Im' working on an ROI spreadsheet at work and looking to add multiple IF statements leveraging one cell. an example is this:
If E51 is > 1 and < 100001 then the cell should equal "PREMIUM"
If E51 is > 100000 and < 175001 then the cell should equal "PREMIUM PLUS"
If E51 is > 175000 and < 250001 then the cell should equal "ENTERPRISE"
I have a formula already prepared in the spreadsheet that will come up with a value anywhere between 1 and 250,000 in cell E51. I need that cell value to be PREMIUM, PREMIUM PLUS or ENTERPRISE; depending on the value and can't work out the correct formula.
I have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
I want to create a formula that will turn B2 in floors if A2 has /1 with its formula, Ceilings if it has /2, walls if it has /3, and M&E if it has /4. For example 456-401/2-1569 in cell A2 will populate ceilings in B2. I know I can create If statements but I can only figure out how to do this to search for one text and populate one word. I know Vlookup is possible but this spread sheet will be blank and as people populate there information I need the cells to automatically populate the data into the B column. how I can create the right formula?
I’m trying desperately to get this if statement to work
If Workbooks("Master.xls"). Sheets("intro"). Range("A2") <> "" And _ Workbooks("Master.xls").Sheets("intro").Range("B2") = "" Then For Each vaFileName In .FoundFiles ProcessDataCrit1 vaFileName Next If Workbooks("Master.xls").Sheets("intro").Range("A2") <> "" And _ Workbooks("Master.xls").Sheets("intro").Range("B2") <> "" And _ Workbooks("Master.xls").Sheets("intro").Range("C2") = "" Then For Each vaFileName In .FoundFiles ProcessDataCrit2 vaFileName Next If Workbooks("Master.xls").Sheets("intro").Range("A2") <> "" And _ Workbooks("Master.xls").Sheets("intro").Range("B2") <> "" And _ ..................................
Basically what it should do is to start the code ProcessDataCrit1 if there is a value in A2 but not in B2 or C2, start ProcessDataCrit2 if there is a value in A2 and B2 but not in C2 and start ProcessDataCrit3 if there is a value in all three cells. The formula is working for ProcessDataCrit1 as soon as there is a value in B2 the formula is not working.
I am using Excel 2007 and am attempting to write multiple IF statements within a cell. This multi-cell validation would be used to validate that A=B and C=D but A&B do not equal C&D as illustrated below:
I have an IF statement. I am wondering is it possible to automatically make the colour of the result for true yellow and red if the statement is false. This is my if statement =If(Monday!G4="NFR","YES","NO")
Basically the if statement is if Sheet "Monday" cell G4 is equal to NFR then it returns a "YES" which I would like to come up coloured Yellow. If it is not equal it puts a "NO" which I would like to come up coloured as Red.
In column A I have the debt name i.e. the company that owes us money. In column B I state the amount owed to us In column C the month by which the income is due. This is selected from a drop down list: M1, M2, M3 etc up to M12 In columns D through O, I have the forecast of what payments will be recieved in months 1-12
In the next cell I want to total payment that will be recieved by the due date. So, if the the cell in Coumn C says M5, then it would just add up the amount forecast in months 1-5, but if the first cell equals M2, then it would add up the forecats for M1 and M2. What formula do I put in here?
e.g. Manually enteres numbers would look like this, but I need a formula for cells in column P
A B C D E F G
[Code] .......
The only way I can think of doing this is with nested IFs but the limit is 7 and I need 12. I have used 12 monhts here for example. In fact on the real version I have 48 months and obviously can;t do 48 nested IFs.
Any way in which i can 'paste link' and then 'paste link' again without overwriting the first link. example i have a row (say A1 to H1) with varying values in Book1 Sheet1. i know how to copy and paste a link to that onto, lets say Book2 Sheet1. but now in Book3 Sheet1 i want to copy and paste a link from A1 to H1 over to Book2, but have both links open for auto updates.
Been trying to work this one out and have ended up banging my head against the wall.
Basically I have a spreadsheet, in the first column is the person's name, in the secon which team they are in and following this a cell for each day of the month with their availability.
The team name is a selection from a list, the availability is 1-6 (different levels of availability)
I'm trying to do subtotals at the bottom for each separate team, so the very last row each of the cells for each is added up:
Name Team 1st 2nd 3rd 4th 5th 6th 7th etc. Mr X ___1st___1______2__1 Mr Y ___2nd_______2________5__5__5 Mr Z ___1st___1____________3__3__3
Total 1st: 2 2 1 3 3 3 Total 2nd: 2 5 5 5
So basically the formula in the last row goes along the lines of:
Add each cell in the column IF the team name = 1st
Is there a way to write a forumula that read, if it's January, add column A1:A10, if it's February, add column A1:B10, if it's March, add column A1:C10 and it's April, add column A1:D10
I have attached a sample spreadsheet for your review. I think I need to combine multiple IF statements into one single statement. See column I:
There is currently a formula in Column I that looks at Column H and computes a ROUND formula based on this information. Unfortunately, this formula only works if Column J says "MB". If Column J says "Minutes" then I need Column I to compute with this formula: =IF(H2<30,0.5,ROUNDUP(H2/60,1))
How can I combine this with the current formula to get what I am looking for? Here is the current formula (for MB): =IF(H2<0.125,0.125,ROUND(H2,4))
I have attached a copy of my monthly work schedule. Sorry if it looks too noobish but I am. The question I have is on the schedule right now, it uses to of the same schedule, one is called request off and the other the final. The request off right now is where all changes are made, and they reflect on the final. I did it this way because I could not figure out how to make the cells autofill according to the day of the week, like if it was friday i needed it to fill in the shifts and normal days off automatically.
What I am trying to do now is eliminate the need for the second schedule, the request off one. I think I have figured out how to have the cells autofilled according to the day of the week, and also let the user enter in other stuff such as sick, vacation or whatever, and have it autofill if the cell is left blank, using vba. this is what i have so far, and it is working I was just wondering if it was possible to set it up for a range of cells instead of having to enter each one in manually.
If my input page B13 is either New Lease In-House or New Lease w/Co-Borker andmy input page B43 is - then take cell D57 in my Analysis report, mulitply it by cell B32 from Input page and divide it by 2, otherwise, take cell D57 on the analysis report, mulitply it by B42 on Input page and divide it by 4. I think I have a mess up with my brackets. This is what I have: =IF((OR('Input Page'!B13="New Lease In-House",'Input Page'!B13="New Lease w/Co-Broker"))AND('Input Page'!B43="-",'Analysis Report'!D57*'Input Page'!B32/2,'Analysis Report'!D57*'Input Page'!B32/"4")
I would like to add an AND function so that the IF statement also looks at the month which is represented in this case as $E$7, the formula I have been trying is:
I have a userform with 14 independant checkboxes on and would like it when the operator presses the 'go' button for the code to look at each box and if ticked put a "Y" in the column on a spreadsheet associated with that checkbox.
I have this portion of code set for each checkbox within the sub function, but it's a lot of code for something relatively simple:
I have are two listboxes set up, one with all the states, the other with 7 possible variable selections. So in my case I have 371 (DC, Virgin Islands and Puerto Rico are included as states in this) possible combinations here. With each combo the user needs to be able to enter up to 2 years of quarterly data (8 quarters, so 2968 pieces of data possible) and then press a button to save that data to a specified location which I will need to access at run of the overall macro.
Is there an easier way to do this then to simply assign each combination a cell? Maybe an If State = AK and Variable = TUR then find column = AK & row = TUR (per quarter) type solution?
I'm using one spreadsheet "Take Off", to pull data from a cell which dictates an objects shape, based on this shape I have a very large IF statement that pulls data from an adjacent cell where an objects dimensions are entered, the statement than proceeds to use these dimensions to calculate the weight of the object.
I've run into the problem with only 7 IF statements, I have gone online and tried to figure out how to avoid this since it is a common problem, but I can't figure out how to do it, most of the examples show very simple and basic formulas. I am unable to figure out how to translate this into my IF statement where I make reference to many cells as well as us differant formulas within the IF statement.
My latest solution was to breakdown the IF statements and try to my my own functions but I think I am too green to have done this properly. Any guidance would be greatly appreciated.
The following is the code I'm working with followed by how I tried to remedy the situation:
and so on until hCalc, but when I put them together in a cell like this: =aCalc()+bCalc()+cCalc()+dCalc()+eCalc().... I get an error #REF.
I realize a problem might be that I'm referencing a specific cell within my formulas, and many examples online show cells referenced in the form =A$1$, is there a differant way for referencing a cell, because currently I rely on Excel to automatically do this by way of relative reference.
ADDED: Ok I scrapped making the functions because I'm not sure and I did some research on VBA so I tried this one:
Function Weight(Shape As String, Amount As Double, Dimension As String, Optional Length As Variant) If (Shape = "BPLT" Or Shape = "L") Then If (Amount > 5) Then Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 + Get_Word(Dimension, 5) / 1000 * Get_Word(Dimension, "Last") * 7850 Else Weight = Get_Word(Dimension, "First") / 1000 + Get_Word(Dimension, 3) / 1000 * Get_Word(Dimension, "Last") * 7850 End If
But when I try to put Weight(C6,D6,F6,E6) I run into the error "Sub or Function Not Defined"
I have a worksheet and in one of my columns I can have multiple values, this could either be a valid numeric value, .e.g "Trace" or a value such as >1.5 or it could be blank.
Depending on the value I then want to return a different result in another cell.
In the example I have tried my data is in cell E8
I have tried the following formula and failed miserably, I'm not sure whether IF or IF OR can cope with this.
I'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I need to multiply the result of the 3 if statements as shown below in one cell Each of these 3 if statements output an integer and I need to multiply the value of each of these 3 output integers to get the final output integer. syntax of multiplying if statements outputting an integer?
Here is the first required formula, which will go in cell P7:
If N7>=75 a value of "Y" should be returned. If not, a value of "N" should be returned. BUT if N7 is blank, a blank should be returned.
Here is the second required formula, which is more complicated, and will go in cell Q7:
(1) If Cell P7="Y", then a "Y" needs to be returned in the cell. (2) If Cell O7>=2, then a "Y" needs to be returned in the cell. If not, then a "N" needs to be returned. (3) If Cell P7 is blank, then the cell needs to remain blank.
Here is the final formula, which will go at the bottom of the page.
I need the Q column to return an average of the number of "Y" values, not counting the blanks as numbers. (For instance, if there were 18 "Y"s, 2 "N"s, and one blank, the value returned would be 0.90.).
