Auto Filter Controlled By A Macro

Aug 6, 2007

I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.

Example...

Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...

Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub

What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.

' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub

In doing this i can validate the selection field and just add a search button which then will be perfect!

View 14 Replies


ADVERTISEMENT

Table Filter Controlled By Data Validation Cell?

Jan 26, 2012

I have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.

View 1 Replies View Related

Macro Sequence Controlled By Ribbon Button

Feb 4, 2014

If I have a macro sequenced:

Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub

I adjust the CUI editor to

Code:
onAction="test_1"

I close everything down and save.

I open it up and click the button on the ribbon and it says it can not find the macro?

View 9 Replies View Related

Macro To Change Cell Controlled By Combo Box

Sep 12, 2006

Ive got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.

View 3 Replies View Related

Auto Filter Macro

Sep 22, 2008

Sub Custom3()
Range("A785:BW1455").AutoFilter Field:=2, Criteria1:="a"
Range("A785:BW1455").AutoFilter Field:=3, Criteria2:Range ("N").value
End Sub

Is Field 2 referring to Column B? So if I want to filter on the 9th row heading (going from left to right), my Field: = 9?

In the example above, the 1st criteria revolves filtering on dates with the goal of exceeding a certain date (i.e. > 1/1/08). Is there a way to reference the cell (which is in another workbook which is already open) in the criteria?

View 9 Replies View Related

Create A Macro To Use Auto Filter?

Jan 25, 2013

I have created a macro to use auto filter with the name specified in the vba code, can I specify a range of cell to do Sutofilter.

View 7 Replies View Related

Auto Filter Using Macro On Button

Feb 23, 2012

Auto Filter Using Macro

I have a Spreadsheet with names and other data, my question is, can i somehow Auto Filter the First name with a macro that I can assign to a button, what I would like to do is type the First Name in A1 and in B1 have a button that I can press and it will filter all with the name and other data on the same row I have typed in A1 will only be shown.

View 9 Replies View Related

Visual Basic Auto Filter Macro

Nov 19, 2007

I have a excel file that was created by someone else 7 years ago - I still want the formulas that were created but I have updated the information on the spreadsheet and now the macro will not work

Sub DataSort01()
'
' DataSort01 Macro
' Macro recorded 11/18/00 by Terry Schiesser
'
' Keyboard Shortcut: Ctrl+t
'
Selection.AutoFilter
Selection.AutoFilter Field:=2, Criteria1:=">0", Operator:=xlAnd
End Sub

when I do the ctrl+t it wants to debug I select the debug option and then it goes to the screen above but the "Selection.Autofilter" is highlighted.

View 9 Replies View Related

Macro To Auto Filter And Then Paste Certain Columns To Another Sheet

Jun 11, 2014

I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.

Here is the part of my code:

[Code] .....

View 1 Replies View Related

Add Auto Filter (unique Records) Option To Macro

Dec 22, 2009

I have been modifying a workbook and the original macro will send to the sheet Results once the "Search" button is clicked, but I have found that this macro is displaying duplicate records. Can anyone help me put in an auto filter to find only unique records? My second workaround option is if someone can help me remove the go to/select sheet option from the "Search" macro so that a user will not automatically be sent to the Results tab and will instead hit the "Confirm Category Selection" button (which auto filters before sending the user to the Results tab).

View 12 Replies View Related

Macro To Enable Auto Filter Awaiting User Input?

Jul 21, 2014

I need a macro that simply allows me to open the filter criteria dialog to "contains," then stops, so I can enter the value to be filtered. Macro recorder does not allow me to stop recording at the point the "contains" dialog appears.

View 3 Replies View Related

Controlled Loop That Never Ends

Feb 15, 2009

I am having a with a controlled loop. If the loop is on the last pass and an error occurs, it goes into a never ending loop. Once the error portion of code is excuted, the code resumes to the same line. I'm not sure how to solve this problem. I have attached a sample file with all code if needed.

View 2 Replies View Related

If Then Cells Controlled By Value In Cell

Jun 11, 2014

For a = 11 To 14
b = 10
If Cells(a, b) = 3 Then
ActiveCell.Offset(0, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-2]>0,RC[-2],"""")"
ActiveCell.Offset(2, 0).Range("A1").Select
End If
Next a

question : if i want to start the looping from the cell i am standing at instead of the defined a=11 to 14 , how ?

or

question : if i want to start the looping controlled by the cell value of the present worksheet say the value of a1 is 19 , and b1 is 30 , then it becomes : for a= 19 to 30 ,how

View 2 Replies View Related

Filter Without Auto Filter

Dec 9, 2009

Is there an easier way to use a column FILTER without using the very ugly AUTO FILTER ?

View 9 Replies View Related

Auto Filter

Nov 30, 2007

Is there a way to use the auto filter when all cells on a spreadsheet are protected. It doesnt appear to work when cells are protected.

View 9 Replies View Related

Auto Filter Won't Sort

Mar 18, 2007

For some reason I have a worksheet that won't sort stuff by Autofilter any more. I built it as a customer database but for some reason today I just can't get the names to ascend or descend. there is something simple I can check for, I can post an empety sheet if needed but right now I can't really post a list of all my customers info.

View 5 Replies View Related

Auto Filter Not Applying?

Feb 25, 2013

Using VBA in a code. I was using this same code for another workbook before and it worked fine.

[Code] ...

The filter works, but it is not applied. after the macro is run, I need to click "OK" on the filter for it to apply.

View 7 Replies View Related

Auto Filter On Selected Row

Dec 3, 2009

After posting a thread regarding sorting issues with multiple columns (under the thread heading "Bulk Sorting" I have conceded that unless I have a sort filter on every column I will not be able to keep data in respective rows when sorting.
My new plan of attack is to insert an empty row (it will be row 13) and apply auto filter across every column (not what I wanted visually but no other option).

Is there a way that I can do this at row 13 on an almost completed sheet? I may just be dumb but I can't stop the filter applying itself to row 1. If I select the whole of row 13 the auto filter or "right click - apply filter" options aren't available. If not I could start a fresh sheet. Is there a way to copy and paste a large amount of cells with different width columns into a new worksheet?

View 2 Replies View Related

Auto Filter The Record

Sep 21, 2005

I have a spreadsheet that i am trying to filter. I have tried auto filter but
it is not working. What I have is a coumn with a part number and then 4
columns with other numbers. I am trying to pull out the part numbers that
have a 1 in any of the other 4 columns. below is a sample of my spreadsheet.
A number 1 may show up in column A for one part number and a number 1 may
show up in column C for another part number. I need to be able to put all of
the part numbers that have 1 in one of those columns together and so on. This
is for cycle counts for inventory so the 4 columns represent the week that
those part numbers need to be counted.

wk wk wk wk part #
1 13 26 39 19080
2 14 27 40 100039
4 16 29 1 101007

View 9 Replies View Related

Disabling Auto-Filter In VB?

Mar 26, 2004

I ran into a problem with one of my macros the other day. It processes several data files given to us each week. This week, one of the files had Auto-Filter enabled. I had to manually disable auto-filter, and re-run my macro.

I tried recording this action, but wasn't able to. Is there a way to disable/enable Auto-Filter with VB?

View 8 Replies View Related

Auto Filter Totals

Jun 8, 2007

if there is a way to have a running total of the auto filter feature

ie. you have 5 different values constantly being updated, can these totals be shown somewhere? maybe in another cell or on another worksheet

View 9 Replies View Related

Limit To Auto-Filter

Mar 5, 2009

I have a worksheet with 24k rows. Column C Contains the State, Column D contains the city.

Right now I am looking for accounts in chicago and surrounding cities..if I use Autofilter and just look for the city on the drop down..sometimes it isn't there..but if I choose the state (IL) and THEN look at the auto filtered cities..it's there.

Is there a limit to the number of unique values that an auto-filter can show?

View 9 Replies View Related

Auto Filter Compatibility

Aug 3, 2006

I have a spreadsheet created in Excel 2003. All the non-entry cells are locked. When I protected the sheet I ticked the option for the auto filter to work. The problem is when I send the spreadsheet to my user - she uses Excel 2000. The auto-filter buttons do not work for her but they do work for me. Is there anyway round this? I need to have the sheet locked (apart from the entry cells) but I also need the auto filter function. I've attached the spreadsheet I'm talking about. The protection password is set to "password"

View 2 Replies View Related

Sum According To Auto Filter Non Visible Cells

Aug 9, 2009

I tried using SUBTOTATL but no luck.

As always, I prefer without helper column(s) and/or VBA - but If not - I will, probably, have to compromise.

View 9 Replies View Related

Auto-filter Hiding Totals Row?

Dec 6, 2009

My data is as follows:

- Column Titles on row 9, columns A - CQ
- Data from Rows 10 - 46
- Totals on Row 47

I have set an Advanced Filter range of A9:CQ46. However, when I use the autofilter, it hides my totals row, row 47. That row is supposed to show the totals for the visible cells above it.

View 3 Replies View Related

Link Auto-filter To Different Cell?

Jan 23, 2014

How can we program an auto filter a table linked to a cell. For example I have a table with 4 columns (A9:D20) and the 2nd row of the sheet is the filter item (A2, B2, C2 & D2).

Lets say column A has a list of months, column B has a list of names, column C is sales figure, column D is the customer. How can I filter let say for the total sales of Mr. X in the month of January.

I came across a code like this but I don't know how to apply it to my sheet. Of course this code is referring to a different table and links but I just need to learn how to apply this code to my sheet:

Activesheet.AutoFilterMode = False
Activesheet.Range("D2:D60").AutoFilter 1, Activesheet.Range("A2").value
AutoFilter.xlsx

View 4 Replies View Related

Auto-filter Based On Cell Value

Feb 18, 2014

I have two problems:

1) Eliminating doubles when ranking
2) Auto-filtering based on cell values

The first problem is an issue with my formula I believe (I am using a RANK + COUNTIF-1) formula (Shown in tab #2, column L of the attached document)

The second problem will need a macro, but I am not very strong with VBA. In the attached document, I am looking to be able to filter the table in tab one based on the selections I have included at the top. I was able to filter the table based on # of IDs displayed using a formula. The second filter is looking to only show the values in the table that satisfy the condition that column E must match the filter chosen (cell C3).

For example, of the filter chosen in cell C3 is "Yes", I would like the table to rank and display only those rows with a "Yes" in column E.

Attached: Excel_Help1.xlsx

View 2 Replies View Related

Auto Filter With Copied Data

Feb 25, 2014

I am trying to write a macro that will:

A: copy data in cell A1 from Sheet1
B: Add an auto filter in sheet2 column A = to what was copied in Cell A1 from sheet 1.

View 1 Replies View Related

Auto Filter Paste Error

Aug 26, 2008

I'm running Excel 2003 and I have a workbook with an Auto List in Column G. When I attempt to paste a row of data I get the following message.

The operation is not allowed. the operation is attempting to shift cells in a list on your worksheet.

To work around this, I have to convert the list to a range, copy the data and then reapply the Auto List.

Is there another way to work around this or will I have to create vba code or record a macro?

View 14 Replies View Related

Multiple Criteria Using Auto Filter

Oct 21, 2008

I have a range of data (up to 20,000 cells) that has up to 30 different entries. I need to apply a filter to this data to filter out all but 5 of these.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved