Aptitude Knowledge Test

Jan 6, 2007

Any Excel File or program that I can have prospective employees run to determine their level of excel knowledge

View 6 Replies


ADVERTISEMENT

Using Boolean To Compile Knowledge...

May 29, 2009

I have minimal excel knowledge, but enough to get by. I have 2 years in C++ programming.

Here's what I'm trying to do:

I'm trying to create a workbook to keep track of flags we send out, and receive back. We have a lot going and coming, so I figured the best way to do this would be to break down each region on different sheets. But I need to create a check box that says something like, "Yes/No" or "Here/Gone" or something like that. THEN, I need to take that information, and put it on the front sheet of the workbook so I know how many we have in/out total. Does this make sense? I know how I would program this in C++, but excel is a bit different.

View 14 Replies View Related

Test Two Cells And Set A Third Cell With Different Values Depending On Test Results

Aug 21, 2013

I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.

A1 represent a number of years and B1 represent gains or losses (negative)in dolars.

The way I see the logic is as follows:

If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)

If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.

On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.

I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:

If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL

View 3 Replies View Related

Test For Next Available Row

Feb 10, 2007

I am trying to test for the next available row in a sheet using a range as follows:

NextRow = Range(MyRange).End(xlDown).Row + 1

If there are no rows being populated, the formula throws an error and I assign NextRow to 0 indicating no entries present

However, and this is my question, if there is one row populated the value for next row seems to either give 0 or 65637.

After this, the code runs OK.

View 9 Replies View Related

Test If A Cell Has #N/A

Nov 9, 2009

How do I test if a cell has #N/A?

View 4 Replies View Related

How To Test A Formula To See If Particular Value Is Used Or Not

Jun 27, 2013

From a large worksheet I'm trying to find out if a particular value is used in that formula. E.g. formula: (In cell C1)=A1+B1*.75

I want to check if .75 is used in the formula (which is 75%) There are 1000's of record would it be possible to check the entire column C

View 6 Replies View Related

How To Test If Value Is Integer

Apr 9, 2004

I am using the IsDate() and IsNumeric functions in my VBA code. Is there an equivalent function for testing if a value is an integer?

View 5 Replies View Related

Formula To Test A Value

May 11, 2007

I'm having an intelligence lapse and I need help with a formula

Simply need to return a "1" if value in Cell X is equal to or greater than -(minus)4% and a "0" if value is less than -(minus)4%.

View 9 Replies View Related

Timing A Test

Jul 16, 2008

I have a 32 question test that I expect everyone to get most (if not all the answers correct. I have a cell that is counting the number of correct answers.

What I want to do is start a timer when the first correct answer is put in and stop when the last answer is put in. So essentially, I need a way of looking at a cell and starting a timer when it equals one and stopping when it hits 32.

View 9 Replies View Related

Test To See If The Autofilter

Mar 19, 2009

How i can test to see if the autofilter, while enabled, is not currently filtering?

View 9 Replies View Related

Cochran's Test

Jan 23, 2007

how to perform Cochran's Test in Excel?

I know it's probably available somewhere as an add-in, but we aren't allowed to install any, so we have to do it from scratch.

Basically, I'm have to set up a spreadsheet to look at "Between Laboratory Outlier Tests", and Cochran's test is one of them.

Also, how would I calculate the Cochran Critical Values for a given set of laboratories and replicates?

View 3 Replies View Related

Test If Array

Apr 25, 2007

I am currently working on code that uses either arrays or ranges. I often resize local array based on the dimensions of the input. However, I am running into trouble because arrays use ubound for dimensions, but ranges use ether rows.count/columns.count or ubound on value2. How can I determine whether a variable is an array or a range. the IsArray function happily passes a range variable, so that doesn't work.

View 2 Replies View Related

Test For Date

Jul 25, 2007

I have a defined range Picku_time and this function fails
=isdate(range("Pickup_time"))
it gives the =#Name?

View 3 Replies View Related

Test 2 Cells Before Using SUM

Nov 28, 2007

I am using the formula below to return a blank cell if either logical test returns true but apparently the OR operator returns a #VALUE error when applied to a non numeric value in a cell - in this case cell E40. =IF(OR(E40="N",P40=""),"", SUM(P40,S40,V40,Y40,AB40,AE4))+F40. My goal is to return a blank cell if E40 contains the letter N or P40 is blank, otherwise perform SUM(P40,S40,V40,Y40,AB40,AE4))+F40.

View 4 Replies View Related

Function To Test For Whole Numbers

Jan 22, 2009

I have a resolution calculator that I am working on.

You put your original resolution in say 1440x1080

then below you put in any one of the new target resolutions.

Place 720 in the height and you get a message that says

"960 is your new matching Width resolution"

Id like to follow up on that with an if statment that test to see if the cell is blank if it is then null, if not then test 960 in this case to see if 960/16 = a non decimal number.

So in the cell to the right of that sentence it would return the result
"and 960 is 16 pixel safe" something like that.

I can probably figure out how I will handled the cell arrangement, numbers, and text I just for now need to find a way to do a test on whole numbers and return a text value (my guess is an if statement)

View 6 Replies View Related

Under What Conditions Does A Logical Test

Feb 7, 2010

Under what conditions does a simple logical test, like

View 5 Replies View Related

Copy Test From Cells Into Row

Jul 9, 2014

I am trying to find a script where I can see information more clearly. I am trying to copy certain cells and have them into a single row. For example, everytime the word USER comes up, I want that in a single row and all the information that comes after it and below to be in the same row. So I would want all this information in a single row. And it would start a new row when the word USER comes up. I will attach an excel table for an example. Working progess.xlsm

1READY
LU*
USER=irrcertaNAME=CERTAUTHAnchorOWNER=irrcertaCREATED=01.097
DEFAULT-GROUP=PASSDATE=00.000PASS-INTERVAL=N/APHRASEDATE=N/A
ATTRIBUTES=REVOKED
REVOKEDATE=NONERESUMEDATE=NONE
LAST-ACCESS=UNKNOWN
CLASSAUTHORIZATIONS=NONE
NO-INSTALLATION-DATA

[Code]...

View 1 Replies View Related

Test If File Is Open

Jan 20, 2009

How can I open Book2.xls (in the same folder) in 'read only' mode, using a macro from Book1.xls? Book2 might already be open or it may not. I then need to return control to Book1.

View 13 Replies View Related

Test To See If A Character Is A Number

Feb 6, 2009

I have a number of entries in column A.
The format is:

A1 B680192 Middle School
A2 Office Building Project

and so on;

I want to test if char.s 2 through 7 are numbers.

I can seperate one char at a time and use CODE function to check if the result is between 48 and 57.

I know how to split all six char.s at a time e.g. 680192, but I don't know how to test to see if it is a number?

ISNUMBER function doesn't work.

If I can do it with excel function, it would be better. If VBA has to be used, so be it.

View 11 Replies View Related

Test If Workbook Open

Apr 13, 2009

How do I test to see if a workbook of a given name is open in my Windows session?

View 4 Replies View Related

Test For Optional Range

Aug 25, 2009

I need to test whether an optional Range has been passed to a UDF. IsMissing(RangeName) always returns False regardless of a range being given or not. RangeName exists as an Object that shows a Value of Nothing and Type of Range. I have not found any test that will indicate if the Range was passed in or not.

View 4 Replies View Related

Test If List Exists

Nov 16, 2009

is there a way to test if a list exists on a sheet? I'd like to do something like this:

View 2 Replies View Related

Test If Workbook Is Open

Jan 29, 2010

I am using the following code to test if a workbook is open. I tried (1) with entire path name and (2) with the name of file only. Code works if I am using the file name only. I am just wondering why it would not work with the path name? Doesn't the code need to know where the file is located or does it just search all folders and drives?

View 4 Replies View Related

Trying To Imitate AVERAGEIF() With An OR() Test.

Dec 17, 2008

I've got a spreadsheet I use to track quality scores, it will appear like such, and with 2003 I don't have AVERAGEIF()

name | team | score
joe f | billing | 3
may r | billing | 3
roy m | status | 1
kay t | first call | 1
etc...

I already used an array function to find the average of each team (even with empty scores) by using:

=AVERAGE(IF(DeptRange=$B$7,C$20:C$200)) [Ctrl-Shift-Enter]

EDIT: Incidentally, I changed AVERAGE() to COUNT(), and it kicked back 9 values instead of 3 (I have one value entered for each team atm). B7 is the name of the department I'm finding the average for. I've got 3 departments in one location, and 6 in another location. I'm trying to add OR() to give me our regional quality averages, and it's not working. I used:

=AVERAGE(IF(OR(DeptRange=$B$7,DeptRange=$B$9,DeptRange=$B11),C$20:C$200)) [Ctrl-Shift-Enter]

View 2 Replies View Related

Vlookup Test Against 2 Columns

May 21, 2009

=IF(ISERROR(VLOOKUP(70036,PositionDataBuy!$D$2:$U$505,17,FALSE)),"Not Found", VLOOKUP(70036,PositionDataBuy!$D$2:$U$505,17,FALSE))

To remove the error if Vlookup can't find a match - the formula above uses the ISERROR.
If vlookup produces an error (can't find a match) the Excel cell returns "Not Found", otherwise, it returns a valid Amount from column 17.

This formula is inserted into an Excel specific location using Access VBA based on a set returned from a SQL Server Query.

An Excel Worksheet PositionDataBuy is created in sort order of Contract numbers.

The problem came a few days later when a condition of 3 of the same Contract numbers for the same day had different buy Amounts.

So the Vlookup found the first contract number (e.g. 70036) and the value associate with the first instance in PositionDataBuy three times)

The challange is now to use Vlookup for the contract number, then (if it matches) look over at the Amounts column and determines that from each contract record (assuming a duplicate)
it also matches the volume.

So, if Vlookup's error message is False (found first value), another nested if (with the ISERROR) will check the second required column.

But, what if the valid column is on the second record with 70036? I suspect if an error was generated the Vlookup is done and it won't continue.

The data below is fudged, lets assume that no two volumes would be the same for now.

Example: 70036 also needs to be tested against volume and then return the Amount
Contract Volume Amount
70035 5 100
70036 7 120
70036 3 33
70036 6 22
70037 1 11

View 13 Replies View Related

VBA UDF - Test If Cell Is Colored

Oct 10, 2012

I need a UDF to test a single cell if it is colored. If it is the result returned should be a 1, if not the result will be blank. This is what I have so far, but I don't know much about VBA.

Function Filled(MyCell As Range)
If MyCell.Interior.ColorIndex > 0 Then
Result = 1
Else: MyCell = ""
End If
End Function

View 3 Replies View Related

Using Vlookup As The Logical Test

Sep 16, 2008

Here is the formula I am trying to write:

=IF(A21=(VLOOKUP(XX52,AN24:AN52,0,V38),V45,0)

The above is in cell X45

This does not work, but this is what I want it to do:

I have a list of text, if cell A21 equals a range in that text then I want the cell to return whatever is in Cell V45, if A21 does not equal within the range of text, then I want it to return a zero in cell X45.

You can see that I tried using Vlookup as the logical test, but I am not doing something right or vlookup cant be used that way.

View 9 Replies View Related

Button To Form Test Box

Sep 23, 2008

how I can connect a button to a form text box for the purpose of making a simple user friendly search box that will work when the sheet is protected.

So someone enters their criteria into the text box (and it is a text box from the form toolbar - not the drawing toobar) and then hits the button "QUICK SEARCH" and it does what the CTRL+F function does in excel.

View 9 Replies View Related

Test For InputBox 'Cancel'

Jan 19, 2003

After an InputBox statement, how do I test to see if user pressed "Cancel" and if so, exit the Sub?

View 9 Replies View Related

If Formula To Test For 3 Values

Jan 25, 2007

I am creating a spreadsheet to monitor horse race betting but my formulas aren't coming out right.

The problem is to do with adding winnings to a running balance or minusing each bet's stake money from the running balance if the bet loses.

I have two formulas that are giving me a problem, both are in the P column in the attached spreadsheet. The first one, located in row 2, being slightly different as it is the first data row and so contains the starting balance in the formula.


=IF(OR(J2="W",J2="P",300+S2),IF(J2="L",300-O2,"")).
This produces a blank or error result.

=IF(OR(J3="W",J3="P",P2+S3),IF(J3="L",P2-O3,""))
This produces an error whatever is in the J column

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved