Increasing A Value In A Cell By Adding A New Number To A Connected Cell?
Mar 28, 2009
First I would like to say that I am not English nor very good to explain myself so hope the title is according to the forums rules. Now to my problem
I would like to to put in for instance the number 100 in cell A and then the number should appear in cell B. I would like to remove the number in cell A without the number in cell B to dissapear. Then add for instance 50 in cell A to get the number in cell B to add up to 150 and so on. How can I do this? I would like to add that cell B is already connected to a different cell. And I am using Vista.
View 5 Replies
ADVERTISEMENT
Jun 28, 2014
I've got an excel sheet that has a series of successive numbers down the side from 1-15 per sheet. I've done this by putting the cell formulas as previous row +1. (these are being used as unique reference numbers)
I want to be able to print this out multiple copies of this in one instance without having to manually adjust the first number multiple times then print the sheet. I also want it to be automatically saved as the most recent page printed, so that when it's printed the number continues on from the previously printed sheet.
I found a macro online which I have adjusted to increase a cell by 15 each time it is printed (to change the first number of the row). But I've realised that I'm printing the final page twice if I run the macro again. Is there any way to get round this? If I print 1 sheet there is also no adjustment in numbers.
I also haven't got onto the save part.
This is the macro I am currently using:
"Sub PrintSequence()
'
' PrintSequence Macro
' Macro recorded (altered) 8/16/2005 by Roy Wagner
[Code].....
View 1 Replies
View Related
Feb 5, 2014
I have a 2010 Excel spreadsheet where I have a macro set up to print the page. What I need it to do though is to increase a number in a cell and display it each time I print the page.
View 9 Replies
View Related
Mar 4, 2012
I am seeking some code that will check that the PC / Laptop has an online ethernet connection via it's NIC (Network interface card). I want it to output to the spread sheet to a Conditional cell (Connected / unconnected).
View 2 Replies
View Related
Oct 22, 2007
I'm just fiddling around with excel at the moment and have a created a cell with a value of 16. It represents the number of days an event has been running for.
I'm not sure how to make it increase by +1 every day without me having to open excel and change the value in the cell.
View 2 Replies
View Related
Nov 26, 2008
in a1 I have a number 1, a2 is a number 2. I want to keep on counting down to number 7691. Just do not know how to do this.
View 5 Replies
View Related
Sep 21, 2009
I have a worksheet that I need a piece of code for, Cell E1 is an amendment number that increases every time a new one is put out,
so they can be tracked.
Every time the sheet is saved the value in cell E1 needs to increase by 1.
View 2 Replies
View Related
Dec 4, 2008
i have a question about adding a number to a cell. This is the problem. Each day we track contacts we made in a spread sheet. how could i, lets say type 2 in a cell that already reads 42 and once a tab away from the cell it would change to 44 (add in the background 42+2=44).
View 5 Replies
View Related
Nov 2, 2012
I am trying to calculate the percentage of a number, have it subtotal, and then add to that subtotal another number all within the same cell like so:
20000 + 5% = 21000 + 4000 = 25000
View 3 Replies
View Related
Feb 20, 2014
I should know this and I'm sure its something very simple that just wont come to me. I have two cells, one has "total billable hours" in a month, the second needs to calculate how many days based on that number. So it needs to increase by 1 for every multiplier of 24 in the first cell.
View 3 Replies
View Related
Nov 4, 2008
I have cell F15 which is blank by default, and cell D14 which pulls a value from another sheet (D14's value is =Info!X20). For D14's properties I have it set to show thirds (Custom Property "# ?/3"). I want to make D14 increase by 1/3 for every increment of 60 that F15 contains. For example, let's say D14 is 12. If F15 is 59, it won't change. If it's 60, D14 will be 12 1/3, and if its 180, it'll be 13. I think I'm close, but just can't quite get it.
View 8 Replies
View Related
May 28, 2006
I want to create a formula that will refer to the cell I want by adding a number to the cell reference, not to the contents of the cell. For example, lets say that the cell C11 holds a value of 22. I want to add 4 to C11 to get my formula to reference cell C15, I don't want it to add 4 to the contents of C11 which is 22 and would give me a result of 26. I have a large spreadsheet and I can't just fill down the way I have it now and I don't want to have to retype the formula every time.
View 2 Replies
View Related
Feb 14, 2013
Im trying to develop a formula that sequentially numbers in column a depending on if there is a value in column B
We have documents at work that have alot of text with random spacing between that needs a sequential reference number so would like the formula to be able to look at the value in column b and if its not blank add a number . I would like this number to be the previous cell above + 1
the formula ive started looks something like =if(B10""), ???????,""
can not get excel to reference cell the last cell above with data.
View 3 Replies
View Related
Dec 13, 2008
I would like to place in sequence increasing the numbers of one I creak in a cell.
In the formula I determine it I creak and the corresponding frame number to the placed ones.
The problem is that he is accumulated only the greater and not sequencia it.
1803456781101112
1134567810111280
but,80-80
Function ordenar2(Myrange As Range, num As Integer) As String
Dim Myorder As Double
Dim X2 As String
Dim n As Integer
n = 1
Do While n
View 9 Replies
View Related
Oct 7, 2011
I do receive invoices from my vendors. They send me an invoice in PDF formate. I am using able2extract software to conver the PDF to excel. It is working great but most of the times my vendors enters the items/Case in the description field. Like the example below:
"Bajri Rotla 11 oz.(24)"
I would like to place a "," in between the last character and begining of the first number. In the above case it will be after "a" (in Rotla) and before "1" in (11). If I can do this then I can apply texttocolumn from excel and use "," as delimiter and separate item name from size and case/Pack. Then can use another "Texttocolumn" and separate size and case/pack. If there is a VBA code that can be written for this it would make my life a whole lot easier.
Following are 3 images that I have copied from actual data.
1. Original PDF invoice data that I receive from my Vendor
2. Image of the excel file before formating. This is the format from "Able2Extract" (3rd party software that I use to convert PDF to excel. Works great!!
3. Converted Excel data sheet. This is the way I want to format the data.
View 7 Replies
View Related
Mar 29, 2007
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
Hlookup.xls
View 8 Replies
View Related
Mar 9, 2014
My wife and I run an apartment complex with 2 employees, a manager and a maintenance man.
We use excel to produce a paystub for these employees twice a month.
There are a number of variables including incentives for renting apartments, overtime, variable hours in a pay period etc.
We have a separate spreadsheet for each employee and a separate sheet tab for each pay period named for the pay date... e.g. the first paystub had one sheet named "Jan 15"... the next pay period the paystub had 2 sheets: "Jan 31" and "Jan 15". The third paystub had 3 sheets and so on.
The paystubs have a column with the numbers for the pay period and then a column with the year to date sum (for straight pay, over time, federal withholding, social security, medicare, state withholding, etc.)
Right now I edit the formulas for all these sums for each payperiod. e.g. =sum('Feb 15':'Jan 15'!B35) for the third pay period is editted to =sum('Feb 28':'Jan 15'!B35) for the fourth pay period.
I would like to be able to just copy the prior spreadsheet and not have to find and replace values in 11 spreadsheet cells for each pay period.
I have figured out how to get the name of the current spreadsheet to appear in a cell on that sheet using VBA... but not how to get that cell content to be part of the arguments for =sum(. on the formula bar...
View 2 Replies
View Related
Jun 10, 2014
I want the first 60 rows of column C to be constant meaning C1, C2, C3, C4..C59 and after 60 rows it should start again with C1, C2, C3.....C59 rather than C60, C61, C62. In other words i+1 but after 60 rows i should be reset to 1 and then again increase by 1. how can i implement these changes
[Code] ......
View 2 Replies
View Related
Mar 29, 2007
I am doing a hlookup on a range (possibly over 100 rows). My formula is working but my problem is that it takes too much time to go and manually edit the formula to change the row index number and increase it by one. For example the row index number has to change in order to pull in the right data....eg 5,6,7,8 etc up to over 100. Is there a quick way to do this or do I have to manually enter the row index numbers in over 100 rows?
I am attaching a SAMPLE of data. The actual worksheet is much more larger.
View 6 Replies
View Related
Dec 15, 2008
I have a worksheet where over time I add columns that need to be added in a "Total" cell.
=M3+W3+AG3+AQ3+BA3+BK3+BU3+CE3+CO3+CY3
Above example, the cell being added is 10 columns after the previous one.
Question:
What formula can I use to automatically pull the value from every 10th cell starting with M3?
Preferably every 10th cell till a value I determine... i.e every 10th cell but only for the first 15 occurrences.
(Is this anything to do with the Series command?)
View 9 Replies
View Related
May 6, 2013
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
View 4 Replies
View Related
Aug 13, 2013
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
View 9 Replies
View Related
Jun 10, 2013
i have been working on 2 sheets receiving and selling item and QTY, or in other words i have a Stock IN sheet and a Stock Out sheet
is there some sort of a formula which links 2 cells, columns, together in a way that, if one cell's number increased the other would decrease automatically ?
say iv set 50 in cell a1, i want to set 10 elsewhere and the 50 in cell a1 will automatically decrease from to 40
here's my excel worksheets i uploaded it,
View 7 Replies
View Related
Apr 24, 2014
Trying to get a record of who authorized spending in one of my worksheets and when they did it
I had some VBA code in one of my worksheets which added a time stamp and a user ID to two different cells after the user enters their name. Why it is no longer working, though I suspect after moving the worksheet around.
I would like my users to type their name into cell G65 (which is actually merged from G65-K65). Once the user enters their name, cell L65 (which is actually merged L65-O65) populates with the current time stamp. Also, when the user enters their name into cell G65, I would like cell P65 (which is actually merged into P65-S65) to auto populate. I would like this all of this to go down through line 70.
View 1 Replies
View Related
Apr 28, 2014
I have values in a number of cells. Next to them, if there was a value, regardless of what the value is, except blank or zero, i would like the cell to turn blue and if possible have a 1 in the cell.
I've used the conditional formatting, however, among the options, 'less than' is the closest to to getting the color right. The issue is that if the cell has nothing in it, it still colors the corresponding cell blue; because it is not less than the already blank cell. If it is blank, I don't want it to color the cell.
View 1 Replies
View Related
Jan 13, 2007
I've got a problem involving several Dim'd Variables needing to be added up, they're all Dim'd as Variants though as they can be either strings or numbers at any time.
I need a formula (VBA) to add them up (to add their actual numeric values - not just a "1" if they contain a number) and ignore them all together if they contain string values.
View 9 Replies
View Related
May 9, 2014
I have an excel file that we add data too for assignments and I want the date to auto popuate if the status is changed to Mitigated, Escalated, or offline. I wrote the below function which works but when i open it the next date the current date is written to those cells. creating a function that writes the date when the status is change and then leave the date alone unless the status is changed again.
[Code] .....
I have attached an example of what i have and below is the function
Example.xlsx
View 3 Replies
View Related
May 7, 2014
I want to Adding my one of the cell value in Table1 by the one of the cell in table 2. and i will do the same thing with another cell in Table1. but it will take so much time to do it because my Table1 Has 9 Cols and 200 Rows. And Table2 has same Cols and Rows like Table1, too How to make it faster?
View 4 Replies
View Related
Jun 14, 2014
So i was asked to do a spreadsheet for "counting" electrical items from a project. For instance, quantity of cables, cable trays, electrical equipment, etc.
One of the sheets is called "Cables" and is structured in a database form, i mean, the first row contains the name of the columns (fields) and from the second row will be the records (much like a table in Excel).
One of this columns has to be calculated, for example, Qty (B3) * Measured (C3) = Subtotal (D3). If i put the formula in the whole column filling D:D the size of the excel file grows up to 10 mbs. So to keep the size small, I want Excel to introduce this formula only if it can find a value in Qty (B3).
Is liking adding records in Access, the table should grow with each row completed. We cannot use access, it has to be something the team can handle (they know a bit of Word and Excel, nothing else).
View 2 Replies
View Related
Mar 30, 2009
I have a spreadsheet with two columns and 39900 rows, from that data I want to create two new columns so cell C1 = A143 and D1 = B143, C2=A286, D1=B286, and so on. The row location increases by 143.
The simplest thing I tried to do was to say C1=A1+142, but (knowing it is wrong) I get a #value error.
How can I tell excel to grab these values located every 144 rows below and create two new columns?
View 9 Replies
View Related
