I need a UDF to test a single cell if it is colored. If it is the result returned should be a 1, if not the result will be blank. This is what I have so far, but I don't know much about VBA.
Function Filled(MyCell As Range)
If MyCell.Interior.ColorIndex > 0 Then
Result = 1
Else: MyCell = ""
End If
End Function
How to make a macro that will:
Scan Sheet1, if colored cell is found, copy the Entire Row of the colored cell to sheet2.
I am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
I have large data sheets with blocks of blue-colored cells. I want to surround them with lavender-colored cells. Then I want to run a command to Clear Contents of all lavender-colored cells. Is this possible?
So first I have:
Black-text
blue-text
blue
blue
Black-text
blue-text
blue
blue
Black-text
Then I want:
Lavender
Blue
Blue
Blue
Lavender
Blue
Blue.................
I have a table with numbers, I want to create a result column according to colored scores. How can i do it with a macro?
See attachment for details : score.xls
Is it possible to get the value of the first non-color filled cell in a columnto be displayed in another worksheet/workbook.
For Example:
In the below table if the first three entries are filled with red color, then the date which i need to be displayed in the other sheet is 20.5.14.
17.5.14
18.5.14
19.5.14
20.5.14
21.5.14
I have big library books database file. now i want to re check all the book with physical stock and mark in excel file.
i have one more file with books barcode no.
now i want to mark multiple cell in sheet..
let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies View RelatedI am trying to figure out how would be the best way in VBA to identify if a cell is colored green (column C) then in column L I want to say "YES" else nothing.
I have came up with a count so I know how many records to look at but have nothing from there.
Public Sub KPI()
Dim cls As Object
Dim i As Integer
Dim rng As Range
Set rng = Range("C9:C100")
For Each cls In rng
If cls.Value "" Then
i = i + 1
End If
Next
End Sub
I have a question regarding the formatting of cell values. Is it possible to format particular value of each cell in to Bold and Colored?
For example in the below example for cells A1 to A5 contains some values.
I want the value BBBBB to be bold and with red color font.
Title
AAAAA BBBBB CCCCC
DDDDD BBBBB EEEEE
BBBBB GGGGG HHHHH
LLLLL AAAAA BBBBB
I have used a formated find (Ctrl+F) to color all cells that contain a certain word. I now want to copy and paste those rows (not just the cell) into a new worksheet within the same workbook. My data is in A8:F2411. The colored cell is in column B.
I have searched for previous topics on this and found the one I needed, however; it was not solved.
excel VBA to find the first colored cell in the column "A" and copy it to the Range (E1)
View 5 Replies View RelatedI'm new to 2010 and can't work out the new conditional formatting! I need to be able to enter a letter in A1 and have E1, F1 and G1 automatically show a different letter in each cell (different coloured fonts in each cell as well).
View 3 Replies View RelatedI have a range of cells (A1:A12) each with monthly sales figures.
I need to highlight where in the range the values exceed a certain amount ($50k for example). However it's only the first cell that hits the value that should be coloured, i.e. once it reaches the figure nothing afterwards is to be coloured. So it could occur in cell A3 nothing afterward should be coloured.
I've tried using conditional formatting but I can't get the cell to determine if any other cell is coloured.
How do I test if a cell has #N/A?
View 4 Replies View RelatedI need to take a specific action when a cell has an actual formula in it versus when it just has a "value". Is there a procedure or command which will allow me to identify if a certain cell has a "formula" (like =sum(a1: a5) ) or just a value.
View 3 Replies View RelatedHow would I write an IF Then Statement to test if a cell is blank? (meaning it could have "Div/0!", text, 0, or "n/a".)
View 4 Replies View RelatedI am trying to build a macro that test for the value of each cell of a range (in a column), and if found, then the value of the cell of the same row (another column) will be set to 1. If not, then the macro writes a formula to get some data from BBG (this part is ok). this is what I have done so far but I have an error message, telling me "Not Else with out if" .
Code:
Sub Fx()
With Worksheets("DivRelease")
Dim LastLig As Long
[Code].....
Is there formula to use if I want an IF statement to add a date "TODAY()" to a cell if a corresponding cell is highlighted? I would search for this in the archives if I had a clue what to search for. "Conditional formatting", maybe?
In Col J "Appt. Date", I want to add today's date if the cell in Col C of that row is green.
How would that work? My worksheet is posted below: ......
I find myself needing this often and hope there is an elegant formula that can make this easier.
Is there a formula that will test if a particular cell is referenced somewhere in another array or vector? Specifically, I find that I have to aggregate long lists into categories to fit budget formats of various lenders and investors. For example, my detail budget has separate rows for Water, Sewer, Garbage, Electrical, and Gas. These expenses have to be aggregated on one funder’s budgets as “Utilities.” Sometimes after going through this I find that my totals don’t add up, i.e. I left an item out of the aggregated budget. I would like to be able to add a column on the detail budget to test if each budget item has been referenced in the aggregated budget.
I want to add an IF statement to my macro that will run only if a cell on the worksheet is not blank (empty). I know how to use the if statements but can't figure out how to test a cell for contents.
View 4 Replies View RelatedI'm testing to see if a cell has nothing in it, and if that is true then it will execute the code. My problem is that even though the cell is blank the field does have a drop down list (list validation set for that field) below is the code i used, but doesn't work.
If Range("b3").Value = " " Then
I want to reference 2 cells to open a msgbox. Currently I use this formula in a cell "=IF(E4="C",IF(A4>30,"OT","")) I am trying to write a macro that will open a msgbox instead. This is what I've tried so far
Private Sub Worksheet_Change(ByVal Target As Range)
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
If Target(1, 1) = "C" Then
If Target(1, 2) > "30" Then MsgBox("1")
End If
If Target(1, 1).Address = "$E$4" Then
If Target(1, 2).Address = "$A$4" Then
Target(1, 1) = "F" Then
Target(1,2) > "38" Then MsgBox("2")
End If
Basically I have a column (lets call it column A) whereby I manually fill the cells green once I have received some documents, another column which has a numeric value in it (column B) and I want to create a third column which basically just copies column B but ONLY if column A is filled with a colour (actual colour doesn't matter cause I only use green)
I tried using the IF function but I don't know how to use cell colour as the logical test
I'm trying to write a macro to test whether a cell has any neighbouring cells that match it's value.
I'd like this to be cumulative so that the more matches, the higher the value.
I'd then like the result to be written in another cell to set up a separate grid.
So far I'm getting error messages and I don't know why:
In column AX2:AX2000 there is a value(alpha numeric) MB60176685 and in column AX2:AX2000 there are various values.
I would like to test if any cell in AZ 2:2000 is greater than 200. If yes then blank AZ in that row. If less than 200 go to the next row. The value of AX will remain the same in that row.
SEE EXAMPLE of results BELOW
AX AZ
201
MB400174444 10
MB400174444 155
I have the followinf formula
=IF(A2="","",IF(C2>TODAY(),"",IF(E2="",IF(B2="1st",WORKDAY(A2,4,$H$1),WORKDAY(A2,5,$H$1)),C2)))
What I am trying to do is cause (where the formula is) to:
If A2 is empty, put nothing,
If C2 is greater than today put nothing, otherwise put C2
If E2 is empty then if b2 is "1st" add 4 workdays to A2, otherwise add 5 workdays.
I seem to have a problem with getting the formula to put the value of C2 if it is not greater than today In otherwords if the date in C2 is 6th Jan, i want 6th Jan as the result of the formula.
I need a function that will use a column of text values and test these values
to see if one or more of the values exist in a single cell. If it does I need
the function to return true or false.
Ie. cell A1 contains the text "Jim Smith" the B column contains the test
names (column of test values ) ie. B1 is "bill" B2 is "fred" B3 is "jim".
Because Jim is in the cell A1 I would need the function in C1 to return the
value "true". If A1 contained the text "bob smith" then function in C1 would
return the value "false".
I have two different functions, first is importing website to excel and the a second is testing string according to pattern. Each one of them is working ok. I'm trying to find a word " finance" in URL and put it into cell "A1".
Sub ParseWebsite()
Application.DisplayAlerts = False
On Error Resume Next
For i = 1 To 10
SiteURL = "URL;http://www.cnn.com"
With ActiveSheet.QueryTables.Add(Connection:=SiteURL, Destination:=Range("A" & i))
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False................
I have a macro that takes a value of one cell ("Cells(iFoundPass, 5")) and makes another cell (Admin_Level) equal it (the valules can be wither 'Administartor' or 'Standard'). When someone runs a macro it checks to see if "Admin_Level" equals "Administrator". The problem is that when that first macro runs, even if ("Cells(iFoundPass, 5")= "Administartor" and then "Admin_Level" will be made "Administrator" , my IF/THEN statements do not work. I think this is because the value of "Admin_Level"("Administrator" in the example above) is not text. I can't seem to figure out why. I do know, though, if I manually enter in 'Administrator' in the cell name "Admin_Level" then my IF/THEN works.
Sheets("Config").Range("Admin_Level") = Sheets("Config").Cells(iFoundPass, 5)
and then this is the logical check that runs anytime someone wants to run a macro...
If wb.Worksheets("Config").Range("Admin_Level") <> "Administrator" Then
PasswordForm.Show
End If