So I haven't seen this error before. It says "Automation error: the object invoked has disconnected from its clients."
I think I know what's causing it but am not sure how to go about solving the problem.
Barring any inefficiences that the code below contains, can someone please tell me what code I should used to fix this error?
Creating a spreadsheet to inventory cups each day. When a macro was invoked do the following:
-unprotect the worksheet
-cut/paste the completed sheet below the current
-bring in the values form the previous day's inventory
-set protection on new spreadsheet to lock the cells
-blank out old values
-reprotect the worksheet
Pretty straightforward and seems to work fine for a few iterations, then crashes with "Run-time error '-2147417848 (80010108)': Automation error. The object invoked has disconnected from its clients.".
As FYI, this code was mostly generated using a record macro session, so no variables involved.
Here is a screenshot of the spreadsheet as it sits now:
spreadsheet.png
Here is the code:
Sub NewDay()
'
' NewDay Macro
' Create new day and copy cup count from previous day[code]....
I created a UserForm (userform1) and added a label to it which essentially just says: "Pick a Colour"...
The other UF controls are added on the fly using the below code...however when I try to add the event to each button I get the Automation Error but I don't really understand how / why... the events are actually added to the VB project ok...
Private Sub UserForm_Initialize()
Dim NewButton As MSForms.CommandButton
Dim ws_i, line As Integer
Dim clr_str As String
For Each ws In ActiveWorkbook.Worksheets
I added a dummy routine for test purposes which is to be invoked on click of UF button control (I have tried placing this code in a standard module, within UF module etc to no avail):
Sub HIDE_WS(clr_id As Long)
MsgBox clr_id
End Sub
So to reiterate -- when I invoke the initialisation of the UF I get the following error:
Automation Error
The object invoked has disonnected from its clients
All events are added for each control.
If I remove the adding of the events I know the UF populates with the correct controls etc...
I receive an automation error, when using this code, the debugger is marking the line with n =...
View 14 Replies View RelatedI developed an Excel application for some users. Everything used to wrok very well until recently. When the click some buttons, the error "Automation Error: Object has disconnected from its clients" appears. Problem is, everything works very well on my PC. We run the same Excel version, same OS but I can't seem to find a solution to this problem. I'd have posted the code I'm running here but I don't know how to use the code tags and I don't want to be banned from this forum.
View 6 Replies View RelatedI am getting an automation error
The project is the create checkboxes out of the tab names in a workbook. After that, create a new workbook with the selections made. It is at the point where I pass the array of sheets to be copied that the error occurs. The only thing I can figure is that my variable curWB is not what I think but I declare it to be the original workbook before that point. All of the code is below.
Another possibility is that this code with some other code sits in the worksheet called index. This sheet is being copied to the new workbook also.
VB:
Private Sub CommandButton2_Click()
Dim oleObj As OLEObject, ole As Object
Dim sheetSelection() As String
[Code]....
I get this error on clicking a button in userform1 to display the userform2 (userform2.show) , i checked with another form and it works .
if i click on button to show userform2 second time , it displays outline of form and on third time it displays the form correctly .
why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.
Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.
I've done quite a bit of research in the past week or so on the topic of solver automation using loops; while there are a few good posts scattered around, i haven't quite found the solution to my problem.
i'm trying to run the solver on a few like-sized datasets contained in one worksheet. i've set up a loop to properly reference the 4 datasets. the solver constraints are in one column on the same worksheet.
the macro runs with no errors, but it doesn't "solve." the parameter cells retain their original values.
i should mention that my macro ran perfectly before i consolidated the 4 separate solver calls into one loop. I got tired of having to type 4 different constraint changes in the code as i was optimizing the solver.
on a similar topic, does anyone know how to call a variable in the FormulaText declaration? If i wanted to step through a defined array of constraints, say [1,2,3], how do i get FormulaText:= variable to work?
Sub Macrosolver()
Dim iteration As Long
Dim i As Integer
i = 8 'start in row 8 at first dataset
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
I'm trying to automate advanced filter but can't get past having just 1 critreria.
I have attached an example spreadsheet where the download dump is on "Data" sheet and the result of the advanced filter is on the "Result" page. I would like, if possible, for the result to come up every time the criteria is put in (they are all data validation lists).
so for example, if i select account code, all those codes come up then select period and the list dwindles down and again for cost centre. Is it possible to do this without using macros. I have found the following code butnot sure what to do with it (sorry).
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies View RelatedSo I went back and reorganized my userforms in the order that they are typically operated. I went in reassigned all the appropriate new userform names where needed. Now when I hit the item to activate the userform I get an "Object Required" error code....? So I went back recopy/paste each activation macro for the userforms and I still get the same error code
View 7 Replies View RelatedI am new to userforms and am trying to make the options in a ComboBox the entries in a list of cells. When I try to show the userform an error appears saying "Run-time error 424: Object Required".
I am only assuming that it is the ComboBox which is causing the error because I made one very similar to this ealier but without the independent ComboBox option. Is my method of assigning the options to the ComboBox correct?
The coding I am using to try to fill the ComboBox is below:
Code:
Private Sub UserForm_Initialize()
Dim n As Integer
With ComboBox1
n = 45
While Cells(n, ActiveCell.Column + 1) ""
.AddItem Cells(n, ActiveCell.Column + 1)
n = n + 1
Wend
End With
End Sub
I have a userform that has a control button that opens another userform that contains a listbox with a range of data. I want to click on an item and press a control button to add it to a textbox on my first userform. I do this via:
View 2 Replies View Relatedi have 15 textboxes in my userform (all with tags).
instead of having 15 seperate sub routines that call on one macro is there a way i can write some code that, on entering any texbox within a form, a specific routine would be called
i tried using the Userform_click sub like so, but with no joy:
Can someone help me to get the code to copy an existing workbook, with all the forms and code that exist with it, to a new workbook with the data from the cells, and name the file with a new name?
View 6 Replies View RelatedI am looking for some code that dynamically (during processing) changes the height of a userform. What I am trying to do is this: I have ten worksheets but only five are being used. I am looking to have a userform with a checkbox for each of the active sheets labeled. I don't want to have to display a form that is basically ten checkboxes with five enabled and five disabled. I want to show only the five active sheets checkboxes with a userform only large enough for the five. If six are active then a userform displaying six checkboxes and a userform large enough for only the six to be displayed.
View 9 Replies View RelatedI have some code that I am using to import the source code of multiple websites, or at least that is the end goal. I currently can make it import one website but i can't find a way to change the website as i loop the line i need to change is this
*The website link won't work, it is a log in only site, but i think there should be an easy fix but since i am only self taught i don't think i understand the basics behind why thimngs work
I'm trying to do some automation of a website that has one of those annoying javascript popup dialog boxes you have to click OK on before you can progress. How can I kill that so that I don't have to manually click on "Ok" so that my macro can keep running?
View 9 Replies View RelatedYou take an input, click a button. This will them create a small HTML table with a text input box and another button.
Sub VisitWebsite()
Dim ie As Object
Dim tcode As String
Dim sURL As String
Set ie = CreateObject("INTERNETEXPLORER.APPLICATION")
sURL = http://sample.jsp
ie.navigate sURL
ie.Visible = True
tcode = "apples"
While ie.busy
DoEvents
Wend
Application.Wait Now() + TimeValue("00:00:03")
For Each ieForm In ie.document.forms
ieForm(1).Value = tcode
ieForm.submit
Set ieForm = Nothing
Exit For
Next
The code ieForm(1).Value = tcode works. The code ieForm.submit also hits submit on the button.
The problem is I cannnot figure out how to access the 2nd button which is generated when you click the 1st button. I have tried every variation of ieForm(1).Value. There appears to be only 3 forms (0, 1, 2). When I try 3 or greater, I get an error.
When I use ieForm(2).Value = "something", the Retrieve button text actually changes name to "something".
I've attached a screen shot of the webpage. I can insert text into the top Track Code box, and click Retrieve.
I can't change the text in the Routing Position field, and I cannot click the "Set" button. Any help would be greatly appreciated. I am still a beginner with VBA and it took me a while just to get it to work with the 1st input box.
The above is a screenshot of the data analysis (regression) I want to automate with vba code. Like all macros, I tried to record first and only got the following
View 3 Replies View RelatedI am trying to create a document that automatically sends an email whenever a field reaches a certain value. I am pulling the data from different worksheets onto a summary worksheet and using the data on the summary sheet as the point at which my code checks to see whether the value is below the minimum required. The summary sheet updates automatically whenever I change the data in one of the other sheets but the email will not send automatically when the summary sheet is updated. When I run the macro individually the email sends, however I need some way of triggering it so that it sends automatically upon the data in the field changing. Can anyone help me with this?
Here is an example of some of the code I am using:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Range("D3"), Target) Is Nothing Then
If IsNumeric(Target.Value) And Target.Value < 1 Then
ANDES1
End If
End If
If Not Application.Intersect(Range("E3"), Target) Is Nothing Then
If IsNumeric(Target.Value) And Target.Value < 1 Then
ANDES2
End If
End If
End Sub
What does this code mean? I can't come up with any listing that includes it.
View 5 Replies View RelatedI am having trouble Stepping Into my VBA Code. The Macro itself is working fine (usually), but whenever I try to run through it step-by-step it creates an error near the beginning of my code. Here's the first few lines of my code.
Code:
Sub JLJ_DataEX()
'
' JLJ_DataEX Macro
' Extracts pertinent data from Joe Lamb Jr. Excel pasted property webpages
'
' Keyboard Shortcut: Ctrl+j
'Disable Alerts & Offscreening
[Code] .........
Within the workbook i have a variable declared as
Public ResultsSheet As String
in the workbookopen event I assign a value
ResultsSheet = "Search Results"
and in the Private Sub CommandButton1_Click()
I attempt to make the hidden sheet visible
Sheets(ResultsSheet).Visible = True
Now this works for eveyone except one person, when it fails with subscript out of range error 9.
If i email the workbook back to myself it all works fine
am using the code posted below and i get an Error code 424.
Dim i As Long
Dim Ans As Variant
Application. ScreenUpdating = False
If Not Intersect(Target, Range("E4:E7")) Is Nothing Then
If (Cells(i, "e").Value) > "0" Then
MsgBox "Calls In Queue " & Ans = ActiveCell.Offset(0, -1).Value
End If
End If
Application.ScreenUpdating = True
End Sub
I have made a simple spreadsheet with different values going down one column. I would like to randomly select any value in that column and have that value show up in another cell on the same spreadsheet. How do I do this?
View 2 Replies View RelatedIn one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.