I have a spreadsheet which i work on everyday, basically I have a formula which needs to be copied in the second column depending on the range in the first column.
Ex : one worksheet will have A1:A100, the B column should be copied to B1:B100, if the next one has A1:A200 then B column should be copied to B1:B200, how to do this with VBA?
I've data in a sheet (case1) which I would like to paste in a new sheet (case2) in the shown format. Is there any easy way of automating this? I tried recording a macro & tried somehow to automate this task but gave up after a few tries?
View 8 Replies View RelatedI have been working on this macro all day and no matter how many different ways I write it I can't seem to get it to finish correctly without giving me an error message. The error messages are different depending on how I write the macro, so what the message says is not important.
I have attached a sample of my work which contains the macro, but I'll post the code below as well. There are two tabs in the workbook. One contains the data("download") and the other is the template("Blank") per say. I need the macro to create a new worksheet using the template for each line of the data ("download")until it gets to the "finalrow." It names the worksheets the value of D3 currently, but I'd like to figure out how to name the worksheets by C3. c3 contains the names of customers, and is duplicated for each product they have purchased. I'd just like to attach a number after the name if it is a duplicate. i.e. Adam, Adam1, Adam2, Adam3 for all "Adam"s.
Look into the code and see if that makes sense. if not, feel free to ask questions.
I was wondering if there was anyway to automate this process. Say take all the files in this folder copy visible cells on a specific tab and paste them into a new worksheet/model we already have built. They shouldn't be consolidated rather pasted below the next.
View 9 Replies View RelatedI'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I found a template at microsoftofficeonline.com it's just a bracket. I feel it has some underlying functionality, as they have a template in visio as well, but I can't figure it out.
So, what I'd like to do is have a workbook with say 100 worksheets. Each worksheet will have a person's bracket. Each person will write in all their picks. Their will be a master bracket where the actual winners will go, as the results are posted. When the master bracket is updated, Excel will flip through each worksheet, checking to see if the win in the master bracket matches the individual bracket. Points will be awarded or not.
Can that be done? I've also done a google search and can't get anymore help. I know that the web has multitudes of free versions, which I'd use, the only problem is that people would hesitate to register. doing it in excel, on the office system, there's no need to register, your cpu login takes care of authentication.
I'm trying to make alot of graphs(400) and I'm not really sure where to start but here with what I've got so far.
Sub macro2()
Dim x As Long, t As Long, y As Long, z As Long
y = 3
z = 5
x = 4
While x < 1000
With Worksheets("cabernet (2)")
t = Cells(x, 1).Value
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.SetSourceData Source:=Sheets("cabernet (2)").Range("By:Hz"), PlotBy:=xlRows
ActiveChart.Location where:=xlLocationAsObject, Name:="Cabernet (2)"
ActiveWindow.Visible = False
ActiveChart.HasTitle = True
ActiveChart.charttitle.Text = " " & t
Windows("complete Favorite Genes.xls").Activate
y = y + 3
z = z + 3
x = x + 4
End With
Wend
End Sub
I don't really know if putting a variable directly into a range works, so far it doesn't.
As you can tell I need a line graph of the range B3:H5, then the next is the those same columns but 3 rows down, so the next graph is at B6:H8. I'd also like to through in a title here, but I may just be playing with fire. The title is located in column A starting at 4 and corrosponds with each graph, so it too goes is increments of 3, i.e., the first title is at 4 the second at 7 the third at 10. Somebody help me out this isn't working very well at all.
Private Sub Database_Click()
Application. ScreenUpdating = False
masterfile = "S:OfficeMaster File.xls"
Answer = MsgBox("Do You want to export to Final Database?", Buttons:=vbYesNoCancel)
If Answer = vbYes Then
ThisWorkbook.Worksheets(2). Range("q9").Copy
masterfile.Worksheets(1).Range("a4").Paste
ThisWorkbook.Worksheets(2).Range("q9").Copy
masterfile.Worksheets(1).Range("d4").Paste
ThisWorkbook.Worksheets(2).Range("b3").Copy
masterfile.Worksheets(1).Range("b4").Paste
ThisWorkbook.Worksheets(2).Range("b9").Copy
masterfile.Worksheets(1).Range("c4").Paste
ThisWorkbook.Worksheets(2).Range("e9").Copy
masterfile.Worksheets(1).Range("e4").Paste
ThisWorkbook.Worksheets(2).Range("g9").Copy
masterfile.Worksheets(1).Range("f4").Paste
ThisWorkbook.Worksheets(2).Range("i9").Copy
masterfile.Worksheets(1).Range("g4").Paste
End If
End Sub
for some reason, it doesnt work as it said the masterfile.worksheets is not recognized, but as i go to the immediate thingee, i type in ?masterfile, it give me the exact address, i had been working on this thign for hours, and have no idea what i did wrong.
I have a very peculiar problem. Each month I have a set of financial products for which I calculate the IRR values using XIRR, as the cash flows are uneven. Imagine this, Product names in ColumnA, the cashflow dates in B, and the cash flows with transaction types in ColumnC and finall D has amounts in negetive and positive. Each month I add new cashflows for each product as rows.
Manually I scroll down to select the range for XIRR (both date and amount)
Offlate this work has gone really high in terms of values, and manually cacluating XIRR takes hell lot of time for all the products (currently 80 odd)
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I have a large number of sheets with data in the following general format:
x ..... y ............ z etc
A Unique value Unique value
A Unique value Unique value
B Unique value Unique value
B Unique value Unique value
C Unique value Unique value
C Unique value Unique value
D Unique value Unique value
D Unique value Unique value
E Unique value Unique value
E Unique value Unique value
In seperate sheets, I want the following:
x y1 y2
A
B
C
D
E
x z1 z2
A
B
C
D
E
And so on for a number of columns - I always want column "x" with another column, however I want the two values for the same value of x to be next to each other, not above one another.
Just wondering if any one can help me come up with some code to remove some lap time in my document ....
View 14 Replies View RelatedThe attached workbook is a follow up report that gets run every Friday. There are 1092 cells that contain formulas that reference a file that was created on Wednesday of the same week. eg.
View 5 Replies View RelatedI am trying to do is have the code display an input box asking the user to type in the file name, or generate this automatically? to an existing folder in a drive
My master file, imports data from another source (excel file) pastes it in the necessary columns at the moment, however the file is run every Monday so the file name is generic, last week was 10723, this week will become 10724 when the data is run next week,
Can I do what I want to? Via either an inputbox for the file name, or by using something so the file name becomes “107 “ & Weeknum(today()-3)
I have 1 spreadsheet in which I need to calculate the % weight of some numbers. Columns A to G have data I do not need for the calculation.
Column H has the numbers of whose % weight I need to calculate. The problem is that the no. of rows containing the numbers can change from week to week and I am trying to automate the calculation of the % weights.
So I want try to use column G (as a reference) (like go at the bottom of it so I can know how many rows of numbers there are) and then calculate the % weights.
I am trying to use Excel VBA to conduct a transaction automatically.So far,I managed to get all the required input in.Now,I need to click the "Submit" Button.
I was thinking of using the InternetExlorer.Document.Links(x).Title to search for the link of the "Submit" button and then use the .Navigate method to proceed to the link.
But when I wrote and ran the :
InternetExlorer.Document.Links(x).Title
i get the following mesage:
"Run Time Error 98
A property or method cannot include a reference to a private object ,either as an argument or as a return value "
My spreadsheet is linked to a stock data web page using the little documented .iqy function. I have set cell A1 to the web page ticker symbol, so that whenever this cell value is changed the data in the spreadsheet is automatically updated.
My problem is in several parts:
1. Read TickerSymbol.csv file which is comprised of just ticker symbols,
2. Insert (TickerSymbol.csv) symbol 1 into cell A1,
3. Save the results to a file c:XXXSymbol1.csv,
4. Insert (TickerSymbol.csv) symbol 2,
5. repeat, repeat
I have a report which has several tabs of data input which is automated.
There are then several columns of formula which I manually fill down at the minute, is they an easy piece of code to automate this?
The attached example may help, on the tab data source I want to automate the copying down of the formulas in columns D&E.
Can this to be automated by the button on the tab front page?
I have created a workbook consisting of a 'master sheet' (this sheet is a worksheet in itself but also summarizes the totals from the subsequent worksheet) and subsequent work sheets. I wish to be able to add worksheets as needed while having the 'master sheet' still updating as you add sheets.
View 9 Replies View RelatedI've been experimenting with automating saving tabs that we use for billing into a .prn file. It works great on my workstation but when I run it on a coworkers workstation the file gets output to the Windows 7 Documents Library, not the workbook's file path. I want it to Save in the same file path that the workbook is saved in already.
Just to clarify I have many sheet tabs, and these are all saved in the .xlsx file. I was previously clicking one by one and doing save as, other file type, prn... but I've automated that by recording a macro and hacking away at it. specifying the workbooks file path correctly? Here's my code, truncated to just show the name of 2 of the tabs:
VB:
Sub EXPORT_ALL()
'
' EXPORT_ALL Macro
' This Macro saves the sheet then exports all tabs as a PRN.
[Code]...