Excel 2007 :: Create A Main Macro To Control Other Macros Within A Workbook?
Nov 7, 2012
"How to create a 'main' macro to control other macros within a workbook". I have my individual macros created. There's one macro for each sheet that searches online data and returns the information. I have one of these per sheet (a total of 20 sheets) since I couldn't find a way to have all 20 macros be on one sheet and still work. My trouble is that whenever I'm on my 'main' sheet and try to run the macro which applies to a 'secondary' sheet, I get an error. I have to select the sheet first, then run the macro and it works. Below is the macro on each sheet.
VB:
Sub Holding1()
Dim DataSheet As Worksheet
Dim EndDate As Date [code].....
I have excel 2007 and I want to record a macro. I have enabled all macros via the Trust Center settings and have even saved the current workbook (created from scratch in 2007) to a macro-enabled version.
But when I click on the 'developer' toolbar, 'record macro' is grayed out.
Trying to create a macro to run through the following steps when I select a chart and run the macro:
Paste>As Picture>Copy As Picture>As Shown When Printed>OK
I used the macro record feature and when I enter the shortcut it always returns the same chart. How do I get it to run on whatever chart I have selected instead?
I am constantly using this function to copy charts from Excel into PowerPoint presentations and am frustrated with all the extra steps it takes (versus just Ctrl-C).
I'm trying to update a the summary sheet that will run through the 10 worksheets and bring back the entire row (or the columns I specify) that matches the creteria MS.
MS will appear against each row in the same column in all the tabs.
So in the summary sheet I would see all the rows individually that appear in tabs 1-10.
I have a macro with "ActiveWorkbook.Protect Password:="password"" . It was working fine in excel 2003. In excel 2007, because of this I am not able to run any macro's in the workbook. I am getting a message "The macro may not be available in this workbook or all macros may be disabled. I can see a security warning in message bar saying macros have been disabled, but I dont have have a option to enable the macros.
I am using 2007. This may be something simple but I can't seem to find a solution to this, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file here is the code used for the tasks in the
workbook:Sub Step1_Refresh() ' ' Step1_Refresh Macro ' ' ActiveWorkbook.RefreshAll End Sub Sub step2_save_close()
I am using 2007, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file.
I have a macro that opens all workbooks from one directory and runs a macro for each workbook to clean up the data. I cannot figure out how to take all those open workbooks and save them to another directory and close the workbook. Also, I do not want the macro workbook (xlsm) to save. I only want it to close. I am working in 2007 Excel.
I have an excel file saved as macro-enabled that is perfectly functional and can be opened on my computer (via Security Warning - Enable Macros). The file is saved on another computer, through which I am accessing by a network.
This other computer is unable to run the macros, and when we open the file in excel there is no security warning that pops up (like there is on my computer). I have gone to the Excel Options and entered the trust center settings, and finally the Macro Settings. It is set at Disable all macros with notification. (same for both computers... but on one of the computers there is no security warning that pops up)
We tried enabling all macros (temporarily) and tried re-opening the file and running a macro. We got an error message saying that macros were not enabled.
We also made the file a trusted location and saw no changes.
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
My set up office 2007 win xp pro ie 8 I am using the code below to retrieve web pages etc it works fine, however it display in differ areas of the screen, so I was wondering if there is a way to control the positioning and the size of the window?
Code: Set EXP = CreateObject("InternetExplorer.application") EXP.Visible = True EXP.Navigate (aurl)
I have a form that collects four pieces of information from the user and places each into columns A, B, C, D on a sheet. I would like to automatically add an option button to column E so that a user could select it and then click a control button to delete the corresponding row.
Is this possible or is there maybe a better way to do this in Excel 2007.
My drop downs are simple yes/no/NA witht a down arrow apprearing to the right. Works fine for all users except one troublemaker who for some reason sees the text and arrow as a mirrored, upside down image. It's not rotated to be upside down, it's mirrored so if you turned your monitor upside down you'd see the letters in the words backwards as if looking in a mirror. We're both on Excel 2007.
I am attempting to pass a boolean variable between two macros. The SUBMIT macro calls the STATUS macro to do some verifications and the STATUS macro should return the boolean variable RDY back to the SUBMIT macro, but does not.
I am using Excel 2007. Both macros are in the same Module. The STATUS macro is called from several places in the code.
Public Rdy As Boolean Sub Submit() [code] Call Status If Rdy=True then msgbox("You have completed your form") else msgbox ("Not ready") [code] end sub
I have written a 2007 workbook which contains 4 simple macros. One of the macros automates the process of saving the print range as a .pdf file. It works fine on my pc but when I send it to others to use, when they try the macros, they all return a 1004 runtime error.
I recently had a virus on my computer and had to replace it. I had a ton of macros saved in my Personal.xlsb workbook, so I exported those modules and have now imported them to the new Personal.xlsb file. Now for some reason those macros no longer work in other files. Most of them are basic, like I have a macro to paste values or paste formats, etc. but I have some others that are very complex. The macros work fine as long as I am in Personal.xlsb, but if I try to use them in another open workbook I get the "all macros may be disabled or the macro may not be available in this workbook" message. I am using Excel 07 and have verified that macros are enabled.
I have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .
I am familiar how to perform the task of bringing in an access table into excel, then using a data validation filter to control the data set in Excel 2003.
I need to copy several macros from the Personal Macro workbook to a new workbook that I need to take to another computer. I need to be able to run the macros on that computer. I can only record macros and make minor changes in the VB editor. I do not know VB code.
I have created a individual tracker spread sheet in each user system and on the spread sheet I have inserted 2 buttons in 1st sheet. when employee wants to take a break he has to click on the log out button and when he came back he needs to click on login button. I have another sheet named "timings" and I have created 2 columns, one is login and another is logout. What I need is when user click on the login button, the system time and date to be auto update under login column and when he clicks on logout button the system time and date to be auto update under logout column.
I have column "A" a list of my PDF filenames and File path in Column "B". I want to establish hyperlinks for each of these PDF filenames (column A) and link it with the file path that I generated in Column B.
=HYPERLINK(B1,A1) did it very well, but unfortunately when converting to PDF, the hyperlink is not working, and I believe the conversion retained is only in text, so now my only resort is hardcoding it by VBA.
I am struggling with trying to create a Top 10 list in Excel 2007. I have googled and search the forum but could not find a solution. (Aplogies if i have overlooked a thread)
I have attached an example of my problem.
1. In Column F i would like to extract the names of the Top 10 performers, based on their respective score. Hence, based on the scoring in Column D, Column F should extract the Top 10 performer names from column A.
2. In Column G, same as above, but bottom 10 names
3. From the attachment, you will view some names are highlighted. I.e. Gary & Neil, and Ian & Michael. These are highlighted based on the fact that they have equal scores.
When extracting the Top / Bottom 10 list, i would like to rank the performers with same score differently. e.g. Gary & Neil, both scored 0%, hence they are equal. But in the Top 10 list, i would like to rank Gary higher as his absolute target is higher. (63 vs. 27) . Same applies to Ian & Michael, Michael should rank higher in the Bottom 10 List as his absolute target is higher.
This forumla generates a number for each player, the higher the number the more inline they are to get a game
Problems are this works for the 29 weeks of this year but more weeks need added to the end of the year as we get there. Can i generate the array numbers from a formula and shorten.
This is a sample data ignore row 2( just a count of players) and data actually goes back to 6th Jan
I would like to create a PDF file from a RANGE Name, excel 2007, attach it to MS Outlook 2007, Once in Outlook I will select the recipient, add some remarks and hit send. I can do this now with a workbook but not a range.
I've created a spreadsheet at work that has two summary tabs which contain hyperlinks to around 30 separate sheet tabs.
On each sheet tab there is a list of unique values in column A (and other information relating to each value in columns B to D which are repeated for more than one unique value). In column E, users enter a test script name against each unique value they wish to 'reserve', and the macro picks out the unique test script names and via the COUNTIF formula counts the frequency of each test script name for each of the different values in column B.
My problem is that the macro seems to work fine if the workbook is not shared, but errors if the workbook is saved as shared. The error is 'Run time error 1004 - Unable to select the MergeCells property of the Range class'.
Here is the macro code:
Sub Get_Policies_Per_Script(updCol As Long, ShtName As String) Dim rowctr As Long Dim tgtrow As Long
Const ppsformula As String = "=COUNTIFS($A$3:$A$65000,I$24,$E$3:$E$65000,$G"
If updCol = 5 Then 'test name column has been modified
I want to select a date of choice from a calendar in a field within an Excel spreadsheet.
I do not know how to do userforms and so that is why I wonder if I can add this in just a spreadsheet.
This is how far I have gotten so far: After doing the following, I have a static calendar setting in my spreadsheet like a text box showing the current date.
Developer Insert More Controls Calendar Control 12.0
I am concatenating some cells into an array. The amount fields should always have just 2 rounded digits following the decimal. What should change in the following VBA code to achieve that result?
Currently Cells(r, 6) & Cells(r, 7) could have these values: 1.5 24.78945678 45.2341
What I want is rounded values to 2 decimals: 1.50 24.79 45.23
The array is used as an input parameter in a remotely called function module, after logging into the remote system, SAP.
' delim is a | character
' Populate Myarray with data from all rows ' - Only from rows which are not hidden ' 05/23/2008
For r = 1 To row_count 'r is row number if worksheets("JEMASTER").rows(r).hidden = false then i = i + 1 'increment myarray index by 1 myarray.AppendRow
I am trying to implement the idea of creating an application with two workbooks: a hidden code workbook (CodeWb) that holds all of the forms and macros, and a separate visible data workbook (DataWb) that uses the macros in CodeWb. The DataWb houses a little bit of VBA code to open the CodeWb, which then supplies the programming power to handle click events, etc., performed by the user in the DataWb.
I have advanced to the point of being able to open CodeWb from DataWb and trigger execution of a macro named "DataFileOpen" in CodeWb. This macro initializes things in DataWb and creates buttons there on a particular sheet, using the line:
Application.Run "CodeWb.xlsm!DataFileOpen"
So far so good. This works fine. My problem is that nothing happens when I click on the buttons created in DataWb, with their event handling code residing in CodeWb. Obviously, I'm missing something that maintains a connection between the two workbooks.
How can I use the code in CodeWb to handle all events occurring in DataWb?
