I am in need of a formula. I have a number like: 23847-2
I want a formula to take this number and add one to the number before the hyphen. I also want the single digit number after the hyphen to be able to be changed.
So in the end: i want the number copied to the next cell, add one to the portion before the hyphen. Then allow the number after the hyphen to be changed manually.
I need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code:
Function parseNum(strSearch As String) As String
Dim i As Integer, tempVal As String
For i = 1 To Len(strSearch)
[Code]....
I have some data in the form of text w/ 8 letters. I'd like to insert a hyphen after the third character. Is this possible using a formula to populate an entire field? Example:
Current format: ABC01234
Desired format: ABC-01234
how do i get the numbers after the point.
View 9 Replies View Relatedtrunc gives just the numbers before the decimal point. how do i get the numbers after the point. original number minus trunc seems messy!
View 3 Replies View RelatedC4 - #01941 (ATF Cleaner)
I have asked this before as to a formula to get rid of the text and only leave the #01941. The formula I received is =LEFT(C4,FIND(" ",C4)-1) and it works fine.
My queston now is there a way to only leave ATF Cleaner? No ( ) around it?
I have the following formula (basically a concatenation of a few different cells):
=R2&", "&Q2&" {"&U2&"}"&" ("&V2&" Days)"
I was hoping to make bold and maybe larger font the " ("&V2&" Days)"
portion of it...
is that possible?
I have been exhausted with a workbook I have been working on for quite some time now, and hope I can get some help here.
I have the following array formula in Sheet1, S2 and copied down to S10051:
I figured out exactly what I wanted to do and got it to work in a test excel sheet. However, when integrating it into the actual workbook I wanted, I was unable to get it to work. So, I used the same cell references I need to work in my actual workbook and pasted it all back to the test excel sheet.
So, the test excel sheet has the working formulas up at the top, and a duplicate of what I need to work in the actual cells I need them to work in. Changing the shift start time should group any persons with the same shift togethor. I'm still fairly new, but I think the only portion that could have been changed is the portion that says 1:1.. I figure that is relative to the array so it shouldn't be changed, but not sure what else to do.
Here's an array formula that works:
[Code]....
Here's the array formula to be in the correct cells that doesn't work:
[Code] ....
How to to get it to work in the different cell area.
Attached File : Shift.xlsx
I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies View RelatedA1=www.google.com/testing/123/1234.jpg
A2=www.yahoo.com/
I need a formula to copy testing/123/1234.jpg to www/yahoo.com/
End result: A2 = www.yahoo.com/testing/123/1234.jpg
In reality, any data after www.google.com/ needs to copy to the end of www.yahoo.com/
I got problem with typing hyphen in the cell. Every time I type it shows something else like C9, D6 and so on.
View 6 Replies View RelatedWhen I use sum function to add a cell containing a hyphen "-" I would get a #VALVE! result in cell 3.
i.e Cell 1 = 8 Cell 2 = -
How do you sort a column of numbers with hyphens?
Example #####-###-####.
I want to sort by the 3 middle numbers
Excel has went from using the backslash to using a hyphen. If I try to format the cell, all the date choices use the hyphen, what possibly changed?
View 3 Replies View RelatedI am trying to type in 4-1 in a cell but can't get it to work, what am i doing wrong.
View 2 Replies View RelatedPlease see attached file. In my column L, I'm trying to find a formula that would reference my column J to the table in the data tab. My problem is the data in column J has a hyphen (-) in the number ex.. 047-258-1 and the next tab does not have a hyphen in between the number...ex 0472581. The correct results in cell L3 would be Walmart. How can I adjust my formula to accommodate this hyphen. Can this also be reflected in my pivot table as well?
View 6 Replies View Relatedi have two columns with account numbers, i need one column with both account numbers, separated by a hyphen, see below the first line would be 10-15.
10 15
10 20
10 30
10 40
10 41
10 41
What is the formula to cover multiple different text that could come up? I could have an answer that is NA, Yes and also a blank cell and if I could I would like to have it set up as follows:
NA = -
Blank Cell = 0
Yes = 1
I am setting up a new chart of accounts, with the format xxx-yyyy, where xxx is a three digit department number, and yyyy is the expense account. I am building a spreadsheet to populate the new chart of accounts to be uploaded into our accounting software. I would like to have a cell that takes the xxx from one cell, adds a hyphen, and combines it with the yyyy value. The result would be xxx-yyyy format.
View 3 Replies View RelatedI want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
I have a spreadsheet in excel 2003 that has alot of model numbers listed in a single column with a dash. Is their any way I can remove the dash and seperate the numbers into 2 columns?
Current Spreadsheet
Model Number
199-001
200-003
210-081
This is what I'm trying to accomplish
Column B Column C
199 001
200 003
210 081
Some code below which I have inherited, basically its looping through one column of data and removing the text at the beginning before the hyphen eg. '123 - data text' to 'data text'.
HTML Code:
'Remove everything before the hyphen in the activity column
Dim SearchStr
Dim CharOffset As Variant
Range("c7").Select
[Code] ......
I have a few thousand files that I'm trying to hyperlink into excel. The files are named with a date at the end of it. I want to be able to hyperlink to that file just by looking up the name without the date portion. So basically I'm asking if I could hyperlink a file with only a part of the name, and yes the names are distinct even without the date. I now am loading all of the file names into a spread sheet via a VBA code, however with almost 10k files that process takes longer than I'd like.
View 7 Replies View RelatedI faced a problem to attach this small WB as an XLS
I'm looking for some way to some the red cells without looping.
In this example the array was filled with A1:A10 values.
In the real situation the array gets its values from other source than a Worksheet Range.
As you can see I manged to transport the Array Values to F1:F10 and from here I could calculate the sum of F3:F8 but I do not want to use any helper columns.
I'm trying to sort a column of email addressees to determine how many have the extension .ac - basically I need to know how many student addresses are present in the column.
View 9 Replies View RelatedI find the protection options of Excel confusing. I have a pivot table. Alonside it our a few formula columns. I want to protect only the columns outside the pivot but can not get it to work. I tried this:
1) Highlight entire sheet
2) Format Cells Protection - remove checkmark from: Lock Cells
3) Highlight 4 rows outside pivot
4) Format Cells Protection - place checkmark in Lock Cells
5) Tools Protection Sheet - supply password
The result is that the 4 columns outside the pivot are indeed locked BUT SO IS THE PIVOT...ie you can not utlize the dropdowns!
It must have something to do with the pivot, on a regular sheet (no pivot) it works fine. Further if, while Protecting the sheet, I click the: allow Pivot table reporting box, then it allows dropdown usage but blows up as soon as you select something with an error about not being able to redisplay selected itemsbecause of protection being on....
I want to lookup a text value in an array (vlookup). However, instead of searching for the exact value I want to search for only the exact match of the first four characters of the text value. Example
If I have in Cell A1 the text value: 5154
In cell B1 I want to lookup 5154 in the values cells C1 to C6
614a215g
515476
29421cg
215a786
914215g
2154a6
The result would be 515476
I tried with this:
=VLOOKUP(A1,LEFT(Table4,4),1)
I have read Dave Hawley's reply to a member using LEFT and MID but I can't seem to make what I want, to work.
I have an address in the follwing format:
12 MAICH ROAD, MANUREWA CENTRAL, MANUKAU CITY
I need to extract the '12' to be placed in one cell, and the 'MAICH ROAD' in another cell.
Unfortunately not every address has a street number and is sometimes listed as follows:
LEYTON WAY, MANUKAU CENTRAL, MANUKAU CITY
I still need to be able to put the 'LEYTON WAY' portion into the same column as the 'MAICH ROAD' in the previous example.
Transferring a portion of a date from one excel to another. On the file attached, the 1st column lists the date, and the second column needs to show the date in text format.
3-Jan-14 —> “January”
How this can be done?
Attached File : Month Problem.xlsx