Using Vlookup As The Logical Test
Sep 16, 2008
Here is the formula I am trying to write:
=IF(A21=(VLOOKUP(XX52,AN24:AN52,0,V38),V45,0)
The above is in cell X45
This does not work, but this is what I want it to do:
I have a list of text, if cell A21 equals a range in that text then I want the cell to return whatever is in Cell V45, if A21 does not equal within the range of text, then I want it to return a zero in cell X45.
You can see that I tried using Vlookup as the logical test, but I am not doing something right or vlookup cant be used that way.
View 9 Replies
ADVERTISEMENT
Apr 8, 2009
I am trying to create a logical test with three possible results:
h2 <10.2 "needs improvement"
(if false) h2=10.2 "meets standard"
if false h2>10.2 "exceeds standard"
Basically, I am referring to a cell to determine if it meets, exceeds or does not meed a specific standard. In this case 10.2.
View 4 Replies
View Related
Feb 7, 2010
Under what conditions does a simple logical test, like
View 5 Replies
View Related
Feb 17, 2012
I am trying to build a logical formula and it turns wrong values. I have four criteria in numbers, the codes are: 1 invoices, 3 credits, 7 Debits, 8 Returns, 9 Payments. All of these codes have positive numbers. I am trying to convert "credits", "returns", "payments" in negative . the rest "invoices" "debits" stay positive. In column A i have dollar values all positive, column B "codes" mentioned above, column C "i want to put the correct values.
View 9 Replies
View Related
Oct 8, 2012
I have a spreadsheet where I have a list of patients who were evaluated on a certain date unique to that patient. Some of the patients have a subsequent date of death, and some do not (they're still alive).
I need to create a logical test which indicates whether or not the patient died at specific intervals after their unique evaluation date-- at 3 months, 6 months, and 12 months. Additionally, I need to measure whether the patient died at 0-6 months, or 0-12 months, or is still alive.
In other words, if Patient A was evaluated on 1/1/2008 and subsequently died on 10/31/2008, I need to do a logical test that says 3 months = false (no death), 6 months = false (no death) and 12 months = true (death). True = 1 and False = 0 (so I can do a simple column add to figure out how many died at each interval). Additionally, for the 0-6 month test it should calculate = 0, but for the 0 - 12 month test it should calculate = 1.
I'm totally stumped as to how to do this. Currently my spreadsheet reads as follows: (I've put ** next to cells that I need formulas to calculate. If no **, assume it's a value I've inputted manually)
A1 = Patient number (numerical order)
B1 = Patient Initials
C1 = Initial Evaluation date
D1 = Date of death (if any- blank if patient is still alive)
E1 = Patient death indicator (1 = dead, 0 = alive)
F1** = Indicate whether or not patient died within 3 months of evaluation (1 = dead, 0 = alive)
G1** = Actual date of death within 3 month interval
H1** = Indicate whether or not patient died within 6 months of evaluation (1 = dead, 0 = alive)
I1** = Actual date of death within 6 month interval
J1** = Indicate whether or not patient died within 12 months of evaluation(1 = dead, 0 = alive)
K1** = Actual date of death within 12 month interval
L1** = Did patient die within 0-6 months of evaluation? (1 = dead, 0 = alive)
M1** = Actual date of death within 0-6 months
N1** = Did patient die within 0-12 months of evaluation? (1 = dead, 0 = alive)
O1** = Actual date of death within 0-12 months
View 7 Replies
View Related
May 17, 2007
I have data in column A. The data contains a name, an underscore and initial/s. For example: rebecca_rt, john_j, etc... I'm trying to pull only the characters to the right of the underscore. I played around with the below formula that I found under a similar question thread. But, it doesn't quite work. As it is now, it returns ecca_rt when I just want rt. I'm sure this is probably really close =IF(ISERROR( FIND("_",A1)),A1,RIGHT(A1,FIND("_",A1)-1))
View 3 Replies
View Related
Jun 18, 2014
My logical test is =IF("D2"="E2",1,2). When I autofill or copy down, the row numbers do not change to "D3"="E3", etc. How do I delineate text and also have the ability for autofill or copy to change the rows as it goes?
View 2 Replies
View Related
Aug 22, 2014
Basically I have a column (lets call it column A) whereby I manually fill the cells green once I have received some documents, another column which has a numeric value in it (column B) and I want to create a third column which basically just copies column B but ONLY if column A is filled with a colour (actual colour doesn't matter cause I only use green)
I tried using the IF function but I don't know how to use cell colour as the logical test
View 3 Replies
View Related
Feb 19, 2014
I'm trying to create a formula that will determine the bonus (%) for sales made. Here's the table:
<10000 sales = 0% bonus
>=10000 sales but <=29999 sales = 5% bonus
>=30000 sales but <=to 44999 = 7% bonus
>50000 sales = 10% bonus
Since the sales and bonus figures are subject to change each year I'd like the formula to point to the numbers but that part seems easy if I can get the formula right.
View 3 Replies
View Related
Nov 9, 2009
I'm trying to use the following formula to verify if the "," is within a cell. Something is not right, because even for True conditions, I'm getting a False return. I think my True logical test is not written right.
View 3 Replies
View Related
Nov 15, 2013
I need a formula that will return a range of values from a list.
Example: I need a formula in cell A2 that looks at the list and will return all numbers that are >99 but 199 but299 but
View 6 Replies
View Related
Feb 28, 2013
excel 2007. Here is the situation:
I am using the Index and Match function to lookup for two specific criterias in a different worksheet. So far, it is working well, but it gets complicated. I want to look for the criterias in 6 different worksheets based on what a certain column is saying. Here is an example:
A
B
C
D
[Code].....
So, if the continent is Asia in the column A, I want Excel to look in the Asia worksheet for the city and the venue and return me the contact information. Same, if the continent says Europe, I want it to look in the Europe worksheet or the city and the venue and return me the contact information. So on and so forth.
The formula I have at the moment is this:
{=INDEX('Asia'!$1:$1048576;MATCH(B3&C3;'Asia'!D:D&'Asia'!E:E;0);9)}
How do I incorporate the logical test for it to look for the proper worksheet knowing that all my continent worksheet have the same structure?
View 3 Replies
View Related
May 21, 2009
=IF(ISERROR(VLOOKUP(70036,PositionDataBuy!$D$2:$U$505,17,FALSE)),"Not Found", VLOOKUP(70036,PositionDataBuy!$D$2:$U$505,17,FALSE))
To remove the error if Vlookup can't find a match - the formula above uses the ISERROR.
If vlookup produces an error (can't find a match) the Excel cell returns "Not Found", otherwise, it returns a valid Amount from column 17.
This formula is inserted into an Excel specific location using Access VBA based on a set returned from a SQL Server Query.
An Excel Worksheet PositionDataBuy is created in sort order of Contract numbers.
The problem came a few days later when a condition of 3 of the same Contract numbers for the same day had different buy Amounts.
So the Vlookup found the first contract number (e.g. 70036) and the value associate with the first instance in PositionDataBuy three times)
The challange is now to use Vlookup for the contract number, then (if it matches) look over at the Amounts column and determines that from each contract record (assuming a duplicate)
it also matches the volume.
So, if Vlookup's error message is False (found first value), another nested if (with the ISERROR) will check the second required column.
But, what if the valid column is on the second record with 70036? I suspect if an error was generated the Vlookup is done and it won't continue.
The data below is fudged, lets assume that no two volumes would be the same for now.
Example: 70036 also needs to be tested against volume and then return the Amount
Contract Volume Amount
70035 5 100
70036 7 120
70036 3 33
70036 6 22
70037 1 11
View 13 Replies
View Related
Aug 21, 2013
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
View 3 Replies
View Related
Feb 20, 2009
I am trying to use an OR in a VBA IF statement. The condtition finds one vale but not the other. Due to the nature of the data, a value is marked either on, off, or both.
I have two seaches in the macro: one looks for on and both, and runs a sub, the other looks for off and both and runs a different sub. However I can't get the both case to run as it should.
If (Cells(i, CurCol).Value = "On") Or (Cells(i, CurCol).Value = "Both") Then
Cells(i, CurCol).Select
View 9 Replies
View Related
Oct 19, 2007
I have a spreadsheet wherein I've got a list of names, some of which say (See XXX) where XXX is a number. I've extracted the number to column 2. In column 3 I have another reference number. I essentially want to use column 3's numbers only if there is no value in column 2 (i.e. where there's no "See XXX in the list of names). When there is no value in column 2 I have #VALUE! - but I can't seem to use it in a logical statement. How can I do so? Or is there an easier way to pick between 2 cells?
View 4 Replies
View Related
Jun 17, 2008
i have problem with a long code.
So I divided that code in 4 parts.
So I have
module1 -> Sub Macro1()
module2 -> Sub Macro2()
module3 -> Sub Macro3()
module4 -> Sub Macro4()
I have declared
Option Explicit
Dim mdNextTime1 As Double
Dim myEnter As Integer
'Dim myK1 As Integer
'Dim myK2 As Integer
'Dim myK3 As Integer
Dim myK4 As Integer
Const myC As Integer = 82
Dim Lastrow As Integer
Dim myActualRow As Integer
all my sub have the following structure:
View 9 Replies
View Related
Mar 7, 2009
I'm trying to meet set criteria in b5 using AND the first works if both conditions are met in two cells but bur won't on one cell?
Private Sub PTIColours_Click()
If Range("b5") > 0 And Range("c5") < 0.149 Then
Range("a5").Interior.ColorIndex = 54
End If
End Sub
But this dosen't
Private Sub PTIColours_Click()
If Range("b5") > 0 And Range("b5") < 0.149 Then
Range("a5").Interior.ColorIndex = 54
End If
End Sub
I have tried searching for a good example of how to use logical operators on Mr Excel however the search is frustrated by "Small Words" in the search field ie IF, AND, NOT ,OR are too short to search.
View 9 Replies
View Related
Jun 16, 2006
why the following code within a macro does not work
Cells(x,11).Value = If(Or(Cells(x,136)="", Cells(x,134)="","",Cells(x,136)-Cells(x,134))
View 9 Replies
View Related
Jun 22, 2014
In column N I have a list of dates. In column Z I want to display either "Yes" where the date in column N has already passed or "No" if the date in column N has not passed. The formula I'm using in column Z is =IF(N2<TODAY(),"Y","N") however it just gives me "No" on every row regardless of whether date is passed or not.
View 11 Replies
View Related
Dec 16, 2008
I need a solution for this situtaion! Iam using a french version of excel2003!
I have #DIV/0! in P24 (i.e an error value) So I need to check in Q24 such that if (P24=#DIV/0!,0,P24). I need to have a logical formula for this one!
View 3 Replies
View Related
Oct 11, 2008
I am working on a homework assignment, the books method was crap so I did my own method. I am almost done except for 1 last thing. I cannot find any function that will allow for 3 logical tests. I have a screen shot here explaining what I need to happen.
View 2 Replies
View Related
Nov 4, 2008
I inserted the following logical tests for cells E5 and E6. I saved the workbook with SE(B) in cell G3.
View 3 Replies
View Related
Nov 28, 2008
i had a query regarding a report i have to provide daily. i want the result to be in the form of a number which i pick up from another file.
now there are three colums in this file. one shows the date (i.e. in the ddmmyyyy format, e.g. 5/11/2008). another shows a region (e.g. SOUTHD) and the third shows a number (e.g. 445) of which i have to count how many instances occur for a particular day.
Hence for any given cell in which i would place this formula, i would need the number of times the number 445 occurred from the third column provided the date from the date column was, say, 5th November 2008 and the region was showing as SOUTHD.
pretty sure the COUNTIF function can be used to make such a formula when combined with some logical functions but am unsure on how to do so.
View 11 Replies
View Related
Sep 14, 2009
How to find whether a particular cell is blank or is text in a given row/column?
To elaborate more, I have some data in a row:
A B C D E
15 N 16 17 18
I am using a below formula to find whether there is any text in the row
ISTEXT(row(A1:E1)) but I am getting result as False.
View 9 Replies
View Related
Dec 26, 2007
How we represent AND OR in a function how many logical sequence can 1 if take
example =if((w4>u4 and v4=0) or (t4>r4 and s4=0);"yes";"no") can excel(2003) accept this , or there is an error in it what is error?
View 4 Replies
View Related
Mar 30, 2014
View attached file. I have a complexity rating that I have developed for a set of projects that I am working on. Management of my company have signed off on this matrix as they believe it is most appropriate. In my projects pipeline tab, I have created the risk and complexity ratings using logical commands.
projects.xlsx
View 10 Replies
View Related
Feb 12, 2009
How do you do two "if" statements?
I need to have two tests before i get a final result so i need to know the protocal to get two if statements.
View 14 Replies
View Related
Sep 28, 2009
I am trying to get more than one outcome from a logical function in a single cell. I am teaching a class and i want this particular cell to add up all the points from tests and quizzes and then give me an outcome of a grade (A,B,C,D, or F) Right now i can only get the cell to give me an outcome of A or B. I need the cell to be able to give me 5 possible outcomes (A,B,C,D,F).
Right now i have this formula in this particular cell......=IF(Q6>234,"A")......so if Q6 is greater than 234pts they get an A...if not they get a B. How can i also give ranges of total points to have the cell give C,D, or F?
View 5 Replies
View Related
Mar 13, 2006
When using a IF formula, one answer is false.
Can the word FALSE be changed to a zero?
View 9 Replies
View Related
