I want to create a formula that will refer to the cell I want by adding a number to the cell reference, not to the contents of the cell. For example, lets say that the cell C11 holds a value of 22. I want to add 4 to C11 to get my formula to reference cell C15, I don't want it to add 4 to the contents of C11 which is 22 and would give me a result of 26. I have a large spreadsheet and I can't just fill down the way I have it now and I don't want to have to retype the formula every time.
I am new to the Macro editing of Excel. I have a list in the first tab that I would like to click yes or no (how to set up a checkbox) and the appropriate column will pop up in the next tab with appropriate header. I would like it to be where the column will pop up in the correct order, so even if one is clicked in the middle, it knows where to put it.
I am trying to say, if the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS) "added to the text "TM", is blank, then write "-", otherwise return the number in the cell 1 column to the left of the cell that matches the text in B2, in the cell range referenced in A1 (CWS)+"TM".
Cell A1 is a data validation list that refers to different ranges. The only difference between those named ranges and the named range I want to reference is the text "TM" comes at the end.
I have a chart with sales data on one axis and inventory on a secondary axis. I have the average of each columns of data and want to add a reference line to each axis with it's average. I have added the averages to my data set, but it only adds the reference line to my primary axis. I actually began by manually inserting two lines to the chart (which seems asinine). They actually didn't print because they weren't actually on the chart, but rather just on the spreadsheet behind.
I'm using Conditional Formatting for an entire column to check the value of each cell and compare it to the value of a cell in the same row but a different column. (Cell Value equals =$D2) It works great until I insert or delete a cell in the formatted column. The reference does not change as one would expect. I've played around with formulae such as =$D2<>$P2 but the reference only changes for the P2, not the D2. I've also tried using =CELL("contents", ADDRESS(Row(),4)) but this causes excel to complain.
In a workbook made in Excel 2003, I have the following for a UserForm:
Private Sub UserForm_Activate Me.Calendar1.Value = Date End Sub
I copied this workbook to a computer with Excel 2007 and it bombs out at "Date" It comes up with a compile error, "Can't find project or library"
In the references window (Tools, References) it has the "Missing: Ref Edit Control" checked and the location at the bottom of this window states "C:Program FilesMicrosoft OfficeOffice11REFEDIT.DLL".
The reference to Office11 is from the computer with Office 2003 as the computer with Office 2007 has Office12.
There is another "Ref Edit Control" in the References window and when I check it and browse to the Office12 folder, highlight REFEDIT.Dll and click on open and in the references window on OK it comes up with "Name conflicts with existing module, project or object library". I have tried to delete the "Missing: Ref Edit Control", change the priority and change the reference in the missing control to Office12 but all to no avail.
How can I change the reference to the Ref Edit Control from Office11 to Office12?
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D 1 Task___________Trigger_____________Days_____Due Date 2 Design begins__Proj OK______________10____10-Jan 3 Specs written__Design begins (A2)____5____15-Jan (D2+C3) 4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.
I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
Trying to get a record of who authorized spending in one of my worksheets and when they did it
I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.
I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.
I have values in a number of cells. Next to them, if there was a value, regardless of what the value is, except blank or zero, i would like the cell to turn blue and if possible have a 1 in the cell.
I've used the conditional formatting, however, among the options, 'less than' is the closest to to getting the color right. The issue is that if the cell has nothing in it, it still colors the corresponding cell blue; because it is not less than the already blank cell. If it is blank, I don't want it to color the cell.
First I would like to say that I am not English nor very good to explain myself so hope the title is according to the forums rules. Now to my problem
I would like to to put in for instance the number 100 in cell A and then the number should appear in cell B. I would like to remove the number in cell A without the number in cell B to dissapear. Then add for instance 50 in cell A to get the number in cell B to add up to 150 and so on. How can I do this? I would like to add that cell B is already connected to a different cell. And I am using Vista.
I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.
i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
If C5 refers to the value in cell C100, C6 refers to the value in C110 ten rows below. C7 refers to C120, ten rows below that and so on. Is there a formula that you use within excel (not a macro) that allows me to copy the C7 formula to C8 so that C8 will reference C130?
I have tried using INDIRECT and OFFSET formulas but cannot do it without an absolute reference to a fixed cell, which defeats the purpose, since I can go into C8 and manually change it to =C130, C9 to =C140 etc.
Currently using Excel 2007 at work and Mac Pro at home. Thought about R1C1 reference, but don't even know how to change to that style on my Mac.
I need to make a cell display the contents of the cell immediately below it, regardless of if there are rows inserted at the referenced row or above or below it on the worksheet. ALSO I need to do this at several additional cell locations down the worksheet. Such as : A1 displays A2, A4 displays A5, A7 displays A8 etc.
Example: I want A1 to display whatever is in the cell immediately below it. In this case A2. I need to be able to insert several rows at row 2 and have whatever new value is now in the A2 position displayed in A1. After the rows are inserted I need the cell that was in position A4 to continue to display the contents of the cell below it.
I tried using the formula in A1 of: =INDIRECT("A2") and it works good except when I insert the rows my similar formulas below the area where the rows were inserted continue to refer to the specific original cell and not the one positioned now below it.