Setting Criteria1 / Range In Auto-Filter
Mar 2, 2012Currently (as of Today() = 3/02/2012) in my code my autofiltered range rng is SET to:
? rng.Address
$A$4:$AJ$121
The next
rng.AutoFilter Field:=12, Criteria1:=""
Currently (as of Today() = 3/02/2012) in my code my autofiltered range rng is SET to:
? rng.Address
$A$4:$AJ$121
The next
rng.AutoFilter Field:=12, Criteria1:=""
Code:
ActiveSheet.Range("$A$1:$AM$14502").AutoFilter Field:=1, Criteria1:= _ "30/06/2013"
When I run the above on my Worksheet to Filter for Rows not equal to 30/06/13 this works fine
I want amend the Criteria1 to a string that is derived off a value in my worksheet I have done this as below where Range("D8").Value is 30/06/13
It is deleting al my data and not keeping the rows with 30/06/13 in it.
Code:
Dim rng As Range
Dim LastQtrDate As Date
Dim LastQtrDateString As String
LastQtrDate = shtControlTab.Range("D8").Value
LastQtrDateString = "" & LastQtrDate
[Code]...
This error occurs after I wanted to use the Auto-filter function for every row. I used to separate the merged cells that used to be into single cells. After that the compiler reports error. Here is the code:
View 2 Replies View RelatedI want to filter the data: [the data I have In "Sheet1]"
Sub Makro5()
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:="5"
Selection.AutoFilter Field:=2, Criteria1:="6"
Selection.AutoFilter Field:=3, Criteria1:="7"
Selection.AutoFilter Field:=4, Criteria1:="99"
End Sub
and now I want to copy from "Sheet1" to "Sheet2" but only Field:=4, where criteria1:="99"; In "Sheet2" I want to paste my filtered data to:
Range("B1,D1,F1,H1,J1,L1,N1,P1,R1,T1,V1,X1,Z1," & _
"AB1,AD1,AF1,AH1,AJ1,AL1,AN1,AP1,AR1,AT1,AV1,AX1,AZ1," & _
"BB1,BD1,BF1,BH1,BJ1,BL1,BN1,BP1,BR1,BT1,BV1,BX1,BZ1," & _
"CB1,CD1,CF1,CH1,CJ1,CL1,CN1,CP1,CR1,CT1,CV1,CX1,CZ1," & _
"DB1,DD1,DF1,DH1,DJ1,DL1,DN1,DP1,DR1,DT1,DV1,DX1,DZ1," & _
"EB1,ED1,EF1,EH1,EJ1,EL1,EN1,EP1,ER1,ET1,EV1,EX1,EZ1," & _
"FB1,FD1,FF1,FH1,FJ1,FL1,FN1,FP1,FR1,FT1,FV1,FX1,FZ1," & _
"GB1,GD1,GF1,GH1,GJ1,GL1,GN1,GP1,GR1,GT1,GV1,GX1,GZ1," & _
"HB1,HD1,HF1,HH1,HJ1,HL1,HN1,HP1,HR1,HT1,HV1,HX1,HZ1," & _
"IB1,ID1,IF1,IH1,IJ1,IL1,IN1,IP1,IR1,IT1,IV1")
I find it to be a little irritating that I have to remove the autofilter, then reapply it whenever I start entering data into a new column. I want a macro that I can assign to a button so all I need to do is hightlight the range of cells I want to apply the autofilter to, and click the button.
View 2 Replies View RelatedIs there any way witch i can use to make the auto-filter range bigger than 1000 cells?
View 2 Replies View RelatedI have my Macro Security setting sets to 'Medium'. How can I auto launch my macro (ex. name - MyMacro) everytime I open the workbook ?
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
Is there an easier way to use a column FILTER without using the very ugly AUTO FILTER ?
View 9 Replies View RelatedIs there a way to use the auto filter when all cells on a spreadsheet are protected. It doesnt appear to work when cells are protected.
View 9 Replies View RelatedHow do you set the range with whats below? Right now its looking at 4,2 only and if extend to look all the way to 19,2 it will just copy the whole screen. I need it to look at 4,2 and then move to 5,2 and then so on once it has copied all that information to the sheet ...
View 7 Replies View RelatedFor some reason I have a worksheet that won't sort stuff by Autofilter any more. I built it as a customer database but for some reason today I just can't get the names to ascend or descend. there is something simple I can check for, I can post an empety sheet if needed but right now I can't really post a list of all my customers info.
View 5 Replies View RelatedUsing VBA in a code. I was using this same code for another workbook before and it worked fine.
[Code] ...
The filter works, but it is not applied. after the macro is run, I need to click "OK" on the filter for it to apply.
After posting a thread regarding sorting issues with multiple columns (under the thread heading "Bulk Sorting" I have conceded that unless I have a sort filter on every column I will not be able to keep data in respective rows when sorting.
My new plan of attack is to insert an empty row (it will be row 13) and apply auto filter across every column (not what I wanted visually but no other option).
Is there a way that I can do this at row 13 on an almost completed sheet? I may just be dumb but I can't stop the filter applying itself to row 1. If I select the whole of row 13 the auto filter or "right click - apply filter" options aren't available. If not I could start a fresh sheet. Is there a way to copy and paste a large amount of cells with different width columns into a new worksheet?
I have a spreadsheet that i am trying to filter. I have tried auto filter but
it is not working. What I have is a coumn with a part number and then 4
columns with other numbers. I am trying to pull out the part numbers that
have a 1 in any of the other 4 columns. below is a sample of my spreadsheet.
A number 1 may show up in column A for one part number and a number 1 may
show up in column C for another part number. I need to be able to put all of
the part numbers that have 1 in one of those columns together and so on. This
is for cycle counts for inventory so the 4 columns represent the week that
those part numbers need to be counted.
wk wk wk wk part #
1 13 26 39 19080
2 14 27 40 100039
4 16 29 1 101007
I ran into a problem with one of my macros the other day. It processes several data files given to us each week. This week, one of the files had Auto-Filter enabled. I had to manually disable auto-filter, and re-run my macro.
I tried recording this action, but wasn't able to. Is there a way to disable/enable Auto-Filter with VB?
if there is a way to have a running total of the auto filter feature
ie. you have 5 different values constantly being updated, can these totals be shown somewhere? maybe in another cell or on another worksheet
Sub Custom3()
Range("A785:BW1455").AutoFilter Field:=2, Criteria1:="a"
Range("A785:BW1455").AutoFilter Field:=3, Criteria2:Range ("N").value
End Sub
Is Field 2 referring to Column B? So if I want to filter on the 9th row heading (going from left to right), my Field: = 9?
In the example above, the 1st criteria revolves filtering on dates with the goal of exceeding a certain date (i.e. > 1/1/08). Is there a way to reference the cell (which is in another workbook which is already open) in the criteria?
I have a worksheet with 24k rows. Column C Contains the State, Column D contains the city.
Right now I am looking for accounts in chicago and surrounding cities..if I use Autofilter and just look for the city on the drop down..sometimes it isn't there..but if I choose the state (IL) and THEN look at the auto filtered cities..it's there.
Is there a limit to the number of unique values that an auto-filter can show?
I have a spreadsheet created in Excel 2003. All the non-entry cells are locked. When I protected the sheet I ticked the option for the auto filter to work. The problem is when I send the spreadsheet to my user - she uses Excel 2000. The auto-filter buttons do not work for her but they do work for me. Is there anyway round this? I need to have the sheet locked (apart from the entry cells) but I also need the auto filter function. I've attached the spreadsheet I'm talking about. The protection password is set to "password"
View 2 Replies View RelatedHow can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4
[Code] ....
i would like to set a criteria bewteen a ranges. eg If A1 >0 but <100 then .3, Else If A1 >99 but <200 then .6, Else .9. How do i write this in the cell?
View 4 Replies View RelatedThis should be easy ... can't figure it out. If I want a formula that wants to perform an action (NPV, but I don't think that matters) on the cell directly above and the next "X" (say 20 cells/years of cash flow) to the right of it, how can I set it up so that I can copy the formula across as well as change "X".
(Obviously, it's easy to select a 20 cell range and copy it across ... but what if I want the length of the range to by dynamic (ie I want to switch to a 40 year NPV instead of a 20 year)?)
I am trying to set an Array to prompt user with a series of questions and input answers into a specific row. However, I want to skip over certain columns and leave those blank. How would I modify my code to do this?
Code:
Private Sub CommandButton2_Click()
Dim ArrQues() As Variant
Dim ArrInput(2) As Variant
Dim lngLstRow As Long
Dim strPNfromSales As String
ArrQues = Array("Enter the Part Number.", _ "Quantity Being Returned?", _ "What is the Reason for Rejection?")
For b = LBound(ArrQues) To UBound
[Code]...
I want the first two questions to be input into Column B & C, but then the third question to be input into column I.
When I'm using the Macro recorder or even after I've completed a sequence is there a way to change the range so it code always covers the complete range of the data?
View 9 Replies View RelatedI have created a macro to use auto filter with the name specified in the vba code, can I specify a range of cell to do Sutofilter.
View 7 Replies View RelatedI tried using SUBTOTATL but no luck.
As always, I prefer without helper column(s) and/or VBA - but If not - I will, probably, have to compromise.
My data is as follows:
- Column Titles on row 9, columns A - CQ
- Data from Rows 10 - 46
- Totals on Row 47
I have set an Advanced Filter range of A9:CQ46. However, when I use the autofilter, it hides my totals row, row 47. That row is supposed to show the totals for the visible cells above it.
How can we program an auto filter a table linked to a cell. For example I have a table with 4 columns (A9:D20) and the 2nd row of the sheet is the filter item (A2, B2, C2 & D2).
Lets say column A has a list of months, column B has a list of names, column C is sales figure, column D is the customer. How can I filter let say for the total sales of Mr. X in the month of January.
I came across a code like this but I don't know how to apply it to my sheet. Of course this code is referring to a different table and links but I just need to learn how to apply this code to my sheet:
Activesheet.AutoFilterMode = False
Activesheet.Range("D2:D60").AutoFilter 1, Activesheet.Range("A2").value
AutoFilter.xlsx