I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
I'm trying to copy large amounts of data yet excel keeps posting the error message,
View 3 Replies View RelatedI frequently have to copy information from one excel sheet and paste it into another. But when I do this the formatting doesn't carry over. So I have to go to each individual cell that I pasted into and adjust the size of it. How do I copy and paste so that the formatting/cell size is preserved?
View 4 Replies View RelatedI'm trying to paste the column that my code found into the blank cell C18, which may change in the future, but I got an error that I need to select the cell to paste the column to - I'm not getting the code right. Here's what I've tried:
For Each Cell In Sheets("Total Sell Dollars").Range("1:1")
If Cell.Value Like "2014*" Then
BlankRow = Sheets("Total Sell Dollars").Range("C" & Rows.Count).End(xlUp)
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
Sheets("Total Sell Dollars").Select
End If
Next
When I run this:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1).Select.Paste
line gets highlighted and it says:
"Run Time error '424': Object Required"
This is the code that I tried when I got the paste error:
Cell.EntireColumn.Copy Sheets("Total Sell Dollars").Cells(BlankRow + 1)
and the error was: Run-time error '1004'
We can't paste because the Copy area and paste area aren't the same size.
Try one of the following:
Click one cell, then paste.
Select a rectangle that's the same size, then paste.
Once I paste the column that excel found, I want to go to the next column and paste the found column into the cell C19 - which may change in the future and so on until all the found columns with 2014 in them are pasted.
Have a HUGE excel 2007 sheet of over 1500 rows that looks like this:
A1IDS09C1_PEND_COB2345678910IDS15C1_HIST_GATIL111213141516Sheet3
I need to get it to look like this:
A1IDS09C1_PEND_COB2COPY YES SHRLEVEL CHANGE SORTKEYS SORTDEVT SYSDA3BMCSTATS YES UPDATEDB2STATS YES UNLDDN
RU0014CONDEXEC YES UNLOAD RELOAD REDEFINE NO DELETEFILES YES SORTNUM 125DDTYPE WORK ACTIVE YES
DDTYPE SORTWORK ACTIVE YES6DDTYPE LOCPFCPY ACTIVE YES7DSNPAT
[Code] .......
In other words, I need to copy the text in blue so that it is above the text in black and the text in red so that it is below. Then I need the macro to repeat this procedure for each cell that it finds containing text in black. I have already created and run a macro to insert blank lines between each black text entry.
I'm using Excel 2013 on Windows 7.
I have an Excel file which has a macro that sucks in data from a number of separate files (two Excel, a varying number of csv). The macro grabs all the individual files and loads them into one of three worksheets with some formatting, sorting, and structuring on the way. All good so far.
I then need to take two of the worksheets and copy them to a new Workbook which I can send out to some users. So I use the Workbooks.Add method, and use the Selection.Copy on just the data (UsedRange.Rows/Columns.Count to ensure it is only the data) and Selection.PasteSpecial with the xlPasteColumnWidths, xlPasteValues, and xlPasteFormats options to copy the data over. None of the data is filtered. Just straight data.
I would expect the newly added workbook to be smaller than the one with the macros because the one with the macros has two extra sheets that I don't transfer, and the sheets I do transfer are identical.
And that's where it gets weird. The file with the macros and more data is 18.7Mb, but the new one with only two sheets is 24.8Mb. One is .xlsm and the other is .xlsx (because it has no macros).
I've tried opening the new workbook and saving as .xlsm (no material difference to the size) and as .xls (it got even bigger). I've opened the new workbook, gone to the end of the data and deleted all the blank rows and columns, but no effect (because the rows are already empty).
Why would the file with less in it be so much bigger (or bigger at all)?
I have tried to create a macro which prints the results of each heading in a drop down box. The listfill range is from B2 to B5 and the linked cell is B1. When manually recording the macro, i copy the heading from B2 into B1, the drop down list updates which in turn updates the cells which are linked to that, i then print out the page. The same happens when i copy-paste cells B3, B4, & B5 into B1. I then return finish the macro by copying B2 into B1.
But when i run the macro, the copy paste works but the drown down list doesnt update, therefore it doesnt update my linked cells so i acutally end up printing 5 indentical pages with the same info.
Is there anything i can do to get around this?
Macro listed below:
Sub copypasteprint()
Range("B2").Select
Selection.Copy
Range("B2").Select
Application.CutCopyMode = False
Selection.Copy
Range("B1").Select
ActiveSheet.Paste
Range("E5").Select...........
When doing a normal copy and paste of a formula you get 1 cell added to the formula
ie... a1=b1+c1
when dragged and copied to a2 you get a2=b2+c2
Is there a way to make it add more than one cell so that when the first formula is dragged and copied I would get a2=b17+c17
The actual formula I am doing a copy and paste with is:
=IFERROR(CHOOSE($I$2,'YTD & MTD'!D58,'YTD & MTD'!E58,'YTD & MTD'!F58,'YTD & MTD'!G58,'YTD & MTD'!H58,'YTD & MTD'!I58,'YTD & MTD'!J58,'YTD & MTD'!K58,'YTD & MTD'!L58,'YTD & MTD'!M58,'YTD & MTD'!N58,'YTD & MTD'!O58,'YTD & MTD'!C58),"")
I am needing to copy and paste to the next row but want 'YTD & MTD'D58 to change to 'YTD & MTD'74
I have two worksheets, and when the value in one changes I'd like the value in the other to change as well. Pasting a link doesn't work, because on the "Paste to" sheet I've applied conditional formatting, and it doesn't register a change event when it's a pasted link. I tried running a macro to copy the whole column and paste it on a change event, but that didn't alert the conditional formatting to kick in.
The "Paste From" sheet has dropdowns in column C. The "Paste to" sheet has corresponding dropdowns in column F. So, if someone changes the selection in C3 on "Paste From", I'd like F3 on "Paste to" to change.
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
I have a sheet which autofilters according to a validation list in cell E2 using the code.
I have then used subtotal arrays to calculate the mean, median, max, min and total count for whichever values the filter shows.
What I want to do next is have a code which will select each possible option from the validation list (triggering the autofilter) and copy and paste the values from each dependent formula into a new sheet.
Attached File: dummy 1.xlsm
I have a Piece of Code that copys a Row in my Spreadsheet and Pastes it underneath the original Row.
The Problem that I am having is that within the Row it Copys there is a Spinner in it. I want the Spinner to be copied also but the Cell that the Spinner is Linked to Says as the Original Cell, it doesnt move Down with the New Row Pasted in.
Here is the code that i have written to Copy the Row and Paste it down a Row.
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"
See attachment.
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
Somehow my tab names (in 2003) have a very small font size. How do I return the size to normal?
View 5 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I've created a combo box in excel with the macro recorder. This is the code that came back:
Sub test1()
ActiveSheet.DropDowns.Add(1305, 52.5, 242.25, 39).Select
With Selection
.ListFillRange = "$AW$4:$AW$18"
.LinkedCell = "$AX$5"
.DropDownLines = 5
.Display3DShading = False
End With
End Sub
This always results in a default font size of 8 for my list. Can anyone tell me how to modify the code above to change the font size to 14? And how to modify the color of the list.
I am trying to change the font size on my combo box using VBA.
I create the combobox dynamically, so need to be able to change the font too.
This is how I create the combobox, however the .Font.Size = 10 does not work and the default font size is 11.
Code:
With ActiveSheet .OLEObjects.Add(ClassType:="Forms.ComboBox.1", Link:=False, _
DisplayAsIcon:=False, Left:=159.75, Top:=80.25, Width:=75.75, Height:=19.5) _
.Font.Size = 10
.Name = "cmbBaseD"
.OLEObjects("cmbBaseD").ListFillRange = "DynRng"
End With