Addition Of Hyperlink To Macro
Jan 16, 2013
I have a macro that basically captures all of the errors in my spreadsheet and summarizes them under 3 columns (Value in Cell, Sheet, Cell) so that I can quickly identify the error message as well as it's location. I wanted to take it a set further and add a hyperlink for each error so that the user can quickly go to the error location to investigate. I really don't care where the hyperlink is located as far as which 3 columns.
Range("G2").Select
Selection.End(xlToRight).Select
Selection.End(xlDown).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
curRow = ActiveCell.Row + 3
[Code] ........
View 6 Replies
ADVERTISEMENT
Nov 19, 2008
make a calculation(addition) and use the answer to multiply against another addition calculation....
The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.
View 2 Replies
View Related
Jul 29, 2008
I have a hyperlink generated from a vlookup that is generated from the result of a combo box click, so the reference in the hyperlink cell will change to whatever sheet the vlookup dictates.
Then I have a macro assigned to a button ( Called 'Go' ) that when pressed clicks on the hyperlink and takes me to that corresponding sheet.
When I recorded the macro, it clicked on the hyperlink cell when it was hyperlinking to let's say Sheet 'April', but if I click on let's say September, in the combo box, then of course the hyperlink now links to the September sheet, but if I click the 'Go' button with the macro attached, it still takes me to 'April'.
surely, the macro simply follows the steps I recorded and therefore should now be clicking on the hyperlink that now says 'September'. Surely, the macro shouldn't REMEMBER that it originally clicked on 'April'.
View 9 Replies
View Related
Mar 17, 2007
I have a workbook with over 40, identically formated, sheets. Each sheet has 96 pages. One page for each roll of carpet. To hunt for the next blank page to use, is time consuming.
So:
On each sheet, Range B207:B303, I have IF formulas that will display the carpet ID number for each page, if one is present, or the cell remains blank. In Range C207:C303, I have Hyperlinks to the pages on the sheet.
I need a macro that will search the Range in column B for the first blank cell, then automatically use the Hyperlink next it in column C. Then I can assign the macro to a button, copy and past the button on all 40 sheets. With one click of the button, I will instantly be taken to the page availabel for data entry on that sheet.
View 4 Replies
View Related
Feb 9, 2010
I have a workbook open and my A column cells are filled with (example) Mike-1 in the first row Mike-2 in the second row and so on. Now I have another folder on the computer with Word documents that I want to hyperlink to. The corresponding Word file is named mike1. So I want Excel to go through column A and Hyperlink to the corresponding Word file.
View 6 Replies
View Related
Feb 26, 2014
clarify here i attached file.
Hyperlink not running while am using hyperlink formula.
Hyperlink_Dout.xlsm
View 5 Replies
View Related
Jan 20, 2009
How do I hyperlink a text box ( button ) to an existing macro?
View 6 Replies
View Related
Nov 21, 2006
I have the following
Private Sub Worksheet_Activate()
Application.ScreenUpdating = False
updateall = MsgBox("Do you want to update the previous balance?", vbYesNo)
If updateall = vbYes Then
ActiveSheet.Unprotect
' clear previous payments
Range("U3").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
' update previous balance
Range("H54").Select
Selection.Copy
Range("G11").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D7").Select
ActiveSheet.Protect
End If
Application.ScreenUpdating = True
End Sub
Now, this works just fine if the user clicks the sheet itself. However, generally they are accessing sheets via hyperlinks, which do not seem to activate this code. Is there a better/different way to ensure when the user gets to a sheet via hyperlink, they still see the msgbox?[/b]
View 9 Replies
View Related
May 3, 2007
Is it possible to make a macro that can search for a file with the same name as a cell's text and then link that cell to the file?
Example, if I had cells that said "One" "Two" "Three" "Four" and "Five" and had a folder in my C drive with 5 files names "One.jpg"... etc could I make the macro search a folder for that file and link to it?
View 9 Replies
View Related
Jun 20, 2006
can i use a hyperlink to call/invoke a macro...?
View 5 Replies
View Related
Oct 23, 2007
I want to use a macro (assigned to a button) to open a file named in a hyperlink.
When I record the macro it results in the file being opened, but when I run the resulting macro it only selects the cell, it doesn't follow the hyperlink.
View 9 Replies
View Related
Nov 5, 2008
adds the file name into column A if it could also hyperlink it to that file. 2nd, Change it so it doesn't start a new workbook and worksheet. I would like it to just run in the Workbook it is in and each time the macro runs or the workbook opens it updates any info that has changed.
View 5 Replies
View Related
Oct 16, 2011
Ive got this macro used to search for a particular code in an excel sheet with about 4000 codes, each assigned a hyperlink.
my goal is to make the user enter the hyperlink automatically in the code upon hitting search.
So far this is what i have:
the problem is that it only works with hyperlinks which are assigned a link (right click assign hyperlink) and not codes which work with a formula for example =HYPERLINK("http://www.google.com", "ABC123")
Sub searchsheet()
'Opens box and ask what do they want to search
searchthis = InputBox("Type in a location keyword.", "Property Search")
'Tells where to search
[Code].....
View 2 Replies
View Related
Oct 4, 2012
I have this macro that I use for taking information based column B grouping it together and putting in a separate worksheet.
What I would like to do is in the master sheet (sheet1) to create a hyperlink for those listed in column B so I can click on it and it takes me right to that worksheet.
Sub exporttoWS()
Application.ScreenUpdating = False
Dim i As Range, LR As Long, ws As Worksheet, wb As Workbook, C As Range
Sheets("Sheet1").Select
Range("A1").Select
'looking at the full length of the file
LR = Range("A" & Rows.Count).End(xlUp).Row
'sheet needs to be named sheet1, all data should begin on row 3
[code].......
View 3 Replies
View Related
Mar 15, 2013
I'm trying to create a macro that I can assign to a clip art pic that will pop up the Insert Hyperlink prompt when I click on the picture. So basically anytime I click on the pic for the 1st time I'd like to be able enter the url address of my choosing but if I were to click on that pic again I want it to go to the Hyperlink address I previously entered.
I should note that I tried recording a macro by first by clicking on Record Macro then press ctrl + k and then click Stop Recording but it wouldn't stop recording. I had to first click Cancel on the Insert Hyperlink prompt and then I was able to Stop Recording so this attempt was unsuccessful.
View 2 Replies
View Related
Apr 14, 2014
I know there are better ways of doing this but I am working with an existing form and I need it to look the same.
Column O on Sheet1 has a link that use to open a document, now all the information is on Sheet2. On Sheet2 I have a macro that hides every Project except for the Project Number the user selects in B4 of Sheet2.
Can I create a link that will:
1) Select Sheet2
2) Enter the Project Number from Sheet1, current Row, column D to Sheet2 cell B4
I know a link can select a worksheet so I have #1 covered but I am stuck from there.
View 2 Replies
View Related
Jul 24, 2014
I am building a dashboard and would like to be able to have shapes I have created be clickable with a dynamic link to a document on our network. Something along the hyperlink() function.
In a cell, the function looks like this: =HYPERLINK(Worksheet!I34,Worksheet!F34).
The data in I34 changes, depending on the input from a drop down using a vlookup command. Is it possible to create a macro and assign it to a shape to make the shape a clickable link?
View 1 Replies
View Related
May 27, 2007
I have an office map with a somewhat large number of hostnames similar to the structure shown below. I would like to have a macro scan through the hostnames (they all start with "BIGENTERPRS") and change them into a clickable hyperlink that points to "\hostnamec$". So for example, one hostname is "BIGENTERPRS0001". I want the macro to hyperlink that name to the address \BIGENTERPRS0001C$
View 2 Replies
View Related
Jul 2, 2009
I have this code that looks through my worksheet once the conditions are met it will email, and in column "M" I put a hyperlink to where the document is stored. All works as far as the email format, even grabs the hyperlink but it’s not clickable in the email.
Here is the code.
I am outlook 07 and vista 07.
Option Explicit
Const Startingrow = 11 'Data starts on row ##
Const AlarmDelay = 183 'send warning
Sub CheckTimeLeftFac()
'References needed :
'Microsoft Outlook Object Library
Dim i As Long
Dim j As Long
Dim msg As Long
Dim Lastrow As Long
Dim WhoTo As String
Dim SubjectLine As String
Dim MessageBody As String
Dim olMail As Outlook.MailItem
Dim olApp As Outlook.Application
Dim strLink As String
View 10 Replies
View Related
Jul 10, 2014
I have a macro that would create a hyperlink for every one of the files in a folder that a specific cell gave the url address for.
Recently I got moved to a new pc and forgot to migrate my macro's over. In combing back through previous threads... I found the macro, but now it won't work.
[Code] ......
The error that I get is:
Compile error:
Invalid use of property
I get this error at row
Range (Cells(Rows.count, "U").End(xlUp).Offset(1, 0).Address)
Why did the macro used to work and not anymore?
View 6 Replies
View Related
Apr 4, 2014
I want the macro to:
1. Create a new worksheet when data is entered into a cell (ie. entered text "ACC2013" into cell A5)
2. Rename that worksheet to correspond to the data in the cell (ie. change worksheet name from sheet2 to "ACC2013")
3. Create a hyperlink between cell A5 and sheet2
I'd like for this macro to loop through a range of cells so I don't have to have a long code. Let's say my data range is from A5:A23. If this requires multiple macros that is fine.
View 1 Replies
View Related
Apr 11, 2008
Is it posible that when data or text is entered into a cell and the enter key is pushed that this can either run a macro or activate a hyperlink to go to another worksheet for user to follow further instructions?
OR instead of going to another worksheet a pop up message appears with instructions and then can be OK'd to remove message and proceed?
View 9 Replies
View Related
Aug 7, 2008
how to open a Hyperlink directly. I have writen some code which allows me to copy over certain cells from a large list of hyperlinked files. However I am struggling to figure out how to open the hyperlink without actually writing the hyperlink address into the code. The hyperlinks are the file names and not the file paths. In essence I'm aiming to just get the macro to "click" the hyperlink to open it. Once the file is open the rest of my code will work, it is just this one sticking point.
View 2 Replies
View Related
Feb 8, 2007
I wanted to have the weeks of the month down one column = 52 week.
down the next column I have different amounts of money in that week.
some months have 4 weeks and other have 5. I wanted a program to say:
If you see a month "x" look at the next column and take that amount. Then on the next row you have month "x" again (week 2) go to the next column and take that amount and add it to week one. And so on until all 4/5 week are added to give on result.
Then the same for the next month...
month amount/week amount/month
05-Mar 0
12-Mar 70
19-Mar 210
26-Mar 350 1050
02-Apr 420
09-Apr 455......
View 9 Replies
View Related
Mar 16, 2009
I am hoping someone with excel experience can be of help to me with an unusual request for excel.
Assume cell A1 = 2, B1 = 3 and i wish the sum of this (5) to appear in cell C1. Very straight forward so far, however i wish the result to appear in C1 when i left click on a cell other than C1, say for example D7.
I can't use any macros for this.
View 11 Replies
View Related
Jun 11, 2009
I need to C8 - C19 only to add up jobs won by andrew (in current orders). It needs to be month specific. what i mean by that is I need the formula to do what its doing now (adding up the jobs by and putting the totals into the according cell depending on what month they were won.
View 2 Replies
View Related
Jun 14, 2009
I've got a column of numbers that represent the number of overs bowled in games of cricket. Whilst these are whole numbers (eg. 34 overs + 34 overs) the addition isn't a problem, but when they are incomplete overs (eg. 34.4 overs + 34.5 overs) then the addition if out of kilter as it sums them in base 10, and not in base 6. (As there are six balls in an over, not ten for anyone who doesn't know!)
View 2 Replies
View Related
Dec 28, 2009
I have multiple ranges in a spread sheet. I am trying to write a formula that will go out to each range in succession and look for a part number, upon finding return a quantity and them move on to the next range duplicating the above process. The formula should tally the grand total of all numbers found. I have it working except that not all of my items are in all ranges. If the item that I am searching for is in all ranges my formula works but if there is one or more of the ranges that doesn't have that particular value it returns an #n/a instead of totalling those that do have it. If I use a true instead of false in my [range_lookup] I get an incorrect answer. My formula for a given cell is listed below. This is with the true argument which does not work....
View 9 Replies
View Related
Aug 13, 2008
I am a new excel user. I a trying to write a certain formula but am having trouble. I want to write the formula to add a column of numbers, say H-10 through H-15. Each cell will have a number in it, but I want only to add the cells if the cell precedding it in the G-10 through G-15 Collumn is blank. For example if cells G-12 and G-14 have an "X" in them, then I do not want Cells H-12 and H-14 to be added. I only want the formula to add cells H-10,H-11,H-13, and H-15. I used just 6 cells for example, the column of cells to be added will be a lot longer.
View 3 Replies
View Related
Jun 12, 2014
I would like to write a macro that would insert a hyperlink to another file an would prompt the user to select the location of the file once the macro was run. I am not sure how I would get my macro to prompt the user to define the location (which is located on a network drive).
View 7 Replies
View Related
