I am trying to get an average number of Networkdays where specific cell values are true. If the project Status is 'ongoing' or 'overdue' in Sheet2, what is the average Networkdays of the open projects for each project lead for Column C in Sheet1?
Sheet1
Column A
Column B
Column C
Project Lead
Count of Projects
Avg Age of Projects
John
3
[Code] ..........
If Cell equals text than take networkdays and subtract by a number
If cell c = RD then take cell m (is a date 12/3) and add that by network days +18. This should tell me how many days to process this file.
I need a formula to count how many days hours & mins between 2 dates but included in the formula need to ensure it only counts business days.
Column A 02/09/2011 13:00
Column AO 02/09/2011 13:02
I need in Column AP to show 0 00:02
The formula I have tried using is - =IF(AO3="","",AO3-A3) which doesnt work as instead of showing 0 00:02 it shows 1 00:02. I dont want it to count as 1 day just 2 mins.
Once that has been worked out I need to include WORKDAYS formula to only count working days. I have created the list on 'Controls' Tab Column A10:A47.
merge these together to create the one formula?
I am trying to display the number of network days ( Mon - Fri) from start to finish in a colour format
I have got so far with a spredsheet which is shown in table 1.
On table 2, I have shown what I would like to happen but I am baffled by what formula / conditional formatting is required.
Is it possible to create a dynamic chart, where "networkdays" is incorporated? You will in other words have a start day and an end day, and the chart will be drawn of the periods in between.
View 1 Replies View RelatedI'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
I have following data
Column A Name of the company
Column B Date
Column C Day
Column D Week of the Year
Column E High Price
Column F Low Price
My requirement is I need the average high price for the first three days of the week i.e Mon, Tue, Wed in Column I and average Low Price for the remaining days is Thu, Fri, Sat , Sun in Column J.
If in some case any day is missing then average high / Low price for the next two days is to be calculated.
I have a spreadsheet with dates running down column J, and a number running down column K. I want to average the numbers in column K for all the rows that are less than 30 days old.
I have a formula for determining if a date is less than a month old:
=IF(DATEDIF(J2,TODAY(),"d")<31,TRUE,FALSE)
How can I translate that into averaging a range?
I'm using Excel 2003
I would like to find the average number of days events take from start to finish.
My data is in 3 columns:
EventName StartDate EndDate
I have a ton of EventNames, each of which have a StartDate. But I want to calculate the average days to complete only for those EventNames that have EndDates.
So, if a cell in the column EndDate is greater than zero, then take that cell, subtract it from the corresponding cell in the StartDate column; Add all of them together and divide by the count of those rows in the EndDate column that have a value.
How do I put this in excel terms? ....
I want to keep track of housekeeping attendants' average productivity of rooms cleaned per day/shift for the last 10 days worked.
I need a formula which will give me an average of the 10 most recent cells with a value (0 should be counted).
I also want to have each month in a separate tab, and for the formula described above to average between two tabs should the 10 days cross-over.
I need to calculate the average amount of days it is taking for files to be processed. Here is the example I have.
Assuming that B1=0 and C1=1 (in the # of days row)
# of Days 0123456789101112131415Total Files
File Count011712113203000000049
I have a worksheet containing 5 columns. A start and end date, a number of days between these dates, the quarter number of the start date (i.e. 1 to 4) and then the year.
I want to calculate the average number of days per quarter so an average of days in column C, based on the details in column D and E.
I need a formula to determine the average number of days between sales transactions for each item in inventory. There are several hundred different item numbers with thousands of transactions.
I have attached an example of what I'm looking for. I've toyed around with Average and If functions but can't seem to get it right.
Avg Number of Days - Excel Help.xlsx
My sheet looks like this - example:
ID Dates CombinedAverageDaysFromID
0001 2012-02-01 ?
0001 2013-08-10
0001 2013-10-10
0402 2011-01-02 ?
0402 2013-01-05
0402 2013-01-22
0003 2009-02-04 ?
0003 2009-12-04
0003 2010-01-04
0003 2010-03-03
0003 2010-08-02
0003 2012-04-04
0003 2013-01-05
0003 2013-10-03
I need to calculate the average days between the dates for each ID? How do I do this?
I'm trying to complete an excel project for work that keep track of orders from several systems as they come in. Every time I get a new order I put the name of the part ordered in column B4:B5000 and have it set to automatically datestamp that days date in column D4:D5000. The problem I'm running into is that on a separate sheet I want to keep track of the average time between orders while also skipping any blank cells and returning a 0 instead of a div/0 error if the sheet has no orders. For Instance:
Widgets
100
10/15/14
Sprockets
44
10/20/14
Cogs
60
10/25/14
The answer I would be looking for here should be 5 skipping over the blank row. I've scoured the net and tried numerous formula but nothing seems to work.
These functions are returning the wrong answer of zero in col GJ , I have put correct answers into col GO
They are looking at the dates in cols FP to FR , then averaging all margins
I'm working on building a workbook to track sales progress, and I'd like to perform an analysis on some of the data with regards to sales efficiency.
To simplify:
Column A = Initial Contact Date (mm/dd/yyyy)
Column B = Close Date (mm/dd/yyyy)
As an example, I would like to calculate the average number of days between the Initial Contact Date and the Close Date to calculate the average number of days in the prospecting cycle. Basically, the formula should function as AVERAGE((B1-A1)+(B2-A2)+(B3-A3)...) and so on for the entire column.
I know one solution would be to insert a new column that performs the subtraction between the two dates, and then I could AVERAGE this new column. However, I want to perform similar calculations to analyze the time period between other key milestones in the prospecting cycle - rather than have a lot of extra columns in my sheet, I was wondering if there's some type of array formula that will calculate what I need.
I have a file that's almost 3000 rows of data I have attached a test file for the purpose of this request. I am trying to figure out the average days overdue per department whose due dates have not already passed.test (1).xlsx
View 2 Replies View RelatedI have a workbook with two sheets. The first has a list of job positions open, columns designated to stages in the employment process and in these columns, my staff enter the dates that they completed a particular stage.
"Position | Date Opened | Stage 1 | Stage 2 | Stage 3 | Stage 4"
Pos 1 | 01/01/2014 |02/01/14|03/01/14|07/01/14|09/01/14
This has a great number of entries and they are increasing and decreasing every day depening on the amount of jobs available.
On the second sheet, I am trying to set up a table which shows the average working days it is taking to complete each stage, divided into the months in which the job position was opened (i.e. for positions opened in january, the average completion working days for stage 1 was X amount of days etc...)
I have tried using =IF(AND(Logical, Logical),TRUE,FALSE) but this doesn't return any info as the logicals will always be false. I tried the OR function, but that requires only one of the criteria to be true to return a value. What I need is for the formula to return a number of days between two dates, ONLY if the opened date falls in one month.
Using Excel 2010.
I am trying to come up with a formula that will return a total average from two columns of dates with criteria. The range will need to cover an entire column as my data is continuously growing and the criteria would have to limit the start date to each month. I have tried
=AVERAGEIFS(DAYS360(A:A,B:B),A:A,">5/1/2012",A:A,"5/1/2012",A:A,"
Excel 2010 Higher than past average formula?
Im using Excel 2010 and want to make a formula that will High light the number when it exceeds the past 30 days average. My information is listed vertically in row F..
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
View 4 Replies View RelatedIf a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View Relatedhow to denote a cell as blank? I'm trying to do an IF formula for if the cell is blank.. Actually it would also work if the formula reads if the cell was NOT blank. Either one would work I just can't figure out the name of an empty cell. So I'm looking for this with the right word in the formula. =if(A1="blankcell",true,false)
View 2 Replies View RelatedI have one tiny qs which I hope someone can answer for me.
I need to allow a user to see a dropdown list (with options) only when the previous cell has the word "complete".
For example, cell B1 can have:
On going
Complete
Blank
If B1 has complete then I want the user to be able to select a number from a drop down list in C1 otherwise I want it to say "wait" or if its Blank to be [Blank].
I tried the Validation > Custom and put in
=IF(B1"Complete","Wait",OptionsList)
Where OptionsList is a defined list of 5->1 but this lot didnt work. I tried similar things in conditional formating but nothing again.
If the result of cell B1 is true then YES if not NO?
I know I can use the formula: =IF(B1="Yes","YES","NO") but I'm looking for the TRUE or FALSE result.
Sheet1
AB110Yes2 3 NO
Spreadsheet FormulasCellFormulaB1=IF(A1>5,"Yes","No")B3=IF(B1=TRUE,"YES","NO")
Excel tables to the web >> Excel Jeanie HTML 4
I have a worksheet with a cell range where the cells can be either logical TRUE or FALSE as a result of recalculations elswhere in the sheet. Only one cell in the range can ever be TRUE at any given time. For much of the time all cells in the range will have the status FALSE Each cell in the range has the same relative logical formula linking to values in other cells in the worksheet I need an event driven macro to find and move to any cell in the defined range if it changes status to TRUE No action is required when the status of the cell changes back to FALSE from TRUE
View 2 Replies View Related