I am using below formula to make cell link i m using below formula in column C
I want to copy this formula to range("C4:C2000"), now I want after 43 row ( in cell C47 =(=INDIRECT("V5")) change the V4 to V5
and
cell C90 = (=INDIRECT("V6"))
cell C133 = (=INDIRECT("V7")).......and continue till C2000,,, i mean after 43 rows it change the V4 ot v5, v6, v7, v8, v9.......
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedI am copying the entire contents of a worksheet onto a blank worksheet multiple times. The problem occurs with the charts which need updating once copied to reference the new worksheet name. I have tried stepping through each chart and then each SeriesCollection but it seems to fall over part way through.
View 2 Replies View RelatedI have a 2 columns (A and B) next to each other that is using a Sum formula and other multiplying formulas. They reference 3 cells in a different column (C) to come up up with the answer for A and B. Therefore A1 and B1 reference C1 C2 and C3 (and possibly if want to use in future column D with D1 D2 D3).
Then in A2 and B2 I want to reference from C4, C5, C6
Then in A3 and A4 I want to reference from C7, C78, C9 etc.... and so on...
Instead of retyping formulas for each row in A and B, I want to copy down, but I getting the wrong answer when I do that.
I am therefore assuming I typing the formula wrong. How do I type it correctly so the cell reference changes automatically when I pull down columns A and B?
Formula for Column A: =SUM($G28:$G30)
Forumla for Column B: =($G28*$H28+$G29*$H29+$G30*$H30)/$B17
Therefore next row should be referenced from G31 to G33 and H31 to H33
But when I copy it only adjusts it for 1 reference down.
I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:
Copy the cell I have selected
I have a cell which is referencing another (=Sheet2!A1) that and I want excel to update the reference by 50 rows each time (Sheet2!A51) .
View 8 Replies View RelatedI have a set of formula in column C to H. I have set a formula as sheet1+sheet2+ like this for about 24 sheets with different reference of cells. I want to change in the entire range of cells C to H as =sum(sheet1:sheet24!b04). The reference what I have mentioned changes in different cells.
View 9 Replies View RelatedIs there a way to change a cell reference within a formula. ie: If the formula is =A1 (in reference to cell A1) and I wanted a new cell to have the reference =A10. Can I make a formula which was A1+9, and therefore lookup A10.
View 9 Replies View RelatedIs there an easy way to drag all the references to a cell in a formula quickly e.g If i have a formula like this is;
=IF(A1>0, A1+1,A1-1)
and want to drag all the references to the cell A1 to another cell in one go as opposed to one at a time?
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
I have a file that summarizes data by country and by month but then another file with a yearly summary. I need to pull in the same cell references for each month but using each tab's name: 'Jan' tab, 'Feb' tab etc. The problem is every time I tell it to find/replace the tab name, I have to select the file from its location in a browsing box every time. I have also tried the indirect formula without much luck and because I also had to add all the month summary tabs to the original file to get the indirect formula to work. I would rather keep both files separate.
How do I copy over formulas in the Jan column and change the tab reference to the Feb tab for the Feb column without having to change things 200 times for each countries data?
I was wondering whether there is an easy way to change a formula containing a named range back into it's original cell reference in VB. For example I have a cell saying =cogs2008/revenue2008 and I want to change it back into =A2/A3. Any ideas?
I have a range named as follows in a formula:
BaseCase!$O:$O
I have a data validation from which the user can choose another tab.
So, how do I change the reference above to:
TabName!$O:$O
so that TabName refers to the text string in cell B2 (data val. box)
I tried to use TEXT to no avail. I imagine there is a simple solution, but I am at a loss.
INDIRECT perhaps?
In Sheet1,
C14 = Sheet2!D2
C15 = Sheet2!D3
C16 = Sheet2!D5
What i want to do is to change "D" to "E". Next time i run it, it will change from "E" to "G".
I want a macro to do it, so that I don't have to change it manually one by one. For some reason, when i try to use .formulaR1C1, the reference change, and I couldn't get it to work.
I'm dealing with forecasting invoices. The main column 'BALANCE' has a formula referencing the previous cell and then adding or subtracting invoices (ENTRY). The problem I have is that I'll put values in ENTRY that I expect to come in at some point but as they arrive I need to change the order of the cells. So I'm constantly changing the order and then it changes the formula in BALANCE. I tried absolute cells (and even found a work around way to flow absolute cells by flowing then viewing formulas then using the replace function but that didn't work.
So my formula in BALANCE is:
=$I$173+$E$174-$G$174
but if I move G174 to another cell I'd like to keep the BALANCE formula to stay G174 instead of following the move.
i have the table of holiday days with 7 columns(7 countries).Each column consists of 10(or more rows (holiday days).
I have a formula for calculating start day for a deposit which has to be renewed.
formula is =workdays(end date of deposit,-2,A1:A10).
-2 in formula is because all the trades in the market are traded Today+2days.
A1:A10 is column of holiday days.
This formula calculates the start of deposit excluding weekends,holiday days.
BUT I have more then 7 countries and I would like to have a macro so when in cell F10 I type SWEDEN,my formula automatically use the column with holiday days B1:B10 for sweden.
When I type Finland, the formula uses column C1:C10 with holiday days from Finland respectively.
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
I'm working on setting up a chart. The formula I'm using for cell B21 is this: =ROUND(F3,0) & " " & IF(E3<F3 ...
View 2 Replies View Relatedneed to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedIn DB2 I have = DB1. How can I drag this down and for each row I go down, I want to reference one more cell to the left of DB1, so in DB3, I would have DA1, and so on.
View 2 Replies View RelatedI have my inventory based in excel. Each brand has it's own file. Each file has several worksheets with all of the items, prices, etc. on them. When I get a shipment, I fill out the next worksheet in line. This way- I have a record of my inventory and a worksheet for each shipment. It has been working very well. The first worksheet in each file is a summary page that shows me the grand totals, shipping charge, etc. from each filled in worksheet page. the problem is I have to build that summary page for each worksheet I fill in.
I would like a way to tell excel to give the same information as I requested in the previous row, but the next worksheet down.
I would like to copy only the IF Formula without copying the cell reference. Say for example I have a formula shown below:
BEFORE
A1=IF('PW216'!G7>=0.9999,0.999,'PW216'!G7)
AFTER
A2=IF('PW216'!AC7>=0.9999,0.999,'PW216'!AC7)
My formula is =IF('PW216'!G7>=0.9999,0.999,'PW216'!G7) is in Red Font color. I want to copy only the formula but when I paste it, it will as well copy the cell reference.
Currently I have a worksheet which is organized to have two pages on it. I will try to explain, i.e. imagine one page of the worksheet in the hypothetical range of A1:D26, then another page in the range E27:K50. So it is staggered on the same sheet. Is there an easy way to copy the range of E27:K50 onto another worksheet.
Aside from the regular copy and paste, I am having problems because there are formulas in the 2nd range (E27:K50) which loose their references once copied.
i.e the formula SUM(A1:A10) I would like to be SUM('Master List'!A1:A10) on the new sheet. Is there an easier way then going through all the formulas and adding the master list part.
I have the following code which Clears the content of a cell. The next thing I want to have happen is to have another cell equal a formula but make that formula relative to its place. The formula is the following =IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))
I am not sure how to paste it where the row changes depending on where it is pasted. Here is the code that does not work...
Private Sub CommandButton1_Click()
Worksheets("2008 Log").Select
Dim cRow
cRow = ActiveCell.Row '
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Cells(cRow, Range("column_duration").Column).value = "=IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))"
End Sub
As you can see, no matter where I paste it it will always refer to row "F". How can I have it refer to row "cRow"?
I want to copy a formula from Workbook A to Workbook B and have the formula configured with Workbook B's spreadsheet cells, not Workbook A's.
View 2 Replies View RelatedIn my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies View RelatedI am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is:
Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree
Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View Related