Auto Close After Print
Nov 12, 2006
I have a spreadsheet and I would like for it to automatically close after printing.
Long version: The sheet is set up with several fields that can be changed by the user, and the date/time are automatically entered upon opening the sheet. I want to ensure that all fields are reset, and the date/time are correctly updated, every time that the user uses the spreadsheet. The last thing the user will do when finished entering his information will be to print the form, so I figure this would be a good time to make the form close (if this is possible).
I have already entered a code to prevent the query "do you want to save changes" before closing. So when they open the spreadsheet it will always contain the same starting information.
View 9 Replies
ADVERTISEMENT
Apr 10, 2008
When i open an excel file, i need it to print 3 copies and then close itself without saving. This is because i have a file that must have 3 copies printed everyday. I know its lazy =) but i'm sure it will be very useful and i have seen it on a file before however i cannot successfully replicate it.
View 3 Replies
View Related
Mar 23, 2009
macro is not exiting from print preview mode. Need the VBA code so it can close the print preview mode (preferably not "private sub" code)
View 2 Replies
View Related
Feb 2, 2010
I have a macro to run which will clear out all rows and move them corresponding sheets on the same workbook. At the minute i have this macro to run at 21.00 hours everyday. Is it possible to fire this macro to auto run before me closing a workbook so i don;t need to wait and also worksheet is saved with the latest changes
View 3 Replies
View Related
Jan 18, 2009
Is there anyway that a workbook can be set up to close itself at a set time i.e 19.00hrs every day?
View 9 Replies
View Related
Jun 15, 2014
Any way to auto-close the excel application after finishing my macro run?
I tried this code,but it doesn't work... i added a sub and ran it like this:
Sub CloseandSave()
ActiveWorkbook.Close SaveChanges:=True
End Sub
to be more specific,there is a macro running,closes all open workbooks,but excel itself stays open...
View 4 Replies
View Related
Apr 1, 2014
At the time of opening the file some macros are running automatically in my file as per my requirement. If auto filter is on then it disturbs my program. Sometimes I forget to remove auto filter before closing the file and it cause a problem in my file after opening it again.
Requirement is: Is there any code to prevent the file closing if the auto filter is on and give me a warning message 'Please remove auto filter first'.
View 2 Replies
View Related
Apr 22, 2009
As an example, I have this code to open a message box saying "Hello" when Excel opens.
View 4 Replies
View Related
Dec 9, 2009
I have a 'few' workbooks that I have added some code to which auto closes the workbook if it has been inactive for more than 60 minutes.
Problem seems to be is that this doesn't envoke if a screen saver is active, does anyone have any VB code to disable the screen saver until after the workbook has closed.
View 6 Replies
View Related
Nov 26, 2012
I have a menu workbook with macro buttons that call different workbooks. Call the menu workbook (switchgear.xlsm). Switchgear contains 2 buttons. Button 1 closes switchgear and opens Book1. Button 2 closes switchgear and opens book 2.
If book1 is open and nothing has changed for 3 minutes I would like it to close and open switchgear.xlsm. I do not want it to just close in 3 minutes... I want it to close after 3 minutes of inactivity.
I have search all over and tried and tried to achieve this without success...
I have been able to get the timer to work but it gets caught in a loop. If I open book1 and close it in less than a min then 3 minutes later out of nowhere the code tries to run???
Secondly when this happens I see several book1 vba projects loaded in the editor window???
View 9 Replies
View Related
Dec 21, 2006
I have an excel file stored on a network drive for the purpose of information sharing. (File protected with a password)
But some the guys leave the file open for quiet long time and hence I cannot open the file for updating the data.
-I need to have a macro that runs every 5 minutes and displays an alert message saying "Please close the File" as long as the file is kept open.
-A second macro with a modified version of the above to close the file automatically after 5 minutes from file opening time after showing an alert message "You cannot leave the File Open, File is Closed Automatically!"
View 9 Replies
View Related
May 1, 2008
I'm working on a time sheet, and to make it easier to enter time i created a macro that sets the auto correct to correct a "." to a ":", but when the workbook closes i want to run a macro that deletes the auto correct rule.
View 13 Replies
View Related
Mar 24, 2007
I have the following code that displays a form at a user defined time and if the user does not press "Stop" then the workbook saves and closes. The user can press stop then the workbook remains open.
Here is what I have where:
Admin_Auto_Shutdown = Yes or No
Admin_Auto_Shutdown_Time = 3:34pm or user defined time (This doesn't seem to work??)
'Auto Shutdown CloseandSave
If UCase(wb.Worksheets("Admin"). Range("Admin_Auto_Shutdown").Value) = "YES" Then
Application .OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
End If
Sub AutoShutdown()
Application.OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
Auto_Shutdown_Form.Show
End Sub
Now, my question is about a timer that I can show on a form. When the form is displayed I would like to give the user 30 seconds to press stop (and keep the workbook open) or to press proceed and save and close or to not do anything and the workbook would close and save when the timer reaches zero.
Code for user form which is missing most everything...
Private Sub Halt_Click()
'If user whats to continue without closing
Auto_Shutdown_Form.Hide
End Sub
Private Sub Proceed_Click()
'If user whats to save and close
Auto_Shutdown_Form.Hide
How do I add a timer to this code where it will run this at the end of the timer?
Auto_Shutdown_Form.Hide
Application.DisplayAlerts = False
With ThisWorkbook
.Saved = True
.Close
End With
View 4 Replies
View Related
Mar 25, 2014
I have a problem on auto-sorting my data after clicking the "x" or "Close" button on DataForm. Im creating a command button that trigger a macro to open an autofill DataForm. I want a code that everytime i ADD or EDIT using the DataForm, it will automatically sort the Column A after clicking the "x" or "Close" button. Below is the code of my macro:
Code:
Sub OpenForm()
Sheets("DATA").Select
ActiveSheet.ShowDataForm
End Sub
View 1 Replies
View Related
Dec 5, 2008
I have a workbook, "A", that while open I need to be able to detect any type of activity within other open Excel workbooks "B...Z" that are simultaneously open.
I understand that I would need to use the Class Module with a Public WithEvents function but I am stuck here.
View 5 Replies
View Related
Jan 29, 2007
if there is a way with functions or code to automatically set the print area. I would like to have it set to start at A1 and print to column G & the first ROW with a zero value in column F.
The ROW in which the first zero value appears will be the only variable. It will
always be column G.
View 9 Replies
View Related
May 25, 2009
I have a spreadsheet where on one tab, there is a list of user inputs for each item number (i.e. Item 1 - Length A, Height B, Width C; Item 2 - Length D, Height E, Width F etc.) so the user is able to modify the number of items and the specs for each item. On another tab in cell BB8, the user is able to type in the item number and an image of that item is displayed. The user can then print out the image.
My problem is that usually the number of items is very big list and so it is tedious to manually change the item number each time you want to print out a particular image. I want to write a macro that can automatically change the item number and print out the corresponding image (So for example, if there are 10 items, print out all 10 images with a single macro, as opposed to manually changing the item number and pressing print each time).
View 9 Replies
View Related
Jan 11, 2010
I have a hard time transitioning from other examples to my workbook.
What I am after, is for the print area on 2 sheets to be set by the count of non-empty cells in column B on the first sheet.
I have a maximum number of entries of 200 (rows) plus a header row. So, my entry #200 is in worksheet row 201 (cell B201)
In cell B203 I use formula "COUNTA" to tell me how many cells are not empty. As an example, this number might be 36.
The print area should be limited to worksheet row 37 (1 more than 36 due to the header row). My columns are always the same, A thru I.
On a second worksheet, measurements are recorded, 10 per row. So, if I have 36 items to be measured, I use 4 rows (10 per row=3 full rows and 6/10 of the 4th row).
I would like to have the print areas set automatically, based on this number in cell B203 (see above notes). On the 1st sheet (using example of 36 entries), my print area needs to be thru row 37, columns A thru I. On the 2nd sheet, my print area needs to increase 10 rows every time B203 increases by 10.
(this 2nd sheet has other info on it, so when the print area increases, it needs to go in steps of 10 rows. as an example, if B203=8, then the print area on the 2nd sheet includes cell A1 thru cell K13, but if B203=12, then the print area would be cell A1 thru cell K23)
View 9 Replies
View Related
Jul 11, 2007
I have code to print an invoice to PDF, here is the printing part.
Sub Macro3()
Application.ActivePrinter = "Adobe PDF on Ne05:"
ActiveWindow.Worksheets("Sheet1").PrintOut From:=1, To:=1, Copies:=1, ActivePrinter:="Adobe PDF on Ne05:", Collate:=True
End Sub
When the code runs a box appears asking the user to save the PDF as a filename and the user never saves the correct invoice filename. Is there a way to suprees the box and automatically save as a predetermined name say "Invoice 0012 27-01-01"
View 8 Replies
View Related
Jun 4, 2009
Is there a way to set Excel to only print rows that have data in them? I have an end user spreadsheet where the number of rows they have each time differs and I don't want them to have to manually set the print area each time.
View 7 Replies
View Related
Jan 23, 2014
I have data that daily needs to be refreshed and printed to pdf.
I figure the simplest way to do this would be to task schedule the workbook to open daily. Then on open it will refresh the data, print it after all data has been refreshed and close the workbook.
I set it up originally without the need to print so I have all the queries set to refresh when opening the file, however when I now try and put the code to print to pdf on the workbook open event it runs before the queries are finished running. (Query notes: queries were created through Microsoft query, and are accessing a MySQL database queries set to refresh when opening the file queries set to enable background refresh).
View 4 Replies
View Related
Feb 19, 2014
I have a sheet that already has page breaks set at specific intervals to ensure the data is displayed in a certain way on print, I can only have whole pages. The variable is how many pages are printed on each project, which can be anything between 1 and 20 or more. I have a few columns that contain line numbers, and formulae down the entire length of the sheet, so a basic last populated cell search won't work, but the column I'd like to focus on is Col F, which only has blank/empty cells below the last used one in use. Is it possible to have a BeforePrint code find the last populated cell in Col F and simply capture which print page number it is in, and set that as the number of pages to print?
So in summary, I'd like to be able to just hit Print, and the code will automatically set the number of pages to print based on which page contains the last populated cell in Col F.
View 2 Replies
View Related
Jun 10, 2009
There are 20 worksheets in my workbook. For the first ten, I would like to print out the only sheets in which cell E28 = 0. For the last ten, I would like to print out the sheets in which cell T1 = 0. Each sheet has a unique name.
View 9 Replies
View Related
Oct 16, 2009
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
View 10 Replies
View Related
Jul 17, 2014
How do I write a vba code to print active sheet to pdf, auto save in specific folder then mail using outlook
im using 'Nitro PDF Creator'
also id like it to automatically save the pdf as the same file name as the active worksheet and also auto enter the following when opening the email server:-
Address: Cell D18
Subject: Cell D21
Email body:
find attached quotation
Optional installation available on request
View 2 Replies
View Related
Mar 22, 2012
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
View 9 Replies
View Related
Oct 11, 2006
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
View 2 Replies
View Related
Mar 26, 2013
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies
View Related
Oct 15, 2005
I am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.
View 10 Replies
View Related
Sep 24, 2013
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
View 3 Replies
View Related
