Excel 2013 :: Automation Error Exception Occurred?
Mar 25, 2014
why a macro that works without a problem in Excel 2010 now crashes Excel 2013. The error produced says 'Automation Error Exception Occurred'. If I place a stop in the code and hold the F8 key down, the code runs perfectly (Excel 2013) but if I run it, it will crash. The code is copying a worksheet into a new workbook, adding 2 more worksheets, saving then emailing the workbook before closing. It goes through the routine about 7 times before crashing (sending only 7 email out). It's something to do with the email because I can bypass that code and it runs that part without a problem.
Our office just upgraded all the computers to Office 2013 and I've got to get this macro running again. I had to email 100 reports one-by-one today and I didn't like it.
View 6 Replies
ADVERTISEMENT
Aug 29, 2004
I'd like to report an obscure bug in Microsoft's MSForms. ListBox support that has had me tearing my hair out for several days. I started getting a totally useless error message everytime I popped up a very simple dialog to select a Vendor from a list (in a ListBox, of course). The (useless) error message was titled "Microsoft Forms" (okay I could have guessed that - not too helpful), and the message (after the typical error icon - exclamation mark in caution sign) was "Exception occurred." (how helpful is that?!?!)
The debugger was not invoked, and the dialog/UserForm was frozen except for the scrollbar on the ListBox, any control clicked on (there were only the ListBox, OK and Cancel buttons) popped up the same error. Even closing the UserForm popped up the error message once before finally closing the UserForm. No breakpoints were triggered in any event handler for any of the controls, including added error event handlers for each control (and the UserForm istelf).
This dialog (or UserForm) had been working perfectly earlier in my development of this project, so I found it very frustrating when I started getting this error. Since I had no debugging clues (other than what I realized when it was finally resolved, with my 20/20 hindsight), I tried many things to deteremine where the problem was. When I copied the form to a new workbook, the problem disappeared, until I started copying in other controls and/or modules or workbook/worksheet procedures. However, I couldn't see anything in these other procedures that was causing the problem and they were all working just fine for themselves......
View 2 Replies
View Related
Mar 20, 2012
Formating Date Issue
--
Excel or Access version:Excel 2010
Computer operating system:Windows XP
Sample data:No sample data
Formula(s) right now:Mar-5-2012
Current result(s):Mar-5-2012
My goal:To convert the above text into a date format.
Error message:Can't format the way I want it.
How error occurred:No error message
Generated in:Excel
View 3 Replies
View Related
Apr 10, 2014
I have a VBA macro for automatically create a word report using data in Access and Excel. The macro is hosted within a Excel document but are using both Word-, Excel and Access objects/dataTtemplates for the creation.
The errors appears what it seems randomly. The macro iterates the same code a few times even in Office 365 but then it crashes. The most common error messages are:
Error 1:
Run-time error '-2147417851 (80010105)':
Automation error : The server threw an exception.
Error 2:
Run-time error '462':
The remote server machine does not exist or is unavailable
Error 3:
This action cannot be completed because the application () is busy. Choose Switch To to activate and correct the problem.
(no options are working, this hang the application)
If I debug usually the error originates from the code where I ether close the workbook template I'm using:
excelWorkbook.Close False
... or when I paste a chart from Excel to the Word report:
wordDocument.ActiveWindow.Selection.PasteSpecial
Even more strange are that sometimes if I continue to run the macro its all working again. This ONLY happens when the client office installation is O365. Office 2013 works just fine. I thought O365 and Office 2013 was fairly equal?
View 1 Replies
View Related
Jun 17, 2013
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
View 9 Replies
View Related
Aug 22, 2012
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies
View Related
Aug 5, 2003
I have a little spreadsheet aplication which ran perfectly in Office 97, but since the move to Windows/Office XP, I get the message:
Solver: An unexpected internal error occurred, or available memory was exhausted.
I'm running a P4 2.26GHz with 512MB RAM.
My code is as follows:
Public Processing_Message As String, Macro_to_Process As String
Public StartTerm As Integer, StopTerm As Integer, StepTerm As Integer
Public ResultsLabelCount As Integer
Public myErrorFound As Boolean
Public rs As Object
Public ctl As Control
View 9 Replies
View Related
Dec 29, 2006
I have a macro that does a solver routine. I have another macro that runs this solver, then copies and pastes new inputs, then runs the solver, then copies the results and pastes them somewhere, then copies new inputs, etc. It is a long process and it worked fine a few days ago. Now when I run it, about 90% of the way through and then excel crashes. The error says:
Solver: An expected internal error occurred, or available memory was exhausted.
What can I do?
View 9 Replies
View Related
Mar 18, 2014
I've got large set of data(Column E) for dates from 2007 to 2013(Column B). Here dates are in chronological order.(Attachement) Now I want to match the data in to dates in Column H. Here dates are in random order. I used =INDEX(E3:E40582; MATCH(H3;B3:B40582; 0)). But it doesn't work.
View 5 Replies
View Related
Jun 29, 2014
I have the below code which was working at work using Excel 2010. We have upgraded to Office 2013 and it no longer works
Error: Compile Error. Cant find Project or Library
It does highlight this : If Right(varFile, 4) = ".xls" Then
Code:
Sub PropertyName_SAVEAS()
Sheets("Menu").Select
Range("I27").Select
Dim varFile As Variant
Dim strFileNameDefault As String
On Error Resume Next
[Code] .......
View 2 Replies
View Related
May 17, 2014
I'm using Excel 2013 and I'm getting an issue in vba I can't figure out. (This is something I've done several dozen time before) But everytime I try to copy a sheet in a workbook,
Sheets("Sheet1").Copy After:=WB.Sheets(WB.Sheets.Count)
I recently copied in this sheet from another workbook, and deleted all of it's formula names, but I can't copy any other sheets now either.
The Run time Error 1004: Copy method of Worksheet Class failed pops up. What is weird is that I put in a msgbox and
MsgBox (WB.Sheets.Count)
returns a "1" though the sheet has about a dozen sheets within it. I've saved the workbook and even saved it as another name.
The sheet I imported has a sheet number of 77 while the previous last sheet was 23, could this be a cause?
View 2 Replies
View Related
Jun 11, 2014
Creating a spreadsheet to inventory cups each day. When a macro was invoked do the following:
-unprotect the worksheet
-cut/paste the completed sheet below the current
-bring in the values form the previous day's inventory
-set protection on new spreadsheet to lock the cells
-blank out old values
-reprotect the worksheet
Pretty straightforward and seems to work fine for a few iterations, then crashes with "Run-time error '-2147417848 (80010108)': Automation error. The object invoked has disconnected from its clients.".
As FYI, this code was mostly generated using a record macro session, so no variables involved.
Here is a screenshot of the spreadsheet as it sits now:
spreadsheet.png
Here is the code:
Sub NewDay()
'
' NewDay Macro
' Create new day and copy cup count from previous day[code]....
View 2 Replies
View Related
Aug 5, 2008
I created a UserForm (userform1) and added a label to it which essentially just says: "Pick a Colour"...
The other UF controls are added on the fly using the below code...however when I try to add the event to each button I get the Automation Error but I don't really understand how / why... the events are actually added to the VB project ok...
Private Sub UserForm_Initialize()
Dim NewButton As MSForms.CommandButton
Dim ws_i, line As Integer
Dim clr_str As String
For Each ws In ActiveWorkbook.Worksheets
I added a dummy routine for test purposes which is to be invoked on click of UF button control (I have tried placing this code in a standard module, within UF module etc to no avail):
Sub HIDE_WS(clr_id As Long)
MsgBox clr_id
End Sub
So to reiterate -- when I invoke the initialisation of the UF I get the following error:
Automation Error
The object invoked has disonnected from its clients
All events are added for each control.
If I remove the adding of the events I know the UF populates with the correct controls etc...
View 9 Replies
View Related
Jun 10, 2009
I receive an automation error, when using this code, the debugger is marking the line with n =...
View 14 Replies
View Related
Jun 25, 2009
So I haven't seen this error before. It says "Automation error: the object invoked has disconnected from its clients."
I think I know what's causing it but am not sure how to go about solving the problem.
Barring any inefficiences that the code below contains, can someone please tell me what code I should used to fix this error?
View 8 Replies
View Related
Jan 18, 2008
I developed an Excel application for some users. Everything used to wrok very well until recently. When the click some buttons, the error "Automation Error: Object has disconnected from its clients" appears. Problem is, everything works very well on my PC. We run the same Excel version, same OS but I can't seem to find a solution to this problem. I'd have posted the code I'm running here but I don't know how to use the code tags and I don't want to be banned from this forum.
View 6 Replies
View Related
Aug 31, 2012
I am getting an automation error
The project is the create checkboxes out of the tab names in a workbook. After that, create a new workbook with the selections made. It is at the point where I pass the array of sheets to be copied that the error occurs. The only thing I can figure is that my variable curWB is not what I think but I declare it to be the original workbook before that point. All of the code is below.
Another possibility is that this code with some other code sits in the worksheet called index. This sheet is being copied to the new workbook also.
VB:
Private Sub CommandButton2_Click()
Dim oleObj As OLEObject, ole As Object
Dim sheetSelection() As String
[Code]....
View 1 Replies
View Related
May 21, 2014
I get this error on clicking a button in userform1 to display the userform2 (userform2.show) , i checked with another form and it works .
if i click on button to show userform2 second time , it displays outline of form and on third time it displays the form correctly .
View 3 Replies
View Related
Nov 5, 2009
I have a file that I update daily. It involves opening the file, going to a drop down menu and selecting 1 of the listed items and pressing a button to run the macro. Once the macro is complete, I then go back to the dropdown menu and select the next line item and press the same button to run the macro on this. I repeat this task 7times.
All the macro does is load a txt file to a third party system.
I am looking to see if it is possible to reduce the time it takes to do this task.
View 10 Replies
View Related
Mar 2, 2014
I am new to excel macros and writing automation code....I work for a company that sells special permits and so far i have written a macro to bring up a pop up box when a permit has expired but i also want to be alerted by email, how can I do this, also is there anyway to stop the macro from running once it finds all of the expired permits? I usually press ctrl + break....
I have attached the file to this post : Book1.xlsm
View 14 Replies
View Related
Sep 24, 2010
I am trying to analyze a web page and would like to search through the contents of a web table. I need to extract text error messages which can be located at various unpredictable rows / columns in the web table.
How can I do this?
View 9 Replies
View Related
Sep 10, 2013
I have an Excel report that I'm wanting to know if it can be automated. Basically it starts off in Access, I have a few queries that run via an Access Macro, once the queries are done there is one query via the macro that exports a file of data to excel. I then have a 2nd excel file that is a pivot table that I refresh from the exported Excel file of data from Access. Once refershed, save it, upload it to a Sharepoint Site and send out an email via Outlook. Basically I'm wanting to know if this can be automated to were it runs at like 6am or something before I even get on my computer. I'm not a vba expert, I can do some basic stuff but what takes most people an hour or so to do would take me a day or so. Also would this be easier to just have the pivot update directly to the Access DB?
View 1 Replies
View Related
Feb 26, 2013
I have been trying for some time to be able to download a file from what I believe to be a FTP site. There are three user input fields which I have been able to identify there names. After these fields are complete there is a button to push which I have also identified it's name.
Once the process of pushing this button is done, an unspecified amount of time must occur for data to be gathered and the option of Open, Save, or Canel appear in a Download window. I would then need to Save and Overwrite an existing file.
No Login or Password is required.
I have been able to automate the open of I.E. and input to the three select fields as well as the necessary button push.
However, I am unable to identify how to automatically save the file into a specified location, with overwrite privileges enabled. Below is my progress
View 9 Replies
View Related
Oct 9, 2013
Any excel formulae to build in into my financial model for tax free period/tax holiday, eg for first 6 years, the project company no ned pay tax? it is best if the formulae can bring flexibility for user to change the no. of years (tax holiday).
View 1 Replies
View Related
Aug 15, 2013
So, I have to export about 7 reports from SAP varying in size, lengths and widths. I slammed together the following code to clean the excel sheets.
I'd like the code to be able to open all the excel workbooks (saved as .csv from SAP), run the code, save the workbooks as XLSX with a specific name. Then run my Access Script to import them in to Access.
So here is the code that cleans the excel. The only problem with it is that sometimes SAP prints out a header so I have to delete may be about the first 15 rows until the actual column headings. It varies. I manually do that before running the script. Then save it manually, then open the next workbook and do it again, etc.
Cleaning Code:
Code:
Sub Sample()
‘combine columns
Application.DisplayAlerts = False
[Code]....
View 9 Replies
View Related
Sep 9, 2009
I have some code that I am using to import the source code of multiple websites, or at least that is the end goal. I currently can make it import one website but i can't find a way to change the website as i loop the line i need to change is this
*The website link won't work, it is a log in only site, but i think there should be an easy fix but since i am only self taught i don't think i understand the basics behind why thimngs work
View 4 Replies
View Related
Apr 15, 2014
Using EXcel 2013, Windows 8
I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc
Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?
Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.
View 2 Replies
View Related
Apr 17, 2006
Does anyone might have a formula that it will list top occurred values? Sample file below.
View 9 Replies
View Related
Mar 6, 2012
A B C D
DATE EMPL1 EMPL2 EMPL3
3/6 NO NO YES
3/5 YES NO NO
3/4 YES YES NO
3/3 NO NO YES
I have a list of dates in column A, and a list of employees who either did or did not make a sale on that date in columns B thru D. What I want to do is automatically count the number of days between their sales for a 6 month period.
View 6 Replies
View Related
Oct 2, 2009
I have code that selects chart source data by searching the header row for dataTyp (in this case the dataTyp will be set to "IMP"). The target header cells look like "IMP 100Hz", "IMP 400Hz", "CAP 100Hz", "CAP 400Hz" etc. recently I inserted an averaging column at the end of each group of data columns. The headings for the new columns look like: "IMP AVG" "CAP AVG" etc. I need to exclude the ...AVG column from the source data selection. Code snip:
View 2 Replies
View Related