In Sheet1,
C14 = Sheet2!D2
C15 = Sheet2!D3
C16 = Sheet2!D5
What i want to do is to change "D" to "E". Next time i run it, it will change from "E" to "G".
I want a macro to do it, so that I don't have to change it manually one by one. For some reason, when i try to use .formulaR1C1, the reference change, and I couldn't get it to work.
I'm dealing with forecasting invoices. The main column 'BALANCE' has a formula referencing the previous cell and then adding or subtracting invoices (ENTRY). The problem I have is that I'll put values in ENTRY that I expect to come in at some point but as they arrive I need to change the order of the cells. So I'm constantly changing the order and then it changes the formula in BALANCE. I tried absolute cells (and even found a work around way to flow absolute cells by flowing then viewing formulas then using the replace function but that didn't work.
So my formula in BALANCE is:
=$I$173+$E$174-$G$174
but if I move G174 to another cell I'd like to keep the BALANCE formula to stay G174 instead of following the move.
i have the table of holiday days with 7 columns(7 countries).Each column consists of 10(or more rows (holiday days).
I have a formula for calculating start day for a deposit which has to be renewed.
formula is =workdays(end date of deposit,-2,A1:A10).
-2 in formula is because all the trades in the market are traded Today+2days.
A1:A10 is column of holiday days.
This formula calculates the start of deposit excluding weekends,holiday days.
BUT I have more then 7 countries and I would like to have a macro so when in cell F10 I type SWEDEN,my formula automatically use the column with holiday days B1:B10 for sweden.
When I type Finland, the formula uses column C1:C10 with holiday days from Finland respectively.
I'm working on setting up a chart. The formula I'm using for cell B21 is this: =ROUND(F3,0) & " " & IF(E3<F3 ...
View 2 Replies View RelatedI have a 2 columns (A and B) next to each other that is using a Sum formula and other multiplying formulas. They reference 3 cells in a different column (C) to come up up with the answer for A and B. Therefore A1 and B1 reference C1 C2 and C3 (and possibly if want to use in future column D with D1 D2 D3).
Then in A2 and B2 I want to reference from C4, C5, C6
Then in A3 and A4 I want to reference from C7, C78, C9 etc.... and so on...
Instead of retyping formulas for each row in A and B, I want to copy down, but I getting the wrong answer when I do that.
I am therefore assuming I typing the formula wrong. How do I type it correctly so the cell reference changes automatically when I pull down columns A and B?
Formula for Column A: =SUM($G28:$G30)
Forumla for Column B: =($G28*$H28+$G29*$H29+$G30*$H30)/$B17
Therefore next row should be referenced from G31 to G33 and H31 to H33
But when I copy it only adjusts it for 1 reference down.
=CHOOSE(WEEKDAY("1 Jan " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
where C1 = the year 2006. B1 has the month Jan and I want to input that into my formula, so when I change the month, it automatically will change my formula. I tried =CHOOSE(WEEKDAY("1 $B$1 " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
B1 = Jan
C1 = 2006
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use
=COUNTIF("Attendance!C9:Z9", "Present"),
and the next date comes along the formula changes to
=COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I have a massive excel sheet with 300,000 rows and 100+ columns. When reading back through my formulas, it can get very confusing. Example: "=(AZ9*5 + 1)+BH9/2 +(AP9*0.75)" I then have to figure out what each column letter is representing. Instead of this, could I rename a column so I can reference the variable name? Example:
Instead of =CONCATENATE(A4, " ", B4)
have
=CONCATENATE(FirstName4, " ", LastName4)
I am using this formula
=IF($A5="Select","",MAX(INDIRECT(SUBSTITUTE($A5,"/","")&"m1440"&"!d:d")))
It looks for the sheet based on A5
It finds the max number from the sheet in Column D
This is what i would like to do please....
On this found sheet - Column A has dates in this format yyyy.mm.dd
I would like to enter a date in a cell (say for example AA5 on main sheet)
Can the formula above be adapted to:
Look for sheet based on A5
then
Look at date entered in AA5
then
use Vllookup to find row containing date in AA5 (making table range the ENTIRE SHEET found based on A5)
then
Return value from Column D
I have several Excel workbooks that suddenly has converted to numbers for both columns and rows. Sheets that were saved and correct yesterday, upon opening today, are now numbered rather than number and letter. Any of my formulas now reference a RNumber and a number when citing location.
View 3 Replies View RelatedI am using below formula to make cell link i m using below formula in column C
I want to copy this formula to range("C4:C2000"), now I want after 43 row ( in cell C47 =(=INDIRECT("V5")) change the V4 to V5
and
cell C90 = (=INDIRECT("V6"))
cell C133 = (=INDIRECT("V7")).......and continue till C2000,,, i mean after 43 rows it change the V4 ot v5, v6, v7, v8, v9.......
I have a cell which is referencing another (=Sheet2!A1) that and I want excel to update the reference by 50 rows each time (Sheet2!A51) .
View 8 Replies View RelatedI have a set of formula in column C to H. I have set a formula as sheet1+sheet2+ like this for about 24 sheets with different reference of cells. I want to change in the entire range of cells C to H as =sum(sheet1:sheet24!b04). The reference what I have mentioned changes in different cells.
View 9 Replies View RelatedIs there a way to change a cell reference within a formula. ie: If the formula is =A1 (in reference to cell A1) and I wanted a new cell to have the reference =A10. Can I make a formula which was A1+9, and therefore lookup A10.
View 9 Replies View RelatedIs there an easy way to drag all the references to a cell in a formula quickly e.g If i have a formula like this is;
=IF(A1>0, A1+1,A1-1)
and want to drag all the references to the cell A1 to another cell in one go as opposed to one at a time?
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have a file that summarizes data by country and by month but then another file with a yearly summary. I need to pull in the same cell references for each month but using each tab's name: 'Jan' tab, 'Feb' tab etc. The problem is every time I tell it to find/replace the tab name, I have to select the file from its location in a browsing box every time. I have also tried the indirect formula without much luck and because I also had to add all the month summary tabs to the original file to get the indirect formula to work. I would rather keep both files separate.
How do I copy over formulas in the Jan column and change the tab reference to the Feb tab for the Feb column without having to change things 200 times for each countries data?
I was wondering whether there is an easy way to change a formula containing a named range back into it's original cell reference in VB. For example I have a cell saying =cogs2008/revenue2008 and I want to change it back into =A2/A3. Any ideas?
I have a range named as follows in a formula:
BaseCase!$O:$O
I have a data validation from which the user can choose another tab.
So, how do I change the reference above to:
TabName!$O:$O
so that TabName refers to the text string in cell B2 (data val. box)
I tried to use TEXT to no avail. I imagine there is a simple solution, but I am at a loss.
INDIRECT perhaps?
Is there a way to automatically change the column index number in the VLOOKUP formula when copying the formula to columns? For example, when I copy a VLOOKUP formula from column A to column B, the cell references will change, but the column index remains the same. I'd like the column index to be increased by 1.
View 2 Replies View RelatedI want whenever i select any dept in the B column say ID or Design... the value into the D column should change automatically...
say if i select in B5 as ID then D5 value should show me India
******** ******************** ************************************************************************>Microsoft Excel - resource_sheet_11_Dec_07_V2.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDE1Project(Client - Name- Length)Dept.Resource 1-Oct2 3Template 4 5New Course Sample Template ID 6New Course Sample Template ID 7New Course Sample Template DesignDesign Pool 8New Course Sample Template BuildBuild Pool Project Schedule [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
How to use VBA codes to automatically change parts of the formula? Example1:
Change formula "=SUM(A$10:A$100)" into "=SUM(A$10:A$1000)"; Example2: Chage formula.........
I read your reply to the thread below, and used your Worksheet_Calculate routine from it. It only works for the first sheet in my workbook. I have multiple sheets in the workbook, and when I run the routine on an activesheet other than the first sheet in the workbook, it doesnt work.
Is there a way to get this routine to work on a worksheet other than the first one in the book?
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
I'm working on a decision matrix to evaluate different alternative production methods. Before that criteria have to be choosen and weighted against each other. The user would fill out the yellow/ blue cells with (0=less important; 1=equally; 2=more). Then values are added up and put into some kind of ranking.
The example was done by hand, which costs a lot of concentration. I would now like to extend the matrix - do you know how to fill out the grey cells more efficiently?
(Excel 2007, Win7)
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedI'm trying to revise a salary payments workbook that isn't set up so well and I'm struggling with finding a good way to enter payments from an old sheet onto a new sheet. The values (for example) I want to appear on the new sheet are in range C2:AQ2 on the old sheet. Instead of going left-to-right, I want them to appear from top-to-bottom. The first formula I wrote was just a simple:
View 5 Replies View RelatedI'm trying to write a formula that will keep the Column ID static while allowing the Row ID to be reference. Each week my worksheet adds one line and the formula in question is moved one cell to the right and thus the formula cell makes the same move (1, -1). I need the formula to keep the column the same from week to week, while allowing the row to shift downward with the formula. I've attached a sample spreadsheet with the formula I derived. Check out the highlighted formula to familiarize yourself before running.
View 2 Replies View Related
