I have a worksheets ( named TRACES) that contains 96 scatter charts in (4 groups of 24)and 8 line charts (1 group of 5 and 1 group of 3).
I would like to create some VBA code to loop through the different groups, the graphs in each group needing the same formatting.
how to do the looping for each group with or without hardcoding in each of their chart names.
I have created an excel file that contains a lot of worksheets which contain a lot of raw data and charts. There are 5 different tabs for 5 different companies. Each tab currently contains only 1 year of raw data for that company. Then I have another excel worksheet that has nothing but charts on it. Each chart is a bar chart that shows each of the 5 companies. It also shows the current rate for the month for each company and the 12 month average for each company. On the chart there are also 3 lines. There is a standard line that we try to meet each month. There is also a line for the upper control limit and a line for the lower control limit. Here is my problem:
The 2 bar charts (current rate for the month & the 12 month average) are created and updated by the raw data in each of the 5 data sheets.
Based upon the values in each of the cells that create and update the bars on the charts themselves:
I want the bars to be RED if the values are below the lower control limit.
And I want the bars to be GOLD if the values are above the upper control limit.
And I want the bars to be green if the values are in between the upper and lower control limits.
I have a worksheets (named Graphs) that contains 12 pie charts, 8 column charts and 4 line charts. I would like to create some VBA code to loop through all these 24 embedded charts and modify only the pie charts. I'm OK with the code to do the modification (which is to set their plot area size and also to delete the title), however, I have no idea how to do the initial loop to select only the pie charts. I'm sure there's a much better way then hardcoding in each of their chart names.
View 2 Replies View RelatedI'm new to using Macros and vba code in Excel and am getting problems in creating dynamic charts. Although I had seen all the posts of condional charts in search forum but no use.
I have an excel sheet with Date Received Column,Volume Unprocessed and the third column is to add 5 working days in the date received.I have to ask three questions.Please find enclosed the attachment.
1)In the attachement ,the excelsheet has 4 rows and chart for these values is displayed in chart1. But when new values are added up,it doesn't show those values in the chart automatically and I think I need macro for this.
2) I want macro to automatically calculate date by adding 5 working days in the date received for the rest of the rows.
3) If the current date is equal to date in the third column then the bar should be in orange colour. If the current date is greater than the date in 3rd column then the bar should be green colour and if its less then bar should be red.
I want to apply conditional formatting by VBA. Cell Q2 contains the month number, (in this case 11). I want each cell in the range D2:D50 to be filled in red and the word 'UNPAID' appear if Q2 is greater than 10 and the cell is blank, otherwise no formatting at all. I'd like this to be triggered on the Worksheet_SelectionChange event if at all possible.
View 4 Replies View RelatedI am trying to create a macro (which will go in an add-in, using Excel 2007) which will apply a custom format to any selected cells which have their formulae hidden (Format Cells, Protection, Hidden). A similar macro works fine for locked cells.
Here is the UDF I wrote, which returns True/False based on the Hidden status of a cell:
VB:
Public Function Hidden(Check_Cell As Range)
Hidden = Check_Cell.FormulaHidden = True
End Function
[Code]....
just place all three pieces of code into a module, and change the first line of the two macros to a standard "Sub Macro1()" type format.
I have this macro and all I want to do is apply it to every page of my worksheet with a loop and can't find what kind of loop I need:
Sub format()
' Keyboard Shortcut: Ctrl+r
'
ActiveCell. Offset(-37, 0).Rows("1:1").EntireRow.Select
Selection.Copy
ActiveCell.Offset(37, 0).Rows("1:1").EntireRow.Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.Range("A1:K37").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With
I have a workbook that contains 168 sheets of data (it's an extract from a PM tool) which is effectively a status report from each project in our portfolio. Contained within each status report are some financial data that shows a Plan number and a Forecast number for which I want to apply conditional formatting to this section (this is the same section for each sheet), to all the 168 sheets without having to go individually into each sheet. I have searched here and all the varying responses to a similar situation as mine, do not cater for the number of sheets that I have. And I need to do this on a monthly basis at monthend. So in the example below I want to apply conditional formatting if the Forecast (Cols D & G) are greater than Plan (Cols B & E). Is there a way of doing this just with the conditional formatting or would it need a VBA script?
Col A Col B Col C Col D Col E Col F Col G
Financial Summary - Selected Project Currency: USD
Current year total cost
Overall project cost
[Code] .....
Column A has 200 names.
I want the names John, Tom, George, Frank and BillyBob to be filled with blue.
I want the names Sally, Mary, Kathy and Gertrude to be filled with pink.
I want the names Ebenezer, Vader and Fagin to be filled with black...and so on.
I wish to have one conditional format apply to K and L. Presently it's L only where it works.
=OR(K1="",AND(K1="No",L1<>""),AND(K1="OJ",L1=""))
Why when I change the range from =$L:$L to =$K:$L does it not apply to both?
is possible to construct a conditional formatting scenario and at the same time apply that formatting if the cell entry is within 10% either way of the logical test?
For example if you apply conditional formatting if the cell value is between 300-500 is it possible to add in a 10% swing on each value?
I have a conditional formatting issue, using VBA.
My conditional formatting code works fine for one column; however, when I try to apply the conditional formatting to two columns, the code only applies to the first column listed. Additionally, I have two sets of "rules" that apply to the same column. One of the "rules" includes two columns. The other rule applies to only one column. I'm not sure if this is my issue, or whether I'm trying to apply the same code to two different columns.
My code is below.
Code that applies to column "M" only...
I downloaded the checkbook register from Microsoft.com and am trying to add a
few cells at the end to quickly calculate my outstanding debits and credits
so that I can balance my statements automatically. I figured out how to write
the formula properly (eventually), but the cells will not take on the
currency format no matter what I do. I have tried pasting the format from the
other cells within the register, tried clearing the format and reapplying the
currency format, tried accounting, etc.
I'm trying to find a macro to apply conditional formatting to a large number of cells,
What I would like to do is when cell E96 has a value of a, cells E3:F95 are shaded in grey. Then when cell G96 has a value of a, cells G3:H96 are shaded in grey, and so on down to IU96 having a value of a and cells IU3:IV96 shaded in grey.
I have software that exports to an excel file. The files are one or two page reports. The way the software dumps the reports into excel, it comes out looking pretty rough. The rows and columns aren't spaced very well, the fonts look like garbage, and nobody likes them.
I would like to apply formatting changes to these reports automatically without the end user having to do anything. So as soon as the document is opened up it bolds the column headers, adjusts column widths etc. The reports are auto generated so no formatting can be done when the reports are made.
There may also be different formatting done to different reports. The files will come out named something like, "Report_A_DDMMYYY.xls, Report_B_DDMMYYY.xls," etc. Report A, and Report B will likely need different formatting.
I'm not opposed to using VBA or whatever might be necessary to make this happen. I can learn anything I need to pretty quickly, I just don't know where to start with this.
Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...
View 1 Replies View RelatedI have a table. I want to apply conditional formatting to the entire table so that wherever a cell contains a dropdown list (validation list) the cell is formatted with a different colour.
View 3 Replies View RelatedI'm trying to apply conditional formatting (shading) to cells that are left blank.
(Purpose: I am designing a research template for a client to complete with data and want the spreadsheet to show them where they've "missed a bit"!)
(When I go to the conditional formatting box, it asks me to specify when "cell value is"..."between/not between/equal to/not equal to" etc. But there's no option to specify when the cell is blank.)
Is there a way to apply conditional formatting to a range of cells that contains formulas?
View 6 Replies View RelatedI have a spreadsheet and I want to color particular cells in a column with a new color - i.e. any new changes need to be highlighted. I know there's a way to do tracking changes in excel, but it just sticks a little flag almost invisibly in the corner of the cell. I want to be able to bring the spreadsheet back to our administrator and say hey the stuff in red is new.
On a related note - I am working on this massive spreadsheet that is a .csv but I am saving it as an exel spreadsheet - is that ok? I am assuming that if I save it as a csv, it will return to the original formatting just without the colors, filters, etc changes I made - which is fine because I think somehow the .csv file will be uploaded to the system and no further changes need to be made.
I found out the hard way when you have a .csv file and make changes and then save it, you lose all the fun row/column size adjustments, color, etc - but I figure in the meantime I'll work on it as a excel spreadsheet and then return it to it's natural .csv file status.
I'm looking to see if there is a way to take the decimal place formatting of cell and apply it to other cells.
For example, if someone types in 0.0001 into a source cell, I'd like to take that decimal formatting and apply it to other destination cells. This way when values are typed into those cells it will automatically display 4 places past the decimal, no matter what the value. ie 50 will display 50.0000
I am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?
Image attached : Capture.JPG
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
Is there any way to create a default template that will apply all the same formatting, print options, etc to every new workbook that I create. I guess what I am asking is a way to change the excel defaults for text type, border size/color, etc.
View 4 Replies View RelatedI am trying to find a way to write a code in VBA to conditional format Bars on a pivot chart to change colors based on if the field beats the forecast field.
I am attaching the sheet which explains it better.
I would like the bar series in the chart to show green if it beat forecast and red if it didn't.
I want the macro to do this for all the pivot charts.
I have three items I would like to graph, on one chart. The first is %Complete. This is a number figure. The next is the date the item is due to ship. Obv, this is a Date. The third is today's date. Basically, I would like to display in the same chart so that we can see how far a long a project is, in relation with today's date and how much longer we have until it needs to ship.
This is the current display of the chart:
Is there a way to show the ship date, as the 100% complete mark? In order to make it display half-way decent, I had to format the left y-axis to go above 100%. I first tried to format the right y-axis, but was extremely confused to setting values. I figured out that the end date is somewhere in the 40,000 value mark? WTF is this about? Is 1 equal to 24 hours? I assumed that was the case, but then when I pick the value it should end with, it doesn't seem to react that way. I want the right axis to start with 12/01/2011 and end with 5/01/2012. How can I achieve this?
I normally create charts and use the same formatting for my colours i.e. Gradient fill with Shadow etc...
Now each time i create my charts i am having to keep do the formatting again and again and if i create a new spreadsheet with charts i have to do it all over again
Is there any way i can save this formatting colour so i can quickly apply to my chart series etc?
I m unable to apply conditional formatting with numbers ( font and fill of same color).
like:-
if press 1 , cell and font should be of same color and if 2 with different color and so on
as of now either formula is applying on cell or font but not on both
I am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.
I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.
I am using Excel 2010 and Vista.
I am gaining an error in my code due to the sheet being protected.
I cannot seem to get the correct code to allow for the code to still run, while the sheet is protected.
[Code] .....
I tried protecting the sheet via:
[Code] ....
But I still get an error.