Auto Run A Macro Even On Medium Security Setting
May 23, 2007I have my Macro Security setting sets to 'Medium'. How can I auto launch my macro (ex. name - MyMacro) everytime I open the workbook ?
ADVERTISEMENT
Trusted Macro Regardless Of Security Setting
Oct 22, 2009I've been told the latest Excels will allow any workbooks in a certain folder
to run macros as trusted (regardless of security setting?).
Can anyone confirm this please? Is there more to it? What versions are affected? Mine is 2003 so I can't check for this.
Changed Security Setting On Excel Sheet Now Can't Find It
Aug 13, 2012Iv changed the security settings to my name (along with admin) and removed 'everyone'.now when i go into my folder, everyone else's excel sheet is there but mine has gone.
is there a way i can get it back?
Macro Security (saying That The Macro Security Level Is Too High)
Nov 18, 2008I have a sheet that will not let me use macros. I can record them, but when I go to use them it says that the Macro security level is too high. I change it to Medium or Low but it doesn't make a difference.
The same spreadsheet works with Macros on another computer, but not my main one.
Setting Criteria1 / Range In Auto-Filter
Mar 2, 2012Currently (as of Today() = 3/02/2012) in my code my autofiltered range rng is SET to:
? rng.Address
$A$4:$AJ$121
The next
rng.AutoFilter Field:=12, Criteria1:=""
Get The Last, Say 4 Values For The Min, Max And Medium Value
Jun 22, 2006My problems is, and this may be sloved in excel or with VBA. What i have is a number of results, Load and displacement takes at intervals in time. An example of data is below. I will know the min, medium and max numbers for load. What i would like to do is get the last, say 4 values for the min, max and medium value
for example, with the below data,
CloumnA CloumnB
1 (last value) 1
1 (last but one) 1.21
1 (2nd last) 1.2
.
.etc
.
210 (last value) 69.1
210 (last but one) 69
210 (2nd last) 68.9
how can i do this?
Date and time of resultLoadDisplacement
10/06/2006 12:05 10.2
10/06/2006 12:10 9010
10/06/2006 12:15 21050.........
Macro To Delete Vba Code - Macro Security Warning
Feb 7, 2008I have recently grabbed the very helpful "Macro to delete VBA code" from this site, and it's working but with one small problem.
My worksheet runs a lot of code, then deletes all macro code and saves itself.
The problem is the next time i open I still get the macro security warning!
I've checked thoroughly and there is definatley no vba left anywhere.
If I open the document, enable macros, and save it, then open it again, I no longer get the warning.
Are You Sure - Security For Macro
Aug 7, 2007I have a spreadsheet that I regularly have to clear the data and start over on, so i recorded a macro for clearing this rather long sheet with only one cllick.
My problem is that i am not the only person who will use this sheet, if They click the control button by mistake they will clear their work and you cannot undo it. I was wondering if i could make it ask "are you sure" kind of like the save option when closing an unsaved document.
Macro Security
Jun 29, 2006If there is code attached to a worksheet, not necessarily in a macro, does the macro security still have to be low to use it??
View 3 Replies View RelatedXl Macro Cant Email Due To Outlook Security
Jul 3, 2002I've written code into excel that sends workbooks to email recipients. This works fine except for use on one friends computer. Of course it's the friend that needed the code in the first place.
What happens is that when the macro attempts to mail a spreadsheet an outlook popup occurrs warning that a macro is attempting to email a message. And so nothing gets emailed out!
Macro To Compare Security Codes
Jul 18, 2008I have 4 worksheets in a workbook: “choose security”, “download”, “MC” and “Lending”,
In the choose security” worksheet in CELL A2 is an HEX code, i.e. stock code.
2. In MC worksheet is raw data of all holdings related to various p’folios and securities, the information we need from this worksheet is,
a) p’folios, which are in column A,
b) Holdings which is Col B
c) Security code i.e. stock code which is in Col D
I need a macro or a formula to look at what security code is in “choose security” worksheet CELL A2, then look for this security in worksheet “MC” Col D, once matched, copy the data for this security to worksheet “download” and paste in CELL A3, I only need p’folios and holdings to be copied to “download” so data in Col A and B.
Once data has been copied to worksheet “download”, I then need another macro or formula to repeat step 2, but this time the macro will be looking at worksheet “Lending”,
a) P’folios, which are in Col B
b) Security code is in Col D
c) Holdings is in Col H
Once the macro or formula has found a match of security code, it will then copy the data from Col B and H to download worksheet CELL E3.
Macro Security Changing Worksheet
May 13, 2006I have created a workbook. That has 35 worksheets within it. I have created a series of buttons and put in a macro code so that when the user clicks on the button it changes the active worksheet to what they clicked on.
So basically when they click button b it changes to worksheet b and if they click button c it changes to worksheet c, ETC.
The problem I have is that since it is a macro it works fine on my computer but when it is sent to other users, because of security settings on their pcs it will disable the macro [thus the buttons will not work or show up]. I have created a digital trust certificate for it. However it is alot of steps to install this for the basic user. Is there a way to create a button that will do what I want without using a macro code. In that it will be able to go to many different users and wont have to worry about the buttons not working because of security settings?
Macro To Change Security Settings
Aug 6, 2008Is there anyway to change the security settings in Excel 2007 using VB macros? I have tried to record the macro as I change the settings but nothings is recorded.
Basically I have two workbooks, and I want to run one of the macros within workbook 1 from workbook 2. This is straight forward, however why I try to run it, excel says that the macros are disabled in the other workbook, but I know they are not, they are all enabled (bottom option)
I was hoping to find some way of fooling Excel into thinking the macros were enabled by changing the security settings (actually keeping them the same, but making excel think that i've changed them) before I try to the macro from the other sheet. I don't know if i've explained myself very well here, I hope I have, if not let me know and i'll try to go into more detail.
Calculate Weighted Averages Using High, Medium, Low
Dec 31, 2008On another thread I found a solution to creating a weighted average given a pair of columns of numbers but I have column B consisting of values given as High, Medium and Low and the weighted column C of 1, 2 or 3.
How can I use the formula below to accomplish this, or is this maybe not the right way to created a weighted average?
=SUMPRODUCT(B2:B11,C2:C11)
Code To Edit Macro Security Settings
Apr 1, 2008I need a code to change the Macro security settings of the computer where the file is opened to enable macros.
View 9 Replies View RelatedDisplay Macro Security Level Code
Sep 6, 2006Although not a complete novice, I am fairly new to EXCEL/VBA.
Is there a script that can be embedded into an EXCEL workbook that checks the Macro security of the PC, and if set to HIGH, shows a message that states that "Macro security is too high to open this workbook".
With security set to high, Excel will open my w/ book, but not run any of my checks that are set in the module. So a "catch 22" really, I need the macros to run to that it is being opened on an authorised computer etc, but if security is set to HIGH, then they don't run, similarly, if I put a macro in to check the macro setting, it won't run unless the security is set to medium.
IF Function: Range That Should Display 'Heavy', Medium Is Displayed Instead
Jan 26, 2009=IF(('MAIN 3'!N54<=H52),"Light",IF(('MAIN 3'!N54>H52,N54<H54),"Medium",IF(('MAIN 3'!N54>=H54),"Heavy",""))). The first two parts work fine: =IF(('MAIN 3'!N54<=H52),"Light", IF(('MAIN 3'!N54>H52,N54<H54),"Medium", Light and Medium is displayed when I enter the appropriate range but when I enter a range that should display 'Heavy', Medium is displayed instead.
View 2 Replies View RelatedExcel 2007 :: How To Detect Macro Security Level
Jul 24, 2014is it possible through vba code to determine the macro security level of Excel 2007 and inform the user. I tried the code below , it is executed when the workbook is opened, but it doesn't work.The code below is executed only when the macro security level is "Low". My goal is at least to inform , with a msgbox function, to change manually the security level.
Code:
Dim secAutomation As MsoAutomationSecurity
Dim zLevel
As String
secAutomation = Application.AutomationSecurity
Select Case secAutomation
[Code]....
Excel 2007 :: Any Way To Call Security Alert To Enable Macro
Jun 28, 2012I'm trying to find out if there is a way to call the security alert to enable a macro. Let me explain...I was working on a sheet with a macro that I hadn't enabled yet. After working for awhile the option to enable it was gone and I found that I had to close the fine and re-open to enable the macro. I'm wondering if there is a ribbon or short cut icon to put in my access toolbar that will give me the option to enable/disable the macro. Seems strange that in 2003 I could to this, but in 2007 I have to close the file.
View 3 Replies View RelatedMacro To Enable Macro Security
Dec 9, 2008It's possible to add in my code a line that sets the macro security to low?
I have to put a excel file that contains macros in over 50 computers, and set the macro security to low.
It even exists something like this?
Setting Up Deleting Macro
Oct 19, 2013I'm trying to delete both rows of the same data not just one.
item
warehouse
location
PANT
7050
2
A1-05-89
PANT
5051
2
B1-19-19
SHIRT
7050
2
J1-08-67
SHIRT
7051
2
J1-08-67
What i need is if there is a same location delete both rows and i cant figure it out to get it to do both of them not just one row.
Setting Up An Array On A Macro
Jun 24, 2008I need to setup an array to look in 408 or so names and I don't want to have to write ("billy", "beth", ... ) etc - I just want it to scan array A3:A408 instead and unsure how to write the macro to do this.
Sub Echo_Monthly_CSR_June()
Windows("Monthly Macro Insert.xls").Activate
Sheets("CSR Data").Select
Dim MyArray As Variant, x As Long, c As Range
MyArray = Array("A3:A408").Select
For x = 0 To 405
With Workbooks("Monthly Macro Insert.xls").Sheets("Copy & Paste Echo")
Set c = .Cells.Find(What:=MyArray(x), After:=.Range("A1"), LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not c Is Nothing Then..............................
Setting Up Password In Macro
Aug 2, 2008I have set up a form with the following macro with a password. The Macro works fine, but When the user enters the password it appears on the screen. I want the password to be seen as ************ on the screen. Please amend my macro, so that when the user enters the password, it appears as ********** on the screen
Private Sub CommandButton1_Click()
If Me.txtpass.Value "Mike1" Then
MsgBox "Incorrect Password!"
Exit Sub
Else
Me.Label3.Visible = True: Me.Label4.Visible = True
Me.ComboBox1.Visible = True
Me.CommandButton2.Visible = True
Me.ComboBox2.Visible = True
End If
End Sub
VBA- Setting Id Of Textbox In Macro Code
Nov 12, 2008Trying to make a error checking macro (if field is blank, then erro prompt and change textbox backcolour to red). However, I have a lot of text boxes, and my current macro is
View 3 Replies View RelatedPage Setting Print Macro
Aug 18, 2006I have a excel sheet with multiple sheets in it.And I have a VBA macro which split all those sheets into one file each.When I am trying to print one file(SHeet) which has more than 15 columns it is printing in two pages(Width).Is there any code i can use so that when ever i open a file which was split by me and give print command the width should fit to the page and peint.
View 6 Replies View RelatedSetting If Function Argument In Macro
Sep 12, 2006In the code bellow I would like to automate a if function until the 1st emptycell in the row 7 of my spreadsheet.
In my IF function, I would like to refer to a fix cell ("B1") while the other argument is in the same column as the function but two rows bellow.
My problem is that I don't figure out how to refer to a fix cell with the syntax I would like to use t run the macro.
I think it's more clear when you'll see the code
Sub Face2face()
Range("B5").Activate
Do
If ActiveCell.FormulaR1C1="=If(R[2]C>=Range("B2"),Range("B2"),R[2]C)"
ActiveCell.Offset(0, 1).Select
Loop Until IsEmpty(ActiveCell.Offset(-1, 0))
End Sub
Macro Error Setting SeriesCollection
Nov 7, 2006I try to plot an XY graph with a VB macro but I don't manage to select the right name of the active sheet.
Sub plot()
WksName = ActiveSheet.Name
Worksheets(WksName).Activate
Charts.Add
ActiveChart.ChartType = xlXYScatter
ActiveChart.SetSourceData Source:=Sheets(WksName).Range("A11:F12"), PlotBy:= _
xlRows
ActiveChart.SeriesCollection(1).XValues = "=WksName!R5C8:R643C8"
ActiveChart.SeriesCollection(1).Values = "=WksName!R5C9:R643C9"
ActiveChart.SeriesCollection(1).Name = "=""Specular"""
ActiveChart.Location Where:=xlLocationAsObject, Name:=WksName
End Sub
A Macro Setting That Would Cause A Run-time Error 1004
May 6, 2009Is there a setting within excel that could cause a user to get a run-time error 1004? I have a workbook with a macro that adds additional sheets to the workbook when a button is clicked. The thing works fine on my machine and 3 or 4 other machines that I have had guys test it out, but I have a user that it will not work for. He is at a location about 3 hours away so I cant see exactly what he is doing, but he says after he clicks the button he gets a run-time error 1004 that says "Unable to set the PrintQuality property of the Page Setup class". I'm thinking that it is a setting within excel?
View 5 Replies View RelatedSetting Font For A Textbox/Listbox With Macro
Aug 15, 2009How do you set the font for a textbox and or listbox? I have tried:
View 4 Replies View RelatedError Setting Range In Transcribing Macro
Oct 7, 2009Trying to write a macro to transcribe data from columns in Sheet1 to Rows in Sheet2. Assuming there is a blank between each record. I get an error on the "Set Rng1....." line.
View 4 Replies View Related