I do a lot of validation of Workbooks (Excel 2000). To physically show that only specific cells are unlocked I use a combination of Defined Names and Conditional formatting which uses the old Excel 4 macro command "GET.CELL" as follows
View 4 Replies
The document shows a table on the left that puts the data from the table on the right into order by total (and if same, alphebetical by name). However the formula used to achive this is not compatable with previous versions of excel. Need alternative function that will bring the same outcome but work with pre 2007 versions (ie .xls file extention).
View 3 Replies View RelatedI have a spreadsheet that collates a list of data from week order and puts them in a graph. I have a macro created that basically does the graph, it works fine in 2003 but not in office 2007. I get an error "Run Time Error '1004' Application-defined or object-defined error, then when I click the debug button it highlights "ActiveSheet.ChartObjects.Delete". I'm not sure if when its trying to create a new graph its attempting to delete the old one and isnt deleting it? The full code for the macro is below:
Sub updateStuff()
Dim searchResult As Range 'Result of the find operation - to check if it has worked or not
Application.ScreenUpdating = False
If SheetExists("OTIF Chart") Then
Application.DisplayAlerts = False
Sheets("OTIF Chart").Delete
Application.DisplayAlerts = True
End If
Sheets("OTIF's").Select
Range("B4:N4").Select
Selection.Copy
Sheets("Graph").Select
Range("B1").Select................................
I have made a couple of Macros in VBA for 2007 that resize re-font etc a graph, and another one that exports te graph as an image. I want to use these macros on a few other machines but they are running older versions of Excel and i get an error when i try and use the macros.
Would someone mind taking a look and showing me how to adapt them to work in excel 2000/2003
First macro:
Attribute VB_Name = "Module11"
Option Explicit
Sub ModifyChart()
Attribute ModifyChart.VB_ProcData.VB_Invoke_Func = "u
14"
ActiveChart.ChartArea.Width = 900
ActiveChart.ChartArea.Height = 600
ActiveChart.ChartArea.Interior.Color = RGB(233, 233, 233)
ActiveChart.PlotArea.Interior.Color = RGB(233, 233, 233)
If ActiveChart.HasLegend Then
ActiveChart.Legend.Font.Name = "Verdana"
ActiveChart.Legend.Font.Size = 16
End If..........................................
I have an excel file saved as macro-enabled that is perfectly functional and can be opened on my computer (via Security Warning - Enable Macros). The file is saved on another computer, through which I am accessing by a network.
This other computer is unable to run the macros, and when we open the file in excel there is no security warning that pops up (like there is on my computer). I have gone to the Excel Options and entered the trust center settings, and finally the Macro Settings. It is set at Disable all macros with notification. (same for both computers... but on one of the computers there is no security warning that pops up)
We tried enabling all macros (temporarily) and tried re-opening the file and running a macro. We got an error message saying that macros were not enabled.
We also made the file a trusted location and saw no changes.
All my macros have suddenly started crashing Excel 2007 when I try to run any one of them. I can record a new macro but even that newly recorded macro will crash Excel.
Service Pack 1 was downloaded and installed by Windows Update two days ago and I had successfully run macros after SP1 was installed.
Today, it's a no go and I'm at a loss as to what may have caused this problem. I have not installed any software lately, other than the Windows updates on patch Tuesday.
This is on a Vista Home Premium machine.
When I try to run a macro, Excel crashes with this info:
I am attempting to pass a boolean variable between two macros. The SUBMIT macro calls the STATUS macro to do some verifications and the STATUS macro should return the boolean variable RDY back to the SUBMIT macro, but does not.
I am using Excel 2007. Both macros are in the same Module. The STATUS macro is called from several places in the code.
Public Rdy As Boolean
Sub Submit()
[code]
Call Status
If Rdy=True then msgbox("You have completed your form") else msgbox ("Not ready")
[code]
end sub
[Code]....
I have written a 2007 workbook which contains 4 simple macros. One of the macros automates the process of saving the print range as a .pdf file. It works fine on my pc but when I send it to others to use, when they try the macros, they all return a 1004 runtime error.
View 6 Replies View RelatedI recently had a virus on my computer and had to replace it. I had a ton of macros saved in my Personal.xlsb workbook, so I exported those modules and have now imported them to the new Personal.xlsb file. Now for some reason those macros no longer work in other files. Most of them are basic, like I have a macro to paste values or paste formats, etc. but I have some others that are very complex. The macros work fine as long as I am in Personal.xlsb, but if I try to use them in another open workbook I get the "all macros may be disabled or the macro may not be available in this workbook" message. I am using Excel 07 and have verified that macros are enabled.
View 3 Replies View RelatedI have excel 2007 and I want to record a macro. I have enabled all macros via the Trust Center settings and have even saved the current workbook (created from scratch in 2007) to a macro-enabled version.
But when I click on the 'developer' toolbar, 'record macro' is grayed out.
"How to create a 'main' macro to control other macros within a workbook". I have my individual macros created. There's one macro for each sheet that searches online data and returns the information. I have one of these per sheet (a total of 20 sheets) since I couldn't find a way to have all 20 macros be on one sheet and still work. My trouble is that whenever I'm on my 'main' sheet and try to run the macro which applies to a 'secondary' sheet, I get an error. I have to select the sheet first, then run the macro and it works. Below is the macro on each sheet.
VB:
Sub Holding1()
Dim DataSheet As Worksheet
Dim EndDate As Date [code].....
Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 71 bytes) in /home/eforum/public_html/search.php on line 1155. I have following macro, what worked just fine in 2003. Now I'm working with 2007 and I can't set up the Microsoft Visual Basic for Applications Extensibility library. Here's the
View 2 Replies View RelatedI have a workbook in excel 2003 which I had been running the following macros (listed below). We recently upgraded to Excel 07, and neither are working. When I try to run them, the "debug" option highlights the following line in the sort macro "Range("A2:z" & lastcell).Sort key1:=.Columns(1)". This is driving me crazy, as the macros worked perfectly under the older version of Microsoft. Is there an issue with crossfunctionality between '03 and '07'.
Private Sub Worksheet_change(ByVal target As Excel.Range)
If target.Column = 1 Then
ThisRow = target.Row
startRow = 1
i = 1
Set ws = ActiveSheet
maxRow = Cells.SpecialCells(xlLastCell).Row
maxCol = Cells.SpecialCells(xlLastCell).Column
ActiveSheet.UsedRange.Interior.ColorIndex = xlNone
Do While i
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
What is the commands or script for deleting a macro automatically using
another workbook macro.
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies View RelatedI have two macros. Macros 1 opens another excel file, counts the number of rows it has, inserts that number of rows into the master file and then copies the data over. Key code as follows (x3 for 3 worksheets)...
For k = 1 To numrows
Selection.EntireRow.Insert
Next k
Macros 2 'cleans' the appended data by systematically going through each row, checking if certain cells have data, and if not deletes the rows. Key code as follows (x3 for 3 worksheets)...
For l = lastrow To 12 Step -1
If WorksheetFunction.CountA(Range("B" & l & ":C" & l)) = 0 Then
Rows(l & ":" & l).Select
Selection.Delete Shift:=xlUp
edelrows = edelrows + 1
End If
Next l
Here's the weirdness. macros 1 runs fairly quick the first time out (few seconds). Macros 2 takes about 2 minutes to run (which I'm fine with). However, when I run macros 1 AFTER running Macros 2, Macros 1 goes from taking a few seconds to a few minutes.
how to use excel 4 macros. I do not even know where to put them. I have inherited some spreadsheets that have both Xcel 4 Macros and vba macros in them. (Well, I get a warning that I cannot switch them off when I disable macros on opening a workbook). I cannot even find the offending version 4 macros so that I can re-code them in VBA.
how do I install a macro from my laptop to another?
View 9 Replies View RelatedI'd like to be able to just open the spreadsheet up and have the macros already saved in there. Is there a way to save these macros?
View 2 Replies View RelatedI am currently volunteering for a small organisation. I have spent the last week designing a userform to be used by other staff members in their office. However, when I asked the manager 'Do you have Microsoft Office?', I got a very firm and definite 'yes' in response.
It turns out they are using LibreOffice, which is a free alternative. I have also tried to get my userform to work with Open Office - but cannot seem to get either to work.
I have changed the settings in both suites of software to 'Load/Save Basic Code' and enabled macros to run via the security options.
My userform is not that complex. I have limited knowledge of VBA and zero experience using Basic, so have come up stuck.
I need to write a macro whereby it queries a cell and if there is any value (it will be either blank or contain characters) in the cell a new row is to be inserted directly above the cell.
i have a matrix with all possible values.
i need to develop a macro, which will change the color of the cell according to the value of the cell.
for example if a specific cell in the matrix has a negative value then the macro should change the color of the cell to blue. if its value is positive then the macro should change the color of the respective cell to red.
I have an API that continuously gets stock price. The price appears in one cell at all times - let's call it A1
I want to record the value in a different cell every time it changes, so I can analyze the data.
so A1 = 15
B1 = 15
little later
A1 = 15.2
B2 = 15.2
I did some googling and came to a conclusion that I needed to write a macro.
I see that there is a function or event called Worksheet_Calculate()
Apparently it is supposed to do whatever when a value changes (per calculation)
How do I write a macro, and then execute it?
I've created an Add-in (.xlam file) in Excel 2007 and installed and activated it (it shows up under "Active Application Add-ins" on the Add-in menu for new workbooks).
I can see the macros and code when I go to the VBA editor, but the macros don't show up in the regular macro list.
I know that I can write code for the new workbook that will reference the Add-in code, but I want other users to be able to install the add-in and run the macros in it right away without any knowledge of VBA. Is there a way to make this possible?
I have created a excel spread sheet to be set up like a schedule, including multiple macros through the sheet, when I started it put the macros into "Module 1", now if I wanted to use this same worksheet and copy it and create multiple sheets in one file via the tabs does it make a difference where the macros reside? if it remains in "Module 1" it will only be in one spot will this create problems later on or should the each reside in the sheet objects.
View 9 Replies View Relatedhow do I use a macro across a spreadsheet?I can record a macro OK,but when I try to use it again on the same spreadsheet all I get is the macro calculating using the same data as when I recorded it.I have several groups of data across one spreadsheet and I want to use the same macro over the entire sheet.How do I do this?
View 14 Replies View RelatedI have a spreadsheet which I used in a previous job, which was set up by our old IT Department. Basically, it allows me to save information onto it, which I can then retrieve, (in any conditions/search fields i.e. in a date range etc) but the problem is; when I try to use it on my laptop, I look at the editor used for macros, I can see that the spreadsheet is linked to the servers of my old company. Therefore, I cannot use it myself
I do not know a lot about macros etc. but I can send a copy of the spreadsheet to anybody who is willing to help!
I think it is just a case of changing the macros/strings of where to draw and save information to/from, but I don;t know.
I have some text in $a$1.
In Column B I have all kinds of stuff, including the text in $a$1.
How do I find and select the matching cell in Column B?
