How to get an automatic macro to run from my first sheet (sheet 1 of 10).
However, on my first page, users must enter 36 numbers in exact order and then those numbers need to automatically be copied to start at A3 on my following 9 sheets.
I'm looking for a formula that will paste an entire row from sheet 2 into sheet 1 of the same workbook when only 1 cell is typed.
I am trying to come up with a property access log for my guards so when they enter a tag number from(sheet 2 column B) into (sheet1 column D) , it will auto fill sheet1 column C and E with the entries from sheet 2 column A and C.
Can I set up my workbook so that the formula Auto Calculation works on one of the sheets, but the other two sheets only calculate on saves.
I have three sheets in a workbook. 1 of the sheets is used for data entry and there are quick small visual formulas on that sheet that make data entry easier and produce mistake double checks. But the other two sheets are formula intensive and take a few minutes to calculate which is fine considering it only calculates on save. But I need to be able to have the one sheet calculate automatically while these other two are only on save.
Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies View RelatedI get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I am trying to create a transfer of data from one worksheet to another, where Column G is where new data will be entered. I have a macro to sort the data (works great!!), but it is just getting it from one worksheet to another without having formulas in the cells - which can be deleted by my co-workers - to pull the data from one sheet to another.
I do not know if this can be done automatically or not, or if info is updated on one worksheet vs another - if then it will transfer the text.
Example:
(A2)LAST NAME (B2)1ST NAME (C2)RES# (D2)HOUSE (E2)DOB (F2)JOB (G2)SPECIAL
(A3)DOE (B3)JOHN (C3)112233 (D3)1 A2 L (E3)10/10/75 (F3)YES (G3)DR APPT
There are over 300 entries - one row new record. The CommandButton1 works great that I have for compiling and deleting unused rows.
But now I need something to get the data to the blank worksheet to compile data from Column G without formulas in the cells. This was one I found online, tried to adjust it to fit what I need, but I cannot get it to work.
Sub CopyRow(ByRef Target As Range)
Dim DstEnd As Range
Dim DstRng As Range
[Code].....
I have a shared workbook where 5-6 people could be updating the log sheet at any one time. The problem is a I have a macro that I would like to run to update ( cut n paste to different sheets, etc) that doesnt like running when the workbook is shared. What I currently do is have a button that when clicked - changes the document to exclusive, runs the macro, then changes back to shared. I was hoping I could run the macro on an worksheet event? But i'd like it to run only once - Possibly when its first opened for the day by anyone of the users.
View 4 Replies View RelatedI have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies View Related*Inserts an existing worksheet template and places it at the end (or after all) the existing worksheets.
What I would like the macro to also do is:
*Automatically rename the inserted worksheet (via my worksheet template) in sequence to the existing worksheets
Example: So let's say I have 3 existing worksheets titled Sheet1, Sheet2, Sheet3 (that's basically the default naming Excel uses). But would when I insert a new worksheet (via my worksheet template) it is shown as Sheet. And if I insert another one, it would be Sheet (2). So basically it is showing as such:
Sheet1, Sheet2, Sheet3, Sheet, Sheet (2)
What I would like the macro to do is automatically rename those last 2 worksheets (and any subsequent worksheets thereafter) in sequential order. Basically displaying it as such:
Sheet1, Sheet2, Sheet3, Sheet4, Sheet5...(and so on and so forth)
I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.
Here is the part of my code:
[Code] .....
I'm fairly new to macros but somehow i managed to create all the required macros for my project through googling and the like. The problem is that i created my macro enabled excel file in XP and when i transferred it to Windows 7 the auto save to PDF macro stopped working with the Runtime Error '5' Invalid Procedure, call or Argument. The highlighted error is as follows.
ActiveSheet.ExportAsFixedFormat _
Type:=xlTypePDF, _
FileName:="C:WindowsTemp emporaryexam.pdf", _
Quality:=xlQualityStandard, _
IncludeDocProperties:=True, _
IgnorePrintAreas:=False, _
OpenAfterPublish:=True
This auto save is supposed to work when a hyperlink is clicked or when the set time runs out (Working Macro).
I want a macro that will transfer the data of billing report in the data sheet of the excel file billing dec 2011.
View 1 Replies View RelatedI have a macro code for conditional formatting. The first 2 lines of the macro are
Private Sub Worksheet_Change(ByVal Target As Range) ....
I have a workbook where I have a button to add a sheet, this works fine except for a formula that the macro edits on every sheet so we can have a running total quantity for the project. The problems occurs if the user changes the name of the last sheet in the workbook, then adds a sheet then the formula gets a reference error. The sheets are named 1 , 2 ,3 and so on, but it is nice to be able to change tha name of the sheet to the date.
View 3 Replies View RelatedRight now, it pulls a sheet from another workbook, and saves it to this workbook. It works great. My problem is that I want it to keep what it pulls in, and not change when the other workbook changes. The other workbook has a macro that clears its cells every morning, so new info can be entered.
I want the old info that the code below pulled over to stay the same, so that I can keep a running history of what was entered everyday. At the moment, if I run the clear cells macro in the other workbook, it also clears all in this workbook. What needs changed in the code to make it work right?
SampleEOD.xlsm
I'm trying to copy a worksheet from one workbook to another from within a macro.
I tried recording a macro while I did it, but Excel only records the first half within the source workbook:
Sheets("RAP").Select
Sheets("RAP").Copy
The Macro Recorder doesn't show the 2nd half in which I select the destination workbook and paste. And there is no paste method; I can't say
Sheets.paste
How do I paste the sheet into the destination workbook?
I need a macro to copy worksheet "OTP" from workbook " OTP Details" to another workbook "Todays OTP".
View 3 Replies View RelatedI have been able to figure out how to copy a sheet in a workbook and make x amount of copies of it in said workbook.
Now...I have a list of names on a sheet named Roster. The list of names reside in column A2-A181.
I need to figure out how to make a new sheet with one name from the list in Roster and have the tab named after the person on the sheet.
The list is in alphabetical order and the sheets should remain as such.
In A2 of each *new sheet*, there should be a name from the Roster sheet, but never a duplicate name.
I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro
When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction
I'm looking for some guidance on a particular popup box that I am getting when I try to run the code below.
View 2 Replies View RelatedI have 20 excel files each having more that 1000 records, the format and header for all the files are same.
I need to consolidate all these 20 different files into one excel sheet, having only one header row at the top. Since I need to perform this step frequently, I am planning to automate it.
create this macro.
I am trying here is,
I have open workbook with command button, by pressing it it should do followings
Copy Range ("A1 : C20")
Open a closed workbook
Add Sheet with date format
Paste the range in Created sheet in A1 to C20 column.
I am now on my third attempt to perform a fairly basic task of transferring data keyed to a separate log. I originally started with a user form transferring to a separate work book however this was not practical. I then had a values keyed into a worksheet being transferred to a separate workbook however network issues mean this data keeps being lost.
I am now trying to simply transfer data keyed in one worksheet to the next available line in a different worksheet in the same workbook.
Here is my code that I have chopped and mashed together from my previous versions.
The sheet the data is be keyed into is called Key and the sheet where the data is to be sent is called log. I would also like the values in the Key sheet to cleared once transferred:
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheets("Log")
iRow = ws.Cells.Find(What:="*", SearchOrder:=xlRows, _
SearchDirection:=xlPrevious, LookIn:=xlValues).Row + 1
ws.Cells(iRow, 1).Value = Key.Range("E7")
Key.Range("e7").Value=""""
End Sub
I am trying to write a macro that will run another macro (already written) through all the sheets/tabs in a workbook one sheet at a time and will stop once it reaches the last sheet/ tab.
Can you assist me in writing this macro.
I need to save a single sheet to a file (in a workbook of many sheets). I can't use the copy command and then save the new workbook because it truncates the longer info in some cells.
Well this excel workbook has lots of sheets each for a specific region eg, Europe, austin etc and also sheets which have relevant data that gets used in the formula.
Now, say for eg lets considered the sheet called austin.
it does the calculations on the headcount needed for call center.
so the columns refer to a formula called gets() which then calls the erlanc function.
Now the problem here is this gets() function takes a value called calc
and this calc just a cell in one of the sheets called table. Now if I change the headcount value in the austin sheet nothing happens. Then I need to change the value of calc cell say make it to 5 or 6 and hit enter. It starts calulating the values to forecast thye headcount, but it does so for all the sheets . so it is taking a lot of time.
how to get make it run only for one sheet.
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
Any way to bypass the unprotect sheet in a shared work book, this is what i came up with so far
[Code] .....
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
Working with a macro enabled workbook that has many sheets what would be a good code that would save Sheet1 into a new MACRO enabled workbook so that the 'Buttons' (which are linked to macros) on this specific sheet will be the only macros that will be copied to the new workbook as opposed to the rest of the macros that are found in different sheets?
Here is what I g=have:
[Code] ......