Dynamic Userforms :: Code That Changes The Height Of A Userform
May 16, 2008
I am looking for some code that dynamically (during processing) changes the height of a userform. What I am trying to do is this: I have ten worksheets but only five are being used. I am looking to have a userform with a checkbox for each of the active sheets labeled. I don't want to have to display a form that is basically ten checkboxes with five enabled and five disabled. I want to show only the five active sheets checkboxes with a userform only large enough for the five. If six are active then a userform displaying six checkboxes and a userform large enough for only the six to be displayed.
View 9 Replies
ADVERTISEMENT
Jan 16, 2012
I have created a userform where I have a combo box and an options box. I want the combo box to reference a specific list of values. And if the check box is selected, I want the same combo box to reference a different list of values. This is the present syntax I am using. For some reason, The value of the check box does not alter the list in my macro.
Private Sub Userform_Initialize()
If chkHeader.Value = True Then
cmbSort1.Clear
With cmbSort1
.AddItem Range("A1")
.AddItem Range("B1")
.AddItem Range("C1")
[code].....
View 9 Replies
View Related
Mar 27, 2008
what i need to do is display a list of items, with a dropdown box next to each item. the dropdown boxes are identical. for each item in the list (e.g. each musician), the user should be able to select an item from the box ("percussion", "horn", "string").
my problem is that the number of items in the list is not set, so the list of name labels, dropdown boxes, etc needs to be generated dynamically. is it possible to generate a list of labels/dropdown boxes using a loop? (as i understand it, this would involve writing code to write code.)
View 6 Replies
View Related
Jan 8, 2007
I'm using a UserForm.Label to display comments which are of variable length. At the bottom of the UserForm are two CommandButtons. I'd like the gap between the Label text and the CommandButtons to be small (and preferably constant); and the CommandButtons to be at the bottom of the UserForm. This means setting the CommandButton.Top and UserForm.Height as a function of the Label.Height. The crude way I have so far achieved is to use Len(Label.Caption) as the surrogate for Label.Height but it's not very satisfactory due to word-wrap and blank lines.
View 2 Replies
View Related
Jan 9, 2007
I have a userform which has vertical and horizontal scroll bars. I want to set the scroll bar width and height properties to the correct value, regardless of the size of monitor screen used to look at the user form. I'm thought of using the code below in the initiliaze event for the user form:
Me.ScrollHeight = Me.Height
Me.ScrollWidth = Me.Width
However, this does not seem to work. I've tried adding 250 (Me.Height + 250)to each measurement, which works, but gives the user with the larger screen a very big scroll area. I wondered if there was a formula based on the application height, that would allow the scroll height to be perfect for the user form regardless of screen size?
Rico.
PS. I also use the following code to set the user form height on initialize. I don't know if that effects anything.
Me.Height = Application.Height
Me.Width = Application.Width
View 3 Replies
View Related
Dec 30, 2009
I have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.
Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub
I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).
View 2 Replies
View Related
Feb 24, 2009
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
View 14 Replies
View Related
Feb 3, 2010
There is a macro i wrote that assigns buttons to different tasks, and it changes the name of each button to whatever task the user utilizes it for. I would like for the changes to be permanent, and i can do it if i can just keep the information in the userform. So, the most logical solution is to permanently change the names of the buttons in the userform, but this has to be accomplished by the users choice, which means i don't do it through the vbe. How do you change a button's caption permanently through macro?
View 9 Replies
View Related
Dec 21, 2007
How do I write a short piece of code that defines the specific height and width that I want to assign to an existing chart. The code will be added to existing code that I have that formats the chart in other ways. This needs to be able to work with any active chart selected, not a specific named chart.
View 2 Replies
View Related
Apr 23, 2007
When turning on sheet protection, I get an error with the following code that I'm using to make sure rows adjust their height when lines wrap.
Rows.EntireRow.AutoFit
What can be done to eliminate this conflict? All of the cells I want available for editing are unlocked.
View 3 Replies
View Related
Jul 12, 2009
I have a userform that has a control button that opens another userform that contains a listbox with a range of data. I want to click on an item and press a control button to add it to a textbox on my first userform. I do this via:
View 2 Replies
View Related
Dec 16, 2009
i have 15 textboxes in my userform (all with tags).
instead of having 15 seperate sub routines that call on one macro is there a way i can write some code that, on entering any texbox within a form, a specific routine would be called
i tried using the Userform_click sub like so, but with no joy:
View 7 Replies
View Related
Dec 14, 2007
Can someone help me to get the code to copy an existing workbook, with all the forms and code that exist with it, to a new workbook with the data from the cells, and name the file with a new name?
View 6 Replies
View Related
Jun 25, 2009
So I haven't seen this error before. It says "Automation error: the object invoked has disconnected from its clients."
I think I know what's causing it but am not sure how to go about solving the problem.
Barring any inefficiences that the code below contains, can someone please tell me what code I should used to fix this error?
View 8 Replies
View Related
Jul 2, 2014
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
View 4 Replies
View Related
Nov 6, 2009
Enclosed is a copy of a workbook in Excel 2003, in which I copied the VBA from a web site to see how that works. I am not a guru in Excel but always curious to see how things can be achieved to maybe enhance it in the future use. I have tried everything based on my knowledge but did not succeed.
View 5 Replies
View Related
Jul 3, 2004
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
View 6 Replies
View Related
Oct 20, 2011
I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.
=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)
View 2 Replies
View Related
May 22, 2009
I have a userform with 10 rows of data with 8 colums in each row... I am trying to figure out how to dynamically address the object names (ie Textboxes).
Short and simply let's say I have 10 Text boxes named textbox1, textbox2, textbox3, etc
I want to address them in a loop as follows
Private Sub Clear_Fields()
Dim field As Object
For x = 1 To 10
field = "textbox" & LTrim(Str(x))
field.Value = "1"
Next x
End Sub
Obviously I'm missing something here as I get the error Object Variable or With Block Variable not set
View 9 Replies
View Related
Oct 1, 2007
I have a userform to be populated with data from a dynamic table for purposes of showing users their daily stats. The data is populated on the worksheet in the following way- ..............
When the userform is pulled up, it needs to show the following details -
UserName - User1
Workitem 2 : 12
Workitem 3 : 7
As the work items go all the way to 65, I wanted to only show the work items that had actually been worked on by each person - What I am struggling with is how to populate the textboxes on the userform with this data - without getting into an absolute mess of if statements -
If Range(WorkItem1Range).Value <> "" Then
userformStats.WorkItemA= Range("a2").Value..........
View 2 Replies
View Related
Feb 6, 2012
Every thread I see on Google search for creating check boxes on a user form based on worksheet data says to use a list box, but I really want check boxes. Any code that will create, on initialize of the user form, a check box for each item in Import!B2:B (last row), regardless of the number of items? I am only worried about having about 20 max. Usually, it will only be 5 to 10.
I did try the list box, but it doesn't populate the list box.
Code:
Private Sub UserForm2_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
'Set reference to the range of data to be filled
[Code] ..........
View 5 Replies
View Related
Feb 14, 2012
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
View 7 Replies
View Related
Jun 29, 2006
I have three ComboBoxes. I need the choice of the first ComboBox to detirmine what is shown in the second and the choice in the second to detirmine what is shown in the third. The lists will be growing as users add items.
View 2 Replies
View Related
Mar 15, 2007
I have an excel sheet where i have the part number in the Column "A". I have four sets of four columns each which has the details of price for that particular part, currency , lead time and the Vendor Name. Now i want to have an user form where in i can put in the details of a part number and i should get the details of the best vendor in terms of price and lead time Seperately. The best vendor in terms of price is determined by comparing the values in the columns B, F, J & N and The best vendor in terms of leadtime is determined by comparing the values in the columns D, H, L & P. I have also created an user form with out any code just to give you an idea of what i am looking at. So that it can be helpful to you. I just key in the part code and i get the best results for the same.
View 6 Replies
View Related
May 21, 2008
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies
View Related
Aug 9, 2009
I have multiple Userforms with labels etc, all controls are similarily named (so I could do this) and I can refer to the Userform dynamically but the Label caption/Controls don't change, any idea's how to get them working.
View 7 Replies
View Related
Jun 18, 2013
I am trying to populate a listbox in a userform using a dynamic list of data in column Y or worksheet "varhold".
Here is my code:
Code:
Private Sub Userform2_Initialize()
With UserForm2.listbox1
RowSource = ThisWorkbook.Sheets("varhold").Range("offset($y$1,0,0,counta($y:$y),1)")
.BoundColumn = 1
.ColumnHeads = False
.ColumnCount = 3
End With
End Sub
When I run this procedure, the box is blank. There is no list.
View 7 Replies
View Related
Oct 8, 2013
I'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
View 1 Replies
View Related
Aug 21, 2014
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
View 11 Replies
View Related
Jun 22, 2014
It has been a while since I worked with VB and I am struggling with some simple code.
I have an Excel sheet that I am using to track client information on, the client name starts on A3 and the list of clients we are tracking will vary from week to week.
I have values in B3:D3 that I need to auto fill based on the values that I have in column A. For example, if column A goes to row 33 then I want to auto fill B3:D3 down to row 33.
The code that I have now works as band aid, but I need something more dynamic.
I have found some solutions on line but none of them worked on varying lengths, the following is the code that has worked so far.
Sub Autofill()
'
' Autofill Macro
'
Range("B3:D3").Select
Selection.Autofill Destination:=Range("B3:D36")
Range("B3:D36").Select
Range("B3").Select
End Sub
View 3 Replies
View Related
