SUMIFS Only UNTIL The Number Repeats
Apr 8, 2014
I have the following figures in my spreadsheet and I have been trying to use SUMIFS. However, I don't want to count values in a continuous way, rather than that, I need to count the values ONLY until the number that is being counted repeats.
Example: Spreadsheet from Column Q1 to Column Q6:
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
On this case, the Excel would count the number 8 five times in this array. However, If there were more number just below the number 8, it would count them as well and that's not what I am looking for.
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
Q7 5
Q7 8
What do I need is not to count them when the number being counted has stopped to appear eventhough it can be found at Q7.
For my needs the answer should be that the number 8 was counted 5 five times rather than 6.
View 14 Replies
ADVERTISEMENT
Aug 20, 2013
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
View 9 Replies
View Related
Dec 24, 2011
So i need a way to find the minimum number in a given set of numbers without there being multiple minimums. For example if you had 1,2,3,4,5,6,7 the minimum would be 1. If however you had 1, 1, 2, 3, 4, 5....i want excel to recognize there are multiple minimums (two 1's) and produce a warning (i realize this probably needs to be coupled with an if statement).
View 3 Replies
View Related
Apr 12, 2012
I would like to use an (I think) easy SUMIFS formula. In this case I'm using only 3 criteria, and 2 of them work perfectly. With the third I want to SUM only IF the series begins with 112 in the example.
Criteria 1 Criteria 2 Criteria 3 SUM
SYS 1 111234 105
SYS 1 111345 111
ORA 2 112456 33
SYS 2 112998 70
SYS 2 112856 56
[Code] ..........
From what I've found out so far I could use "112*" ore something like it, but I cant get it to work.
View 2 Replies
View Related
Jul 5, 2013
How do I use the SUMIFS formula for ranges greater/less than some number?
In my spreadsheet I need to sum the values that are less or equal to January 1st, for example. How do I do it? Because this formula allow to find values equals to something.
View 5 Replies
View Related
Nov 27, 2005
I am getting repeats when there should not be any. Here are the formulas and
below is a portion of the worksheet. You can see hhow the Section and Work
Order are repeating. It should only show a one time entry....
View 10 Replies
View Related
Feb 10, 2014
I have two sheets for club membership, one for recording payments another for the members list. Each membership is valid for a year, they either become a member or renew. I have for example:
Payments
Aaron Adams Member
Barry Burns Renewed
Charlie Clegg Renewed
Membership
Barry Burns Renewed
Charlie Clegg Renewed
I want it to copy the new member to the membership sheet but not any existing members.
View 3 Replies
View Related
Jul 15, 2014
example attached: If data repeats in column A, then add those corresponding values in column B. Can this be done without VBA?
View 5 Replies
View Related
Feb 27, 2014
In my worksheet Column Y contains multiple duplicates and Column Z contains values associated with each duplicate. I want to check every row in Column Y for multiple duplicates then find the difference between their associated Column Z values.
View 1 Replies
View Related
Aug 22, 2008
I want to delete the repeats in one column. for example:
2 Drawer Chest-MOD1 725
2 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725
I would like this to look like:
2 Drawer Chest-MOD1 725
Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 725
View 9 Replies
View Related
Dec 29, 2006
I have four columns of numbers that range between 1 through 44 and span 100 rows. Each row shows a unique combination as shown below:
Row 1 - 07 18 11 09
Row 2 - 03 29 08 05
Row 3 - 01 20 11 44
Row 4 - 09 17 14 24
Row 5 - 18 11 20 26
etc...
Can anyone give me some tips on creating a VBA script that will scan a hundred rows of the data shown above and identify for me the rows where number pairs and number triples repeat? For example the data above shows that the pairs "18 , 11" repeat on Row 5 and Row 1. Can EXCEL perform such a task with the right VBA script or forumula? Is a VBA script necessary or will using an ARRAY be the correct way?
View 5 Replies
View Related
Jul 15, 2009
I haven't figured out a way to do this, but my goal is to (ideally) use a "IF" statement that will recognize the 1st "2" on the list and ignore the repeats
To better explain what i mean by this, attached to this post is a Excel file which clearly describes what I'm looking for
View 2 Replies
View Related
Dec 26, 2010
I made custom menu with these instructions: [URL]....
Problem is that when I right click my makro keeps copying itself. Ten times right click=ten my macro in the right click menu. It means that
Private Sub Workbook_Deactivate() doesn't work as it should be?
View 2 Replies
View Related
Jul 12, 2007
Cell 1 has 1,2,3,4,5
Cell 2 has 2,4,5,7,9
While combing them into one cell, there will be no repeat of the same number. So the outcome would be
1,2,3,4,5,7,9
The main point here is to merge the two cells together and eliminate the repeated numbers and sorting the numbers in a cell. Or if anyone knows series of steps not just one function to get to this.
View 9 Replies
View Related
Jan 2, 2009
programming in VBA as compared to python, java, and c++. My question is relatively simple. I have a listbox that I want to populate. I've figured out how to populate it using the ListFillRange, but can't figure how to populate so that I have a list of items, but doubles or repeats don't show up. I have a list of 1's, 2's, 3's, and 4's and I only want 1, 2,3,4 showing up as well as any additional numbers added to the list.
View 9 Replies
View Related
Feb 15, 2010
I have a sheet with 12k plus lines of data... Attached is a sample.
I am trying to sort by any one of the column headings, without losing the order of the ADDRESS field.. Sometimes there are 2 lines, sometimes there are 3 lines of ADDRESS... Also, the first column, "DBA" has 2 lines sometimes 3 lines per entry... When I try to sort, it tells me I have to unmerge the cells.. but then when i sort, it alphebetizes everything seperatley so the addresses get splut up...
View 4 Replies
View Related
May 8, 2006
I'm trying to write a code that will generate random numbers and no number appears more than onece.
For I = 0 To 3
For J = 0 To I
Do
n = Int(4 * Rnd) + 1 'random number generated
Array1(I) = n 'random number settled in an array
If (I = I - J) Then 'checking for the same place in array
numsOK = True
Else
If Array1(I) = Array1(I - J) Then ' comparing two different places in an array
numsOK = False
Else
numsOK = True
End If
End If
Loop Until numsOK = True
Next J
Next I
View 9 Replies
View Related
Jun 21, 2008
I don't believe my earlier post was a duplicat thread. I posted the original thread, then posted a LINK to the original thread. I didn't even ask the question in the link, so there was no way someone would have wasted time answering the question from there. I didn't think I was breaching protocal. Anyway, since both instances of the thread were closed, here is the re-post.
I've recently been trying to learn a little about pivot tables. In the example attached, I have 2 worksheets. One holds raw data collected from suppliers, the other holds a default pivot table created from that data.
View 13 Replies
View Related
Dec 11, 2013
I am trying to create a schedule that will randomly populate with names from a list. I have learned how to do this with numbers. How can I do this with a list of names? How can I make sure that no names repeat?
In one column, I used =RAND()
In the cells where my numbers display, I used =INDEX(ROW($A$1:$A$24),RANK(Z17,$Z$1:$Z$24))
View 1 Replies
View Related
Jul 30, 2012
I have row of data from cell A2:E2 to A5000:G5000
in Column B I have customer account number, and they should not repeat but some reason some customers repeat more than once,
so out all column A B C D E if there if customer repeats only thing can be same is customer account number
so for example below, account number 12 repeats so I want to only few all account number 12 so I can compare both row and delete the only i need to delete and go back to original
DATE
ACCOUNT#
FIRST_IN
LAST_IN
SOMEVALUE
1/22/2012
12
A
B
2321
[code].....
View 4 Replies
View Related
Oct 3, 2013
I attempting to create a formula that will create random numbers in a column without repeats. For example, I have a spreadsheet with two columns. The first column I want to contain the random numbers and the second column will contain names. I just need the formula to create the random numbers once.
View 2 Replies
View Related
Jul 1, 2008
i have a unique transposing situation and i need a script to transpose my data. i haven't encountered anything like this yet so i wonder if its possible
my data is currently in this format:
Object1, Property1, Value
Object1, Property2, Value
Object2, Property1, Value
Object2, Property2, Value
i'd like to transpose it to:
........... Property1 Property2
Object1 Value Value
Object2 Value Value
View 9 Replies
View Related
Dec 27, 2011
My balance column is formulated for 60 rows. I am currently on row 23. The balance is repeated down the entire sheet range I have set. How do I keep the balance from showing next to an empty row without losing the formula?
View 1 Replies
View Related
Jul 9, 2009
I need to transpose a three column worksheet with thousands of rows containing repeats based on the value in Column A (between 2 and 11 consecutive repeats), into rows with no repeats, and the values from the repeated rows into new columns. Column A has a unique numeric value corresponding to the repeated rows. Column B has 1 of 11 values and Column C has 1 of 4 values.
The worksheet looks like this:
1 abc x
1 def y
2 ghi x
2 abc n
2 lmn x
2 def z
2 jkl y
I need to make it look like this:
1 abc x def y
2 ghi x abc n lmn x def z jkl y
I tried using the following code, but it dropped all the values from column C:
Sub kTest()
Dim a, i As Long, w(), k(), n As Long
Dim dic As Object, ws As Worksheet, s As String
Set dic = CreateObject("scripting.dictionary")
dic.comparemode = vbTextCompare
With Sheets("sheet1")
a = . Range("a2:b" & .Range("a" & Rows.Count).End(xlUp).Row)
End With
I am attaching a workbook " Book 1" that has the results from the above macro in the first worksheet "Final Report", the origninal data "orig data", and the format I need to get the data into "needed data".
View 5 Replies
View Related
Mar 19, 2009
I have a sheet with 3,000 rows and only two columns. Column "A" consists of 20 to 30 different names, column "B" consists of 50 to 60 different products. I need to be able to evalute the value in column A and copy, paste special transpose all values in Column B that have the same value in column A. As an example if cells A1 through A5 is "Arizona" and cell B1 is Broccoli, B2 is Cauliflower, B3 is Apples, B4 is Oranges, and B5 is Bananas, I want to copy B1 through B5 and paste special transpose to cell C1.
This then would need to loop all the way to the bottom of the data in Column A looking for a change in value. The attached file called Sample Data has two tabs. The one titled "report" shows the raw data, the one titled "Final" shows how I would like the results to appear (column L)
View 6 Replies
View Related
Feb 25, 2013
I'm trying to find the maximum over a set of conditional sums, preferably using an array formula or some other single cell solution. My experience with array formulas so far has been to copy things off the internet and modify slightly to my needs.
Here is how my data is set upA
B
C
D
Trait1
Trait2
Value
Trait 1 to Max over
Cat
LongHaired
3
Cat
[code]....
The "Trait1" I am summing over will remain constant for each refresh of the spreadsheet. I want to return the max value of the sum over each "Trait2" that falls into the "Trait1" category.
In this example for Trait1 of "cat" I would return 8 (5+3) that corresponds to LongHaired cat.If I were writing straight SumIf and then Maxing over I would write
Code:
=SUMIF(C:C,A:A,$D$2,B:B,"LongHaired")
for each unique Trait2 and then Max over the set of outputs.
View 3 Replies
View Related
Jan 1, 2014
I am using a SumIfs formula and I want to add a criteria that only sums the Sum Range when it is between two given dates (01/01/2013 and 31/12/2013).
View 2 Replies
View Related
Jan 20, 2009
Using TODAY() in SUMIFS
so, this formula works as expected:
View 2 Replies
View Related
Jun 17, 2009
I've been looking for an alternative to SUMIFS as I have a sheet I need backwardly compatible with Excel 2003. I've looked at SUMPRODUCT which I understand is a good alternative to COUNTIFS but does not allow for summing. I've now moved on to looking at an array formula I picked up from an internet search, but it's not working properly for me. The crux of my Excel 2007 formula is:
View 2 Replies
View Related
Aug 11, 2012
I have the following formula in Col C
=SUMIFS(C$275:C$379,$A275:$A$379,{"Idle Time","Oil stock *"})
The criteria "Idle Time" & "Oil stock losses" are in Col A.
I would like to add the values in Col C based on "Idle Time" & "Oil stock losses" which are in Col A
The formula =SUMIFS(C$275:C$379,$A275:$A$379,{"Idle Time","Oil stock *"}) adds the idle time value correctly, but ignore the values of Oil Stock losses
View 4 Replies
View Related
