Auto Run A Macro
Jul 26, 2007
(Brand) New to VB so apologies in advance if this is a simple fix. I have a spreadsheet that monitors truck cycle times. I have it set to update every minute. One of the columns contains date/time info sorted last to first. Every time the first cell in this column updates, I want to run a macro that copies info from adjacent cells to another area of the sheet. I have seen the "byval target as range" posts, but don't really understand what it does, and whatever changes I make I can't get it to run.
View 9 Replies
ADVERTISEMENT
Oct 16, 2009
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
View 10 Replies
View Related
Mar 4, 2014
I am looking for a macro that i can store in my personal.xlsb. what i need is pretty much is something like this
private sub workbook_open
if workbook.name "inventorysummary.csv"
then application.run "personal.xlsb!capacity"
end sub
I only need it to run just for this file and i cannot place it in the file due to it gets replaced every day. Which if it didn't get replaced. I know how to do auto opens when the file stays the same I am just unsure for this.
View 1 Replies
View Related
Mar 19, 2014
Is there a way to add auto complete to this Macro so that when a user starts typing in a cell in column A it auto completes.
[Code]....
View 2 Replies
View Related
Apr 7, 2009
The spreadsheet I'm working on is kinda hard to describe, but I'll try.
It's a finance calculator of sorts that I need done, and it shows me the total cost of various products. Each of these products require different components, and numbers of components, and also these components all cost different prices. So what I have is the following spreadsheet setup:
View 9 Replies
View Related
Feb 2, 2010
I have a macro to run which will clear out all rows and move them corresponding sheets on the same workbook. At the minute i have this macro to run at 21.00 hours everyday. Is it possible to fire this macro to auto run before me closing a workbook so i don;t need to wait and also worksheet is saved with the latest changes
View 3 Replies
View Related
Nov 12, 2012
I am using one spread sheet to store date that gets updated throughout the day and am pulling information form that sheet to another file. I need to save it to get the current data and I don't want to rely on the person entering data to remember to save. The sheet I want to save is called Log.
View 8 Replies
View Related
Dec 4, 2006
Need a macro for the following:
C | D | F (Column)
10 | 100 | Yes (data)
If column F = Yes then
column G = "abc = 10, def fgh = 100"
where 'abc =' is additional text, '10' is C value.
Loop till the last row of F.
Basically, I want to autofill column G with the data derived from column C & D + some text.
View 3 Replies
View Related
Sep 14, 2007
I have a sheet pasted below for reference. I am trying to make a macro that when I type the word "Completed" into "Sheet1" row N then in this sheet pasted (ProductionList) below the corresponding row gets deleted. I hate explaining this stuff. I'm so bad at it.
******** ******************** ************************************************************************>Microsoft Excel - Unique Print Schedule.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA9B9C9D9E9A10B10C10D10E10A11B11C11D11E11A12B12C12D12E12A13B13C13D13E13A14B14C14D14E14A15B15C15D15E15A16B16C16D16E16A17B17C17D17E17A18B18C18D18E18A19B19C19D19E19A20B20C20D20E20A21B21C21D21E21A22B22C22D22E22A23B23C23D23E23A24B24C24D24E24A25B25C25D25E25A26B26C26D26E26=
ABCDEF1*2345678Job*NameTowelQuanitityDate*Due:HandlingPress9GCHS*Tigres1525-23-BKHL759/14/2007Ship*From*Team*Spirit*TowelsB10Crunk*Energy1518-125*WHHC50009/18/2007NoneDONE11Atlanta*Falcons1518-15WHHL500069/18/20076*Post*Pro*To*DonB12Sunstreet*Mortgage1626-30*WHDC3029/18/2007Hook*&*GrommetR13McDonalds*Hacer*Golf*Outing1626-30*WHDC3049/18/2007Hook*&*GrommetR14Arizona*Cardinals1218-13*WHFI670069/20/20076*post*Pro*To*DonR15Michigan*Go*Blue1118-12PMS10910169/20/200710*towels*to*Greg*Cannon*6*to*DonR16Golf*Etc.1626-30WHDC1549/24/2007Hook*&*Grommet.**4*samples*to*sendB17Buffalo*Bills*"Billieve1118-12WHHR600369/26/200736*post*pro*to*Donny*DonB18Wreck*Em*Tech1518-125*WHHC100510/1/2007NoneR19Go*Hogs1518-125*WHHC100510/1/2007NoneR20U*Conn*Huskies1518-125*WHHC100510/3/2007NoneR21Go*Bulldogs1518-125*WHHC150510/3/2007NoneR22Chargers??6800010/8/20070R23Kansas*University*Homecoming1118-13RYFC2501810/30/2007Strike*to*Corey*&*VernR24Go*Aggies1518-125*WHHC50511/1/2007Drop*ShipsR25St.*Paul*USBC1118-16*COLORS1512FlexibleRDDC,*HUDC,*RYDCB26Fire*Antz1118-12WHHR2000PENDINGNoneBProduction List*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Feb 4, 2008
I have a macro that allows me to type numbers in cells and it auto adds to the previous value... what would be nice is if when i hit enter the cell focus stays at the current cell and doesnt move the next cell down... that way if i wanted to enter multiple values into one cell i wouldnt have to touch the arrow keys to get back to the cell
e.g: i enter a value into A1 and hit enter, instead of the box focus moving to A2, it stays at A1
Heres my current
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("DATA")) Is Nothing Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
If Not IsNumeric(Target.Value) Then Exit Sub
Application.EnableEvents = False
Target.Value = Target.Value + oldVal
Application.EnableEvents = True
End Sub
View 9 Replies
View Related
Jun 3, 2008
The following code has been tested on Excel 2003 and Acrobat 8.0 Pro:
' This line of code specifies your directory as well as the cell or range which you want the filename to come from. As you can see, I have a specific cell with the range name "InvNbr" so that the macro knows to pull the filename from there. If you don't want to use a range name, just replace InvNbr with your cell reference, such as C4.
Filename = "C:Folder1SubFolder1" & ActiveSheet.Range("InvNbr").Value & ".pdf"
' This line of code sends the filename characters and the ENTER key to the active application. The "False" statement allows the macro to continue running without waiting for the keys to be processed.
SendKeys Filename & "{ENTER}", False
' This line of code calls the Adobe PDF printer and runs the conversion. To ensure that you replace this code correctly with your own PDF printer, simply record a macro to print to Adobe PDF and then copy and paste it here....
View 9 Replies
View Related
Sep 22, 2008
Sub Custom3()
Range("A785:BW1455").AutoFilter Field:=2, Criteria1:="a"
Range("A785:BW1455").AutoFilter Field:=3, Criteria2:Range ("N").value
End Sub
Is Field 2 referring to Column B? So if I want to filter on the 9th row heading (going from left to right), my Field: = 9?
In the example above, the 1st criteria revolves filtering on dates with the goal of exceeding a certain date (i.e. > 1/1/08). Is there a way to reference the cell (which is in another workbook which is already open) in the criteria?
View 9 Replies
View Related
May 25, 2009
I have a spreadsheet where on one tab, there is a list of user inputs for each item number (i.e. Item 1 - Length A, Height B, Width C; Item 2 - Length D, Height E, Width F etc.) so the user is able to modify the number of items and the specs for each item. On another tab in cell BB8, the user is able to type in the item number and an image of that item is displayed. The user can then print out the image.
My problem is that usually the number of items is very big list and so it is tedious to manually change the item number each time you want to print out a particular image. I want to write a macro that can automatically change the item number and print out the corresponding image (So for example, if there are 10 items, print out all 10 images with a single macro, as opposed to manually changing the item number and pressing print each time).
View 9 Replies
View Related
Aug 20, 2009
I am trying to set up an macro that runs when a workbook opens
I have placed the following code in the This Workbook Object
Private Sub Workbook_Open()
Worksheets("Test").OnEntry = "Every_Update"
With ThisWorkbook
Application.OnTime Now, "'" & .Name & "'!" & .CodeName & ".Workbook_Open2"
End With
End Sub
I am tyring to instruct Excel to run the macro "Every_Update" every time an entry is made in the worksheet "Test". This seems to fuction.
However, I have other code that I am tring to run in a a macro called "Workbook_Open2"
That macro contains functions that are not yet loaded into Excel during the Auto open sequence. I was hoping that by calling the subroutine, it would allow the functions to be enabled. Basically the function that I a trying to get is to open up another excel file and read a cell.
The code above gives me an error - it cannot find "Workbook_Open2" Should this not be in a module?
View 9 Replies
View Related
Sep 14, 2009
my macro simply activates a cell and all i want it to do is to auto fill downwards!
its intended to autofill down for about 100 rows but just cant figure it out!
but keep in mind the cell is always going to change so it cant be fixed
i.e this wont work:
Selection.AutoFill Destination:=Range("C95:C659")
Range("C95:C659").Select
ActiveWindow.SmallScroll Down:=513
because i need it to be autofilled from the CURRENT active cell only!
View 9 Replies
View Related
Oct 23, 2009
I'll insert the code below. Basically I'm taking the sheet titled Old and based on part number then op number, automatically populating the new work center in the new sheet. It runs but seems to be caught in an infinte loop.
Sub DataPopulate()
Dim varOperNo As Variant
Dim varPartNumber As Variant
Dim x As Integer
Dim SFCTimesNew As Worksheet
Dim SFCTimesOld As Worksheet
Dim pnfind As Range
View 9 Replies
View Related
May 10, 2006
I have a spreadsheet of 30 or so tabs, all of identical layout, with columns B to AS used. Each day I have to drag a row down to collect data from various other spreadsheets, on each of the 30 tabs (different data in each tab, but same format), i.e. today I dragged down B216:AS216 down to B217:AS217 for all 30 tabs. I could record a Macro on the first tab and then play it for the remaining 29, but I have to record the Macro each day so it drags down the next row down.
I am after a Macro that will drag down the columns to the current date (which is in column A and is already entered down to the end of the year) on all tabs, so if I left it for 5 days etc, and then ran the Macro, it will drag down 5 rows. But if I had to run it 5 times that wouldn't matter. A button on the first sheet would be brilliant too, meaning I could open it up, click the button, and then all 30 tabs would drag down to todays date.
View 4 Replies
View Related
Aug 12, 2006
i am trying to run a macro automatcially when the workbook opens.
View 9 Replies
View Related
Feb 4, 2008
i want to have a macro which will autosave the worksheet/ book automatically every minute so the user doesnt have to keep clicking file and save.
View 9 Replies
View Related
Dec 20, 2008
I have found some posts about "Auto Saving" and Dave pretty much frowns upon that. But the program I use (via ODBC), for some reason doesn't see the changes I make unless the file is saved. I have it auto-saving right now, but was thinking, maybe it is better to export a copy.
What I would need, is the ability to take my current workbook and export it to a new file (overwriting that same file each time), and do this based on time or (even better) on a change in the data. My current workbook is set to pull from other CSV files, scraping our website, etc., and then I use Excel to format the data the way I want.
It would be cool, if I could export two versions each time too... one that would be like a archive of what the file was like when it changed, the other would be the one that just gets overwritten each time.
Love this site...tons of info...but dang am I not smart at this stuff. Half the time, I don't even get where to put the code...worksheet, module, workbook?
View 6 Replies
View Related
Aug 23, 2012
I have finally got a Marco to run based on the value of a cell changing from 0 to 1 .
However once activated it run continually until Stack full error .
View 7 Replies
View Related
Sep 3, 2012
This auto run macro does not seems to run/repeat itself daily. I can't figure out why am I missing something? My end result should be that these reports run at the times listed on the macro every day 24/7. The spreadsheet will be on a computer that is never off.
VB:
Private Sub Workbook_Open()
Application.OnTime TimeValue("8:00:00"), "AThirdshift"
Application.OnTime TimeValue("8:00:00"), "BThirdshift"
Application.OnTime TimeValue("8:00:00"), "CThirdshift"
[Code] .......
View 1 Replies
View Related
Jan 25, 2013
I have created a macro to use auto filter with the name specified in the vba code, can I specify a range of cell to do Sutofilter.
View 7 Replies
View Related
Apr 25, 2014
Making a macro to work like this:
if each 4th row of each column (A to XFD) contain 1, hide every column that contain 1 at each 4th row..
So, when the result of my formula is 1 on D4, F4, and AB4, then D, F, and AB column would be hidden automatically when I ran the macro..
View 5 Replies
View Related
Feb 15, 2014
How to get an automatic macro to run from my first sheet (sheet 1 of 10).
However, on my first page, users must enter 36 numbers in exact order and then those numbers need to automatically be copied to start at A3 on my following 9 sheets.
View 3 Replies
View Related
Feb 8, 2007
I have 100's of workbooks that have a mispelled word in a cell. Some of the workbooks have more than one sheet. I have written a macro that will correct the mispelling, and now would like to have the macro run automatically everytime I open a workbook, I would like for it to check all the sheets, but if not, then whatever sheet the workbook opens to will be fine. Here is the macro.
Sub mySpelling()
Dim myWord
Range("b22").Select
myWord = ActiveCell
If myWord = "Quanity" Then
ActiveCell.FormulaR1C1 = "Quantity"
End If
End Sub
I have done a search and have seen about "personal.xls", that does not seem to work. Thinking that I will have to add something to XLStart folder but not sure.
View 3 Replies
View Related
Aug 6, 2007
I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Example...
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
View 14 Replies
View Related
Nov 11, 2008
There is a standard Excel macro to add the current date and time to a spreadsheet. But how do you add those to another macro and have them populate the date and time as of when activate the second macro? I have the following code (only the part that is applicable for this question):
View 2 Replies
View Related
Mar 20, 2009
I currently have a macro setup that puts Auto-Sum data in the row below the bottom-most row of data. What code would I need to format this Auto-Sum row with the following parameters automatically...
1. Merge & center F & G in the Auto-Sum row with the text "Totals".
2. Change the row height of the Auto-Sum row to 44 pixels.
3. Center the vertical alignment of the Auto-Sum row.
4. Put the thickest border around the Auto-Sum row in cells A-K.
View 14 Replies
View Related
Aug 27, 2009
I have a working macro where I use a Forms Command Button w/ a Macro that copy/paste specific variables and range in the workbook to a pre-defined PowerPoint template file (in the same directory as the workbook file). See code below: Questions:
1) Is there a better script to reference a value in a cell value in Excel and Paste in PPT template?
2) Is there away to auto scale the copy range from Excel to PPt? Curently I have to manually adjust the height/width parameters.
View 3 Replies
View Related
