Array Formula Works In One Portion But Not After Being Altered And Moved
Dec 18, 2013
I figured out exactly what I wanted to do and got it to work in a test excel sheet. However, when integrating it into the actual workbook I wanted, I was unable to get it to work. So, I used the same cell references I need to work in my actual workbook and pasted it all back to the test excel sheet.
So, the test excel sheet has the working formulas up at the top, and a duplicate of what I need to work in the actual cells I need them to work in. Changing the shift start time should group any persons with the same shift togethor. I'm still fairly new, but I think the only portion that could have been changed is the portion that says 1:1.. I figure that is relative to the array so it shouldn't be changed, but not sure what else to do.
Here's an array formula that works:
[Code]....
Here's the array formula to be in the correct cells that doesn't work:
[Code] ....
How to to get it to work in the different cell area.
Attached File : Shift.xlsx‎
View 3 Replies
ADVERTISEMENT
Jan 11, 2009
I have been exhausted with a workbook I have been working on for quite some time now, and hope I can get some help here.
I have the following array formula in Sheet1, S2 and copied down to S10051:
View 14 Replies
View Related
Jun 24, 2009
I faced a problem to attach this small WB as an XLS
I'm looking for some way to some the red cells without looping.
In this example the array was filled with A1:A10 values.
In the real situation the array gets its values from other source than a Worksheet Range.
As you can see I manged to transport the Array Values to F1:F10 and from here I could calculate the sum of F3:F8 but I do not want to use any helper columns.
View 12 Replies
View Related
Feb 5, 2014
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
View 4 Replies
View Related
Mar 22, 2012
I am in need of a formula. I have a number like: 23847-2
I want a formula to take this number and add one to the number before the hyphen. I also want the single digit number after the hyphen to be able to be changed.
So in the end: i want the number copied to the next cell, add one to the portion before the hyphen. Then allow the number after the hyphen to be changed manually.
View 7 Replies
View Related
Jan 27, 2014
C4 - #01941 (ATF Cleaner)
I have asked this before as to a formula to get rid of the text and only leave the #01941. The formula I received is =LEFT(C4,FIND(" ",C4)-1) and it works fine.
My queston now is there a way to only leave ATF Cleaner? No ( ) around it?
View 4 Replies
View Related
Aug 28, 2007
I have the following formula (basically a concatenation of a few different cells):
=R2&", "&Q2&" {"&U2&"}"&" ("&V2&" Days)"
I was hoping to make bold and maybe larger font the " ("&V2&" Days)"
portion of it...
is that possible?
View 9 Replies
View Related
Oct 14, 2008
I want to do a vlookup between two tabs on a date in cell A1 eg 01-Apr-08
The lookup needs to be on month and year so I'm using
=Month(A1) which gives an answer 4 in cell A2
=Year(A1) which gives an answer 2008 in cell B2
I then oncatenate the results (=A2&B2) to get a unique reference 12008 - works ok
On the second tab, I've repeated the formula, I get an answer of 1 and 2008 but when I concatenate, I get a #VALUE!
I've tried
"text to columns"
unchecked Protect on the cells
worksheet is not protected
on the 1 and 2008 and concatenated result
View 9 Replies
View Related
Nov 12, 2009
I have a odd problem. I have workbook that I made I placed this formula in cell A1
View 3 Replies
View Related
Jan 23, 2012
I am trying to conditionally format using AND() to reference if there is a value in the top line of a table and the title in the right most column for each cell in the table, the formula I am using works when i paste it into cells (i get the correct TRUE or FALSE for each cell in the sheet) but is not working as a format formula, I dont get an error but the shading does not happen.
The formula:
=AND(OFFSET($A$1,0,(COLUMN()-1),1,1)"",INDIRECT("a"&ROW())="Item1")
View 5 Replies
View Related
Jan 25, 2014
The formula I'm using is
Code:
=SUBSTITUTE(OFFSET(A10,-2,0),VLOOKUP(OFFSET(A10,-1,0),prim!$D$1:$I$263,5),VLOOKUP(OFFSET(A10,-1,0),prim!$D$1:$I$263,6))
But it doesn't work at all on one worksheet, half works on another, and works sometimes on another.
In the worksheet attached called workbook 4, it works a15 sheet 2, but not a10 sheet 2. But that was not always the case. In the worksheet attached justification copy, it works in a14 sheet 4 but not in a10 but for a good while it didn't work in both. In my own private doc it doesn't work in both cases.
[URL]
View 6 Replies
View Related
Jun 9, 2009
I have this formula :
=SUM(F25:M25*$F$6:$M$6)
It works great in xl2003, and it works properly in XL2007 until you try and change it. I changed the column F to Column D and now it gives me a #value.
How can I re-work this for xl2007?
View 3 Replies
View Related
Dec 2, 2007
Private Sub Zero()
If Range("G8").Value = "" Then
Range("G8").Value = "0"
End If
End Sub
I have this listed in as code for VBA. If I hit the "Run Sub/User Form" button on that screen, with the field G8 having nothing in it (having hit "Delete" just prior), it resets the field to "0".
But when I hit delete on the worksheet, the field just sits there......no zero, no nothing.
View 9 Replies
View Related
Mar 20, 2007
I have a nifty formula brought to me by one of the excellent members on this board. It works perfectly for what I want, but I must admit I cheated, I have a problem that was similar to the problem this formula rectified and I find myself not knowing how it works.
=IF('IIC Transfer Status'!O139="x",MIN('IIC Transfer Status'!K139+10-WEEKDAY('IIC Transfer Status'!K139-{1,3})), "" )
What Im wondering is if someone could enlighten me as to what is happening in this function, so Im not as blind to assume it is magic.
Eventually I need it to be customed tailored to work in this way: I have a column of dates, I want it to look at column A and if there is a date in it ADD 4 WEEKDAYS (business days) and return the resulting date.
i.e date in column a is march 19 plus 4 business days. Result in column B march 23.
If someone can explain how this string works that would be great, or if someone could just post a suitable function, that would work for now.
View 9 Replies
View Related
Nov 10, 2008
The problem i have is with the sum offset function. The formula i use is to sum up the totals for each page of an accounts document. At the top of each page there is a column with " £ p " in it and i use that as the basis of the formula. This formula is entered in the bottom of every page to calculate the total for each page.
=SUM(OFFSET(F211,-(ROW(F211)-MATCH("£*",$F$1:F210,1)-1),0,ROW(F211)-MATCH("£*",$F$1:F210,1)-1,1))
This works all the time but when text is entered into column F (the column i'm adding up) it messes up with the formula. the formula will instead find the £ p but for a page 2/3 pages before the one i'm calculating on. This formula only faults when text is entered. Another thing; this excel sheet i'm working on is an output from a different computer program. it is outputted as csv file i think.
Like i said the formula works a treat except when text is entered. The obvious way around this not to enter text but that is not an ideal option. I cannot think of another way of calculating the total for each page although i'm sure another exists.
View 9 Replies
View Related
Jan 19, 2010
I'm using the function Proper(A1) to clean up some columns that have some entries in all CAPS. It works fine. What I'd like to do now is get rid of the original column and just keep the altered one. Of course since the original is the source for the new one, when I delete it the new one goes nuts.
View 3 Replies
View Related
Jan 10, 2013
I need to fix formulas in cells so that this can't be altered by others or mistakenly erase formulas.
View 2 Replies
View Related
Jan 12, 2008
I have all my info in a hughe ammount of books and they are all linked b/w them (about 15 books with 5-10 sheets each), the big issue is this:
Every time someone changes anything in any book most of my links get broken or they grab the wrong info, it takes up to 5-7 hours just to find the cell/column/etc. that got changed to fix it.
I've been thinking in protecting all my books and sheets and only allow users to change certain data by unprotecting specific cells, and then create a macro that open/unprotect all books/sheets so when a major structure/formula change is needed, all files linked to that book are open (cause I belive excel updates their formulas-links when they are open).
then create another macro that protects every single sheet of all books, saves and closes them...
questions are:
1. Is this ok?, or am I just wasting my time?
2. Is there a shorter easier way to prevent this from happening (broken links)?
View 3 Replies
View Related
Jul 27, 2014
The formula works on numbers but not on time with format cell : [u]:mm:ss
HTML Code:Â
8
7
6
11
12
HTML Code:Â
8:00:00
8:00:00
6:00:00
3:00:00
[Code]....
View 1 Replies
View Related
Aug 23, 2013
I have a spreadsheet with a VLOOKUP formula that I have to send to a customer weekly. They are required to type a code in column E of what they invoice, and it pulls the rate into column G based on a rate table I have. The formula is: VLOOKUP(E2,Rates!A:B,2,0)
When I made the spreadsheet, the formula worked perfect. But when they type their codes in and send it back to me, it's messed up. All of the codes they've typed in do pull the correct rate. However, if I try to go to column E and type a different code on top of what they typed (a code that IS IN the rate table), it will tell me: "The value you entered is not valid. The user has restricted values that can be entered into this cell".
If I create a new tab and mimic the exact formula and columns as I am trying to work with, it works perfectly. But for some reason, once they've typed their data into my spreadsheet, something messes up even though the formula is perfect, dragged down, etc. All columns are formatted as text. And the range in the rate table is correct as well. When I try to mimic the formula in the other tab, if I click a cell in column E, there is a drop down list there showing all the available codes from my rate table to choose from. But on the spreadsheet that is messed up has no drop down list on the cells.
View 1 Replies
View Related
Oct 31, 2008
I am using this piece of code (supplied by a Board member ) to rename a sheet. If the sheet already exists then this piece of code gives the option to name it as Sheetname (2).
Here it is: ...
View 9 Replies
View Related
Nov 25, 2008
if the Paste Special pop up menu can be altered?
I am sure this is not the correct terminology... I am referring to the options that are available when you select Paste Special.
I want to change it so that the only option under Paste is Values. Can this be altered via VBA or is there an option somewhere within Excel to alter this menu. Hope this makes sense to whomever is reading it...
View 9 Replies
View Related
May 21, 2009
I have attached a sample of the issue. The formula is found in cell B49. If I enter a gravity of 2.76 or higher in cell B47 I get #N/A in cell B49. Why will it not read any farther over than 2.75. I have been starring at this for awhile now. I might look pretty dumb after someone else looks at it.
View 2 Replies
View Related
Feb 7, 2014
[Code] ....
User 1 will enter date in column AA, then data needs to be copied to column CY (data in CY must not change again). I have a if formula that check if any AA and CY is the same. If any changes was done, it will give the cell a "YES" trigger to send a mail.
I think the .value is incorrect.
View 3 Replies
View Related
Mar 1, 2007
How color the cell autmatically when the existing data is altered. the same needs to be done with the entired column
View 9 Replies
View Related
Nov 25, 2011
I am trying to create a trigger event that opens an email when a particular row is altered. This all worked fine, until I tried to take it a step further and insert information from the spreadhseet into the email aswell.
I receive Argument not optional.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 10 Then
Call GenerateEmail(Target.Address)
End If
End Sub
[Code]....
View 9 Replies
View Related
Jul 5, 2012
A1=www.google.com/testing/123/1234.jpg
A2=www.yahoo.com/
I need a formula to copy testing/123/1234.jpg to www/yahoo.com/
End result: A2 = www.yahoo.com/testing/123/1234.jpg
In reality, any data after www.google.com/ needs to copy to the end of www.yahoo.com/
View 4 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
Oct 9, 2007
I have the following formula that was in a workbook. I then moved the sheet to another workbook and now no longer works.
=INDIRECT(ADDRESS(ROW('[book1.xls]1000'!A509),COLUMN('[book1.xls]1000'!M$1),4,,1000*A6))
Does the INDIRECT function not work for references to other workbooks.
View 9 Replies
View Related
Jul 31, 2013
I have created two documents. One document (A) is my worksheet where I input data, the second document (B) is my spreadsheet where it comprises all my data into the fields I want. I have completed both documents on computer (1) and now need to transfer it to another computer (2). However my formulas no longer function after I move the document (A) from computer (1) to computer (2). Is there a way for me to work around this? Do I need to transfer the spreadsheet (B) to computer (2) in order for them to function correctly? How can I make it so I have the worksheet (A) on computer (1) enter data correctly into the spreadsheet (B) on computer (2)?
View 4 Replies
View Related
