The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I have copied Row no. 2,4,6 fro this GREEN table and want to paste same date in J and K column (in same row numbers)then how can I do this ?
It should Show like this if I 1 First I filter only Yellow cells 2 then I copy that Filtered cells 3 after that copying that filter cells I did Paste in same rows in J and K column
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales First I filter the data range for " Total Sales" Paste the results with header row to wsDetails
Details - Details Then filter the data again for "N" I would like to paste these results to wsDetails w/o the header
Option Explicit Sub comp_pl_ytd_Totals() Dim wbBook As Workbook Dim wsData As Worksheet Dim wsTotals As Worksheet Dim wsDetails As Worksheet Dim wsExtract As Worksheet Dim rngData As Range Dim rngCrit As Range Dim rngDest As Range Dim arrCrit Dim myRange As Range Dim C As Range Dim lngrows As Long Dim strFormula As String Dim rngCase As Range With Application . ScreenUpdating = False .DisplayAlerts = False .Calculation = xlCalculationManual End With................
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B" WB2 - copy Cell count bottom to top of Column "A" WB1 - Paste into Column "I"
I am trying to create a macro that will take data inputed into a set range in sheet one and go to the appropriate sheet to paste in the data as a value in the right spot. The range on sheet one is A2:I2. The data in cell reference D2 in that range will be the same as the name of the sheet to go to where i want to paste the information as a value.
Then the data in cell reference E2 in that range will be a date, the macro will need to find that date on the sheet it has gone to and paste in the information in the row below it, first inserting a blank row to ensure that any data that has already been inputed is not pasted over but shifted down one row to ensure no data is lost. Then i will require the same information to be pasted into the last 2 sheets simply added a row and inserting the data before returning to sheet 1 and deleting the data entered ready for the next entry to be made.
The process should take information entered in Sheet 1, in this case to make a reservation on a trip, paste it into the relevant trip sheet (D2 cell reference will be a trip code) under the relevant trip date (E2 cell reference will be the date). Then also paste a copy on the second last sheet which will be the Invoice sheet and the last sheet which will be a sales tracking sheet.
I am importing some text files into an excel worksheet. I want to change the format just a little bit. For each date I have 5 rows (pixel: 25, 37, 50, 100, and 200). When I import my data the date is in the same row as my pixel numbers. I want to place the date in another column to the left of these pixel numbers.
Below is an example of my "spreadsheet" The first 5 lines (with date "2008_308.txt" next to each pixel number is what I want it to look like and the next (with date "2008_309.txt" is how it is imported with only one date above the pixel numbers. I could do this manually, but I have many years of data to import. And would like a way to kind of copy/paste these multiple items at the same time. Any ideas? .......
I have a workbook open, and want to copy and paste various items to three different sheets in another workbook.
When it comes to pasting the data however i am getting the error "Run-time error '13': Type Mismatch"
VB: Sub BR_0153() Dim Inv As Workbook, BR As Workbook Dim RR As Worksheet, LH As Worksheet, IP As Worksheet Dim LastRow As Long Set Inv = ActiveWorkbook 'sets current workbook as Inv
1. Copy the xth row and paste it before the yth row
2. Copy the mth column and paste it before the nth column
3. Copy the cell a,b and paste it in he position c,d where x,y,m,n,a,b,c,d are variables, the value of which the user inputs, say in cells A1, A2, A3, A4, A5, A6, A7 and A8 respectively.
In other words, I need to read numbers m and n which are the values of cells A1 and A2, then I need to go to column number m (for instance, if m=4, I go to column D), copy the whole row, go to column number n (for instance, if m=6, I go to column F), and insert the copied column.
Also wondering if VBA provides any way to quickly horizontally and vertially flip copied tables while pasting. While I am aware of the transpose function which swaps rows with columns, I am looking for a way to reverse the order of either the rows or the columns as per my need, without having to copy-paste row-by-row or column-by-column.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat() ' ' CCtosheetwithoutformat Macro
i have issue copying data from a filtered sheet to another sheet. i only want to copy visible cells....ie when there is no data or data after filtering i have: selection. currentregion.copy. this dosent work as when there is no data it still copies my column headings in row A1 across to row r1 and then to next sheet. how do i write code that will only pick up the filtered data starting in first cell...ie after filtering this could be any number. for example i only want to copy data if row 2 and downwards has data
I have the code below which filters and copies columns. My issues is that this filters and copies all data. I would like to filter all this data from another column before running the macro. And for this code to only then filter and copy the already 'manually' filtered data. Does anyone know how I might go about doing this?
Sub sortdescript2() Dim rngData As Range For Each rngData In Range("E4:CR258").Columns rngData.AutoFilter Field:=1, Criteria1:="<>" rngData.Copy rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues rngData.AutoFilter Next
how I can copy top 15 visible values from a specific column in an autofilter, without actually setting the "top 10" values in the macro for that column. So somehow copy the first 15 cells. The code should fit somehwere in this I guess:
Could I put an extra variable by the .paste so it only pastes 15 values. Perhaps behind the copy??? I've tried to put .Cells(15) but that doesn't work either, which is a pitty. I'm clueless here, and couldn't find anything regarding this (without using fixed ranges, ...)
I need the VB code to copy just a portion of a filtered list. I have completed the code to sort and filter the list. I'm having a problem determining how to define the region needed. I have searched the forums and found a few helpful threads but nothing specific. Most show selecting all the columns of the filtered list.
My list is in columns A:AA and begins in row 4 (header row). In my test data, there are 5,900+ records and filtered list is approximately 4,900 records. Since I have sorted the data, the portion of the filtered data I need will always begin in cell D5, be columns D:K, and be the visible rows.
I have a large worksheet, with approx 15 columns of data, which is a straight data dump from a very old sales reporting system - so the whole thing is a mess.
As such, I auto filter the report, and select certain criteria from various columns, which leaves me with just the data I wish to see on screen.
What I then need to do is copy across any visible values (after this filtering) from Column C (missing out row 1, which is headings), into the same row in Column E.
At the moment, this is a manual process, because if you highlight the entire selection of codes in column C, then paste in Column E, due to the filtering, the paste puts the values in all the wrong places.
Is there a way around this - or a macro which will copy the values to the same row but in Column E?
This code was provided this forum. It is so close to what I need. The only difference is that I need the copied lines inserted.
Actually, I needed Destination to pick EndT2 (on Sheet2), then select one row down from it and then insert what was copied... -R-
Sub CopyFilteredRangeNoHeaders() Dim rTable As Range
Set rTable = Sheet1. AutoFilter.Range
Set rTable = rTable.Resize(rTable.Rows.Count - 1) 'Move new range down to start at the fisrt data row. Set rTable = rTable.Offset(1) rTable.Copy Destination:=Range("EndT2")
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria: 1. xyz 2. acb 3. hij
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
I would like to copy a column from a filtered range to notepad. The main steps of this method are these:
1.Copy the original range to a blank range(range1) as text and filter 2.Select the required rows and copy 3.paste the values to A1000 (range2) 4.open notepad and set the filename by a cell value 5.paste the range to notepad 6.delete range1 and range2
Unfortunately, I use macros and vb not so often, so I'm not expert in it. I have found two useful code, but I don't know how can I combine them.
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A") If Cell.Value <> Empty Then i = i + 1 b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b End If Next Cell
I'm trying to do is copy filtered data. I select my column and copy it, filtered, no problem. But then my code bugs out when it tries to copy the next column.
If Sheets("CT Summary"). Cells(4, 6).Value = "P1264" Then
Sheets("Mam Roll-up").Activate
'Copy CEID's.
Range("L4:L134").Select
Selection.SpecialCells (xlCellTypeVisible)
"Selection.SpecialCells (xlCellTypeVisible)" works in the first block, but bugs out on the second.
I have a spreadsheet with 5000 records and i would like to have a macro that can be able to filter by date and copy it to a new workbook.
i have a data validation that indicates dates and once i have selected a date for example "10/10/2013" and all data with that date will copy and paste as value to a new workbook .
