Won"
Existing formula (the varying parts within the different cells are the "02.2014" and "Company Name"
=SUMIFS('Master Quote Sheet'!$J$18:$J$6021, 'Master Quote Sheet'!$E$18:$E$6021, "Direct", 'Master Quote Sheet'!$A$18:$A$6021, ".02.2014", 'Master Quote Sheet'!$D$18:$D$6021, "Company Name")
Attached file should be self-explanatory.
I want to be able to set sum range using lookup or match.. For example if I change B2 value to Nov-13, I want it to sum column K.
I am trying to do a sum of data that contains three requirements - The country has to match either the USA or Canada and then it needs to pull for only a certain month (i.e. Jan, Feb, Mar) and then for that month only pull either Airfare, Hotel, Per Diem, or Car Rental. Basically looking for a way to Sum only the specific category for a specific time frame.
View 9 Replies View RelatedI have a report for which I would like to set up a Quarterly summary section. There are 6 working teams listed in my table and I have created two cells with data validation to allow me to specify which team and for which quarter I would like to pull data. My intent is to have a formula in one cell which can extrapolate the quarterly team information based on the values in the data-validated cells.
My worksheet is set up so that:
The data table (tblD) contains metrics for all teams for the full yearTeam names appear in Column A of the table and the reporting month appears in Column BCell M10 has data validation so that the only choices are: Q1, Q2, Q3, or Q4Cells X1:X4 contain the quarterly values mentioned aboveCells Y1:Y4 contain array references, so that Cell X1 = Q1 and Cell Y1 = {"January", "February", "March"}Cell N10 contains a VLOOKUP which returns the appropriate array from Column Y based on value in Cell M10Cell L11 has data validation so that the only choices are the 6 team names
Now I was able to get quarterly information by manually typing the 3-month array into my formula like so:
Code:
=SUM(SUMIFS(tblD[TU5],tblD[Team],$L$11,tblD[Month],{"January","February","March"}))
BUT! When I try to use a formula which points to the VLOOKUP cell (N10)--thus allowing me to make the display dynamic--the result is always 0.
Code:
=SUM(SUMIFS(tblD[TU5],tblD[Team],$L$11,tblD[Month],$N$10))
While inspecting the formula in the formula bar, I noticed that the values listed in the array appeared with double quotes (i.e. "{""January"",""February"",""March""}"). I tried every permutation of typing the array in the lookup cells I could think of, but none would allow my formula to properly calculate the total I needed.
{"January", "February", "March"}
{January, February, March}
January, February, March
Although I don't often utilize arrays in my formulas, I do employ them from time to time. I'm hoping there's some factor I might have overlooked which keeps my formula from working. is there an issue preventing array references stored in cells from being used in formula?
I'm trying to pull thesum of huge number of columns in this case the range of pulling the data is B2:E7 based on two criteria (B8 and B9) The result is on B11
Sheet1
*
A
B
C
[Code].....
I started changing it and then realized that I can keep going by adding new elseif's but i think an array would be a better option(i think). But i am really a monkey see monkey do kind of vba user. i can backwards engineer but cant come up with it.
here is code
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("$z:$z")) Is Nothing Then
If Target.Value = "NO CONTACT" Then
Target.Offset(0, 1) = Date + 1
ElseIf Target.Value = "NO CNTC FCL" Then
Target.Offset(0, 1) = Date + 1
ElseIf Target.Value = "NO RES" Then
Target.Offset(0, 1) = Date + 1
you see i keep adding "results" and assigning lift dates. what i would idealy want to do is take my list (that i use in a drop down box in $z) and next to it assign the number of days i want to set the next call date(the offset 1 cell) to be. then have the code just read cells a1:a10(the results) and assign the corresponding b1:b2(the amount of days to wait to call). I can keep adding elseif's but then if i decide to add new results codes or change the days from 1 to 5 i have to go back to the code.
I have two large spreadsheets that are arrays. Column A contains 40 items in both files. Columns B through X contain unique names. The arrays are filled with dollar amounts. Is there some formula or function in Excel whereby I can easily combine both spreadsheets, essentially adding the dollar amounts for each corresponding cell?
View 9 Replies View RelatedI am looking to be able to alter my table_array section in VLOOKUP to adjust in date.
exampe: =vlookup(A4,'[Daily report - August 25.x;sx]Facilities'!A4:AY100,84,FALSE)
and I want to be able to change the August 25 -> August 26 repeating so that as I drop the next date in it will update to the correct tab.
I have the dates above so if I could somehow just the date to another cell instead that would work as well. I just do not know how.
Essentially I need to grab data from a separate workbook everyday and compile it to one master list.
I'm trying to automatically add and remove one criterion from an autofilter without disturbing the previous existing criteria The autofilter code sounds like this:
Code:
ActiveSheet.Range("$A$1:$L$47").AutoFilter Field:=6, Criteria1:=Array( _
"Clay", "Grass"), Operator:=xlFilterValues
How would I go about referring to this array and adding another item called "Hard" to any pre-existing elements in this array?
I plan on attaching this code to a button and use it as a filter, so when the button is pressed, the item will be added to the list of criteria, and if it is "un-pressed" the item will be removed.
On this is a column of Categories and a Column of sizes. I want to use these in a user form. The user will select their Category from a drop down list and the second drop down list will include only the sizes that appear next to the chosen category So for example in the attachment if the user chose 'AUD' as a category they would get the size choices of, '2x4 insert', '2x4 replica' and 'A4L' in the other drop down menu.
The master list of sizes will have to remain on a worksheet as this is what other operators will amend from time to time.
Im trying to add hyperlinks to cells using an array but im getting "run time error 424 - object required" error. THe code im using is:
Code:
Sub hyper3()
' not WORKING - ARRAY to add hyperlink to cells
Dim rngIn As Range
[Code]....
I have an Excel workbook with two sheets "DataSheet" and "Actual Peaks", "DataSheet" contains a column with dates and a column with values. "Actual Peaks" has a bunch of dates listed in a column. For each date in 'Actual Peaks', another column goes back to the "DataSheet" finds the date, then starts adding values until a specified sum is reached, once the sum is reached, it returns the date at which the sum was reached. However, I have found that sometimes it is off by a day or two.
See the attached workbook for a much clearer example : Excel_forum help 7-23-14 DD validation.xlsx
I'm trying to find the maximum over a set of conditional sums, preferably using an array formula or some other single cell solution. My experience with array formulas so far has been to copy things off the internet and modify slightly to my needs.
Here is how my data is set upA
B
C
D
Trait1
Trait2
Value
Trait 1 to Max over
Cat
LongHaired
3
Cat
[code]....
The "Trait1" I am summing over will remain constant for each refresh of the spreadsheet. I want to return the max value of the sum over each "Trait2" that falls into the "Trait1" category.
In this example for Trait1 of "cat" I would return 8 (5+3) that corresponds to LongHaired cat.If I were writing straight SumIf and then Maxing over I would write
Code:
=SUMIF(C:C,A:A,$D$2,B:B,"LongHaired")
for each unique Trait2 and then Max over the set of outputs.
I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
I am using a SumIfs formula and I want to add a criteria that only sums the Sum Range when it is between two given dates (01/01/2013 and 31/12/2013).
View 2 Replies View RelatedUsing TODAY() in SUMIFS
so, this formula works as expected:
I've been looking for an alternative to SUMIFS as I have a sheet I need backwardly compatible with Excel 2003. I've looked at SUMPRODUCT which I understand is a good alternative to COUNTIFS but does not allow for summing. I've now moved on to looking at an array formula I picked up from an internet search, but it's not working properly for me. The crux of my Excel 2007 formula is:
View 2 Replies View RelatedI have the following formula in Col C
=SUMIFS(C$275:C$379,$A275:$A$379,{"Idle Time","Oil stock *"})
The criteria "Idle Time" & "Oil stock losses" are in Col A.
I would like to add the values in Col C based on "Idle Time" & "Oil stock losses" which are in Col A
The formula =SUMIFS(C$275:C$379,$A275:$A$379,{"Idle Time","Oil stock *"}) adds the idle time value correctly, but ignore the values of Oil Stock losses
I have the formula below which sums range dv77:dv81, if dy77:dy81 is not an error. Works perfectly.
={SUM(IF(ISERROR(DY77:DY81),"",DV77:DV81))}
However I cannot seem to modify it correctly to work with a sumifs formula. Could someone please show me how it might work?, or a workaround?
For reference the sumifs would sum range(DV77:DV81), if range(E77:E81) is "Neutrogena" and range (A77:A81) is "9".
I've got a problem involving several Dim'd Variables needing to be added up, they're all Dim'd as Variants though as they can be either strings or numbers at any time.
I need a formula (VBA) to add them up (to add their actual numeric values - not just a "1" if they contain a number) and ignore them all together if they contain string values.
I have a userform that I'm using to add data to a worksheet, with the following
Private Sub CommandButton1_Click()
Dim OutSH As Worksheet
Set OutSH = Sheets("Sheet1")
OutSH.Cells(nextrow2, 1).Value = Surname.Value
OutSH.cells(nextrow2,2).value = ID.value
OutSH.cells(nextrow2,3).value = Date.value
......
I need to ensure that duplicate entries are not made for the same person on the same date. The ID is unique to each person.
IF statement that can check for a duplicate and then come up with a dialouge box with some custom text, and then exiting the sub?
I am trying to create a master spreadsheet to sum up other tabs for the number of funds that are going operational by month. The date is formatted at "January 31,2013".
See attachment as an example : Client Schedule Example.xlsx
Having issues trying to do a sumifs function using multiple criteria to get a final total. I want to sum a list of values that have different transaction types from a transaction table. The only working way I have found is to do a sumif and create a CSE formula for it and drag it down and sum to the total. I am looking for a way to sum the the entire list of transaction types I need from the transaction tab and get to the total value rather than have to use a CSE and then sum. Basically I want to take out the sum of the CSE results....Is there anyway to do this?
View 5 Replies View RelatedI have the following figures in my spreadsheet and I have been trying to use SUMIFS. However, I don't want to count values in a continuous way, rather than that, I need to count the values ONLY until the number that is being counted repeats.
Example: Spreadsheet from Column Q1 to Column Q6:
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
On this case, the Excel would count the number 8 five times in this array. However, If there were more number just below the number 8, it would count them as well and that's not what I am looking for.
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
Q7 5
Q7 8
What do I need is not to count them when the number being counted has stopped to appear eventhough it can be found at Q7.
For my needs the answer should be that the number 8 was counted 5 five times rather than 6.
Here is a sample of the formula I am currently using.
Formula:
[Code]....
This works perfectly for what I was needing but I am adding more criteria and running into a problem. I am rolling together usage for parts with different part numbers but the same function in order to reduce SKUs (as well as capture replaced SKUs) needed. These are located in Columns A:G. what i would like to add is more conditions to where the parts are going. Currently I have one location located in cell B2. To analize my usage further, I want to add another location in C2. So i want my formula to look like this.
Formula:
[Code] .....
when I use this it still only adds up with what matches in B2 regardless of the value in C2. Conversely, I can get the formula to work if I take out the extra part numbers.
Formula:
[Code] ....
Attached is a spreadsheet. The first worksheet is a summary of the data inputted in the second. I am trying to total the "total spend field depending on whether it is "Extra Works", "Spares & Materials" or "Other" which works fine. I would now like to sum depending also on the month that it was spent.
Order Tracker 2.xlsx
Using the SUMIFS function, I could successfully get the expected results from extracting data from 15 base separate excel files (from where the data will be extracted). However, whenever I am re-opening my master sheet(where I want the data to reflect) it gives me #VALUE!
Only after opening all my 15 base sheets, my master sheet fetches data.
I am trying to solve the problem I am having for my weekly report. Currently our Reporting has to be done Via Excel, with no reporting consule to have dynamic ability. I am trying to put a formula table together so all my manager has to do is dump raw data and the calculations take care of the totals for the table. I am running into the issue of when trying to return certain data at a certain date. So here is what I have and what I need (If it can be done without changing the formula each week)
For the MTD calculation I have:
=SUMIFS('Raw2'!$L$2:$L$902317,'Raw2'!$O$2:$O$902317,"=2013",'Raw2'!$M$2:$M$902317,"=11",'Raw2'!$N$2:$N$902317,">
=1",'Raw2'!$N$2:$N$902317,"<=31",'Raw2'!$B$2:$B$902317,"=0000013")
The raw data wont have information past the current day of the month so the <=31 allows for the current month to calculate correctly.
Where I am having trouble is the Previous Month Formula:
=SUMIFS('Raw2'!$L$2:$L$902317,'Raw2'!$O$2:$O$902317,"=2013",'Raw2'!$M$2:$M$902317,"=10",'Raw2'!$N$2:$N$902317,">
=1",'Raw2'!$N$2:$N$902317,"<=24",'Raw2'!$B$2:$B$902317,"=0000013")
This returns the data, but I have to change the "<=24" every week to the date that I want up to.
I have tried =eomonth(today(),-2+1) but that is not allowed as the Criteria.
Following the syntax of the SUMIFS formula --> Can "criteria_range1" be the same as "criteria_range2" ?
It didn't work for me and I got the result as 0.