Im new to Macros. Im trying to find a string of text assign that to be the top of the data and then find a different string and assign that to be the bottom of the data. Then run a loop whilst inside that data range. Am i going about it the right way? Attached is a sample data file.
View 4 RepliesMy question is about assigning strings to an array.
The following code searches a cell for three strings (said, told, asked):
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
I receive data from different sources and one column is usually in upper case, but I prefer to use proper (title) case. The problem is that the data frequently contains text strings that should remain in upper case or should combine upper and lower case letters. Examples follow:
Data received:
COROLLA AE90, AE92
COROLLA SX, GTI
Data should look like:
Corolla AE90, AE92
Corolla SX, GTi
Note that 'GTi' is upper case 'GT' and lower case 'i'.
I've set up a spreadsheet 'CaseConverter.xls' as a look-up, with a range ('SpecialCase' - A2:A65536) featuring names, codes and acronyms represented correctly. Is it possible to use a macro to run Excel's global replace to search for upper case strings in one spreadsheet and replace with the correct strings from the other spreadsheet? The macro would have to loop through the entire 'SpecialCase' range and look in the supplied spreadsheet for versions of the data in the special case range without being case-specific. The supplied spreadsheet (see attached for example data) is called 'Application.xls'. Column B is what I'm trying to reach.
I have a column of data in the following format:
Hardware (somethingsmall) otherinfo
Hardware ( somethingdisplaced)
Blackbox item (somethingelse) other info
Service(aservice)
etc
I need to extract the data within the brackets allowing for additional spaces for use in a second query which will search for each individual line item in turn.
For some reason the query does not like searching for the raw data in it's current format so I'm trying to extract the key information for searching instead.
I can do it in excel by:
(Assuming data is in cell V36)
'in colum x
=FIND("(",V36)
'in column y
=FIND(")",V36)
'in column z
=MID(V36,X36+1,Y36-(X36+2))
in column aa
=IF(LEFT(Z36,1)=" ", MID(Z36,2,20),Z36)
I have tried doing this cleverly in VBA and failed and then ended up trying to enter this code in the cells within the VBA code and do it that way but I'm having difficulty in doing this also.
I am very comfortable with VBA but I usually avoid using formulas if at all possible (unfortunately, I have, formulas are unavoidable (by request).. so formulas it is)
I will try to explain
Column A is a list of dates (ever expanding)
Column B is a list of names ( multiple entries of various names but aligned with various dates)
Column H is a list of names (each possible name which can appear in column B, no duplicates)
Cell I1 = A Date
Cell J1 = A Date
(forming a date range)
Basically what I need to do is:
= COUNTIF(B:B,H2) - but only count it if it is withing the date range (>=I1 & <=J1)
I have tried wrapping it in an IF statement but I can't seem to get it to work.
Need formula to find a specific account no. from a range of text and return that account's value as a usable numeric.
Account number:012345678 XZ
Account value as of 12/31/2013:$12,345,56
Account number:987654321
Account value as of 12/31/2013:$876,543.21
I have the following issue. I have a list of strings. Each string contains certain characters that are exactly the same for all strings, some characters are different making the string longer (in some cases). What I need to do is extract some combination of characters from each string. The strings look like this:
AB & CDE & FG & I mmmm yyyy.HIJK
AB & CDE & FG & II mmmm yyyy.HIJK
The part "AB & CDE & FG & " (incl. spaces) is the same for each string. The next part contains a roman count from I to VII, causing the length of each string to vary. The "mmmm" part contains the current month spelled in full e.g. December. This part differs as well, for each string. The "yyyy" part contains the year in four digits, e.g. 2007. The part after the dot is the same for each string again.
What I need to do:
- is to extract the month and assign it to a new string
- extract the year and assign it to a new string
- extract the roman number, translate it to a normal number (II -> 2) and assign to a string (or integer).
What I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells
The data I require is :-
(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson
(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)
(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting
See examples 1 & 2 below
Example 1
CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting
Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before
Example 2
CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers
Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.
As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text
I'm trying to build a formula that counts the amount of cells within a range that contain multiple strings of text within the same cell. I only know how to build a formula that snags cells that contain 1 but not 2 different ones within the same cell. For example: I want to count cells if they have the word BALL and STICK somewhere in the cell....see three cell examples below
gameballnetstick
ballgame
stick ball
tenballs
green stick
Of the three examples: it would only count cells: gameballnetstick and stickball
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies View RelatedHow many text strings in a reference column appear in paragraphs of text listed in another column within excel.
So column A contains text strings such as:
{{Advisor_Signature__c}}
{{Advisors_Initials__c}}
{{Advisors_Job_Title__c}}
{{Age__c}}
And I need to see whether any of these appear in cells in a reference column G. If they do, I would like to return 'Used' into column B.
An example of the type of text in each cell in column G is:
"If you have any questions regarding your offer, please contact me. For any questions regarding your benefits, payroll or company policies and programs, please contact HR. Sincerely, {{Advisor_Signature__c}} {{Advisors_Job_Title__c}}"
I don't seem to able to search for a text string across multiple reference cells.
I have hundreds of records of customer info and I am trying to categorize the job titles so that I can conduct some analysis with a pivot table. My problem is that there is about 20 different ways and variations of "manager" so Instead of autofiltering for "mrg." "Manager" "marketing manager" ect. and then replacing the text manually and using the enter and fill process (to create some standardization to compare "manager" to "director" to "c-level" to "consultant", etc.) and repeating this process over and over again...
I would like to create a VBA that would search the column "job title" for multiple text strings at once and if the text string was true in the cell then the cell would be replaced by a new text string "Manager". I was thinking a series of if functions within one vba but I am not sure if this is possible.
I've been doing a very simple table for my father's bass club. The club has one tournament a month and the 2 lowest weights are dropped. The table has a column of names on the left hand side, beside the name is 12 columns for one weight per month, right of that is a sum of the fisherman's catch weight in column O and to the far right is an equation that removes the 2 lowest weights =O4-(SMALL(C4:N4,1)+SMALL(C4:N4,2))
In the past I have put a 0 if someone didn't fish. He has asked me if it's possible to put DNF for Did Not Fish in lieu of a 0. This way they have that information and know how many people fished and caught nothing versus how many didn't fish. I need to know how to assign DNF a value of 0 for the whole table so that I can still drop the 2 lowest weights
I am a teacher and need a column of student names (which will all be different) but also need to assign them a numerical value of 1 to analyze my data. How can I do this?
View 3 Replies View RelatedIs it possible once you have assigned text a numerical value (example: Adam = 12) to add them together? (example: adam =12 and bob = 8, therefore adam + bob = 20)
how to Chk the text string in particular cell, compare it with a super set column and get the full from of the text string from another corresponsing column and the output will be corresponsing full form of the chked text string?
View 6 Replies View RelatedHow do I use an Excel formula to find which (if any) multiple sets, each of up to 50 words, exist in a series of rows of a spreadsheet - if set A has one or more words found in a searched cell.
A positive result will return a specific value in the designated result cell. If none of the words in Set A is found in the searched cell, the formulae will repeat the test for the words in Set B, and so on.
After all 50 sets of words have been tested, the formula will move to the next cell in the searched column.
New words will be added to the sets of words continually as required.
Multiple words within sets are included in double quotes. Within each set of words there will be some n-tuples of words (i.e. 24 adjacent words) that contain one or more of the words in the set, but for which the formula will be required to return a negative result. Example: Set A = word 1, word2, word 3, "word1 word2 word3". (The words within a set could also be each entered in separate columns, as opposed to all included in a single cell.) The single column of text to be searched is about 10,000 rows.
I am wanting to use the above in a spreadsheet that contains data downloaded from a series of bank accounts to automatically allocate items of expenditure to one of 20 or so different categories of expenditure.
The formula will search the description field to find words that are used in the in the downloaded files from the various accounts to describe each transaction.
If a word describing travel expenditure (e.g. hotel, "holiday inn" but not "holiday travel") is found in the description of an expenditure item - the item cost will be allocated to the TRAVEL EXPENDITURE column, which is one of 20 or so different categories of expenditure.
Happy to consider a different solution if the task can be done better a different way.
Tried using a combination of INDEX/SEARCH/IF in Excel, but was not able to get a correct result. PS I am using Excel 2011 for Mac - which does not allow macros, so the solution needs to be entirely formula based.
I have a number of cells which are connected to various formulas. EX. A1 = 7. Well I want a formula in A2 which can look at A1 and if A1 = 5-6, then A2 = 1, if A1 = 7-8, then A2 =2, if A1 = 9-10, then A2 = 3, if A1 = 11-12, then A2 = 4. And so on.
I have the following string which I want to assign to my rngTAddress (dim as range) variable.
='M:1 - Schedules & Spreadsheets[04 Subcontractor Cumulative Billing Tracker.xls]LCD'!$AZ$79
This string is current stored in the strTargetRange variable.
How do I get rngTAddress to refer to this cell in another workbook by assigning this string as the range?
Ultimately I want to use rngTAddress.offset(-2,0) in a formula.
I am trying to do is when a certain criteria is met I want to pull some information from the net using a web query, and then pasting it into a variable location. I have this code -
Sub Check_Matches()
Dim XLoop As Integer, XPlay_Row As Integer, Loop_Length As Integer
Dim Match_Ref As String, Team_Addr As String, Match_ID As String, Import_Addr As String
XLoop = 1
XPlay_Row = 5
Loop_Length = Range("j1").Value + 1
Do While XLoop < Loop_Length
Team_Addr = "S" & XPlay_Row 'A variable that stores the reference to the cell containing the team ID.....................
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
I have a large .txt file that I would like to edit using VBA. What I would like to do is to find each of the following text strings in the text file :
De:
De :
Envoye
A:
Objet:
If the character right before those text strings is not a carriage return (chr(13) then add a carriage return.
I would like the code to read each line in the text file and execute the task mentioned above.
Cell A1: can contain any number between 1 and 4 (with two decimal places, i.e. 2.36 or 3.99)
Cell A2: based on what number is in A1, this field should return corresponding percentage (%), based on the following criteria:
1: is 100%
2.99: 1%
3 (including) and less (all the way to 4): 0%
Note: percentages between values 1 and 2.99 are equally spread
So let's say, when:
A1 is 1.00, then A2 should return 100%
A1 is 3.26, then A2 should return 0%
A1: is 1.25, then A2 should return 92% (or whatever percentage is correct based on above described criteria)
I have been working on some ODBC queries in Excel 2010.
First, I recorded them using Excel's Record Macro function, to get an idea of what sort of source data I would need. Then, I rewrote them into something a little more intelligible.
Pulling out all the sensitive info, I want to know how to add the .ListObject.DisplayName property back onto the results of the query. I tried doing it intuitively, but it didn't work. It was in there when I recorded the macro, but I can't seem to figure out where to put it back into the re-written code. Other parts of the code depend on the results of the query being a 'named field'.
[Code] .....
Also, where would I find out what all that stuff in Cnnect means? DBA, APA, EXC, FEN, etc are all just assignments, and I might like to change some to make this run a bit quicker, if I knew what they meant.
I am writing a code wherein I want to assign specific excel range to a declared variable and then paste this excel in outlook message ody but I am finding difficulty in assigning that range to variable " brng"
I think code is right and issue is there in excel setting.
Code:
Sub mailer()
'
'
'
Dim Ash As Worksheet
Dim brng As Range
Dim OutApp As Object
Dim OutMail As Object
'Windows("Copy of FF RPL REPORT_JULY").Activate
[Code] .......
I searched and found that to assign a name to a label based on a cell value requires the following
Label1.Caption = Worksheets("Sheet1").Range("A1").Value
which would assign the value in cell A1 as the caption for Label1. I've got a range of values in cells:
C4:N4
and I'd like to assign them as names to labels 1 through 12. How would I do that using VBA?
Different formula in different cells give me some text as output, to format this. I would like to copy and paste in one cell, so that I can easily then register a macro on top to wrap the text in one big cell.
View 1 Replies View RelatedI have a column filled with names per row. I wanted to standardize it by using the following format.
The comma after the last name is always an indicator to me that it is the last name.
<First Name> <Middle Initial(if any)> <Last Name>
My actual records contains the following:
BIMBO EPPING - OK
AHMAD SADICK - OK
Salana, Laura R - need to be arranged to > Laura R Salana
Cantos, Rhoda Grace J - need to be arranged to > Rhoda Grace J Cantos
Can the below be achieved with any formulae or macro -
I have 2 worksheets (sheet1 & sheet2). In sheet2, i have some colors in column A (e.g. "red" in A1, "blue" in A2, "green" in A3.
In sheet1, i have some text strings in column A, e.g.
A1: I love red color
A2: my pen in blue
A3: Green grass
A4: Orange juice
A5: I like red and blue
What i want in corresponding cells in column B, is the name of the color which is in column A. so my output should be
B1: red
B2: blue
B3: green
B4: "NIL" (any error message)
B5: red (even though it contains 2 color, i am happy to show any one of the colors it contains)