If the result of cell B1 is true then YES if not NO?
I know I can use the formula: =IF(B1="Yes","YES","NO") but I'm looking for the TRUE or FALSE result.
Sheet1
AB110Yes2 3 NO
Spreadsheet FormulasCellFormulaB1=IF(A1>5,"Yes","No")B3=IF(B1=TRUE,"YES","NO")
Excel tables to the web >> Excel Jeanie HTML 4
Is there a simple solution, by changing something in the button properties? My current code below allows data from a userform to goto specific sheets and cells. Currently my option button named winbutton if true will display "true" in cell. i need it to be numerical value "1".
View 3 Replies View RelatedIs it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???
Here is an example...
In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:
=IF(B1>0;((A1)*(B1)*0.15);0)
At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
I have a formula that I'm trying to utilize VLookup to determine a specific bonus. The issue I'm having is when looking for the closes match, it is returning the value below where it should because it's rounding down. For example, the string I have reads:
=VLOOKUP(S5,'Rep Daily'!A1:B61,2,TRUE)
The value it's defining is 17.7485, so it's returning the bonus for 17.5 instead of 17.75. Even when I use the =Roundup function, it's showing 17.75 in the cell but the actual value of the cell is 17.7485 so VLookup is returning the lower of the two values.
Is there a way to copy a formula result as the actual value and not the formula,
I can do copy and paste using "value" option but would like an automated formula or code option if possible.
In the example, D4 copies C4, would like D4 to show "AB" and not the formula "=C4"
I want to run a macro if the result of an IF function is true.
E.g. cell J55 contains =IF(H55>I55,"Goodbye","")
H55 contains =NOW()
I55 contains =DATE(2012,12,31)
Now by changing the dates etc. it prints Goodbye.... simple enough, but what I want is for it to run a macro that selects a range from the previous year's figures and simply changes the fill colour on the range. The macro for this also works fine.
I've tried using the worksheetfunction.sumif route and couldn't seem to get the syntax correct. I'd prefer the worksheetfunction route, as I don't need the formula stored, but it would be great to have both of these pieces of code for reference online - I scoured Google, and the examples I found were pretty weak.
I've recorded the macro (hence the R1C1 references in the second example) and had it work perfectly, but when I replaced row references with my variables, it went back to displaying "TRUE." I'm including all the code here.
Variables:
expr = 3 to 38 (For loop)
startrow = the starting row for the reference data
endrow = the ending row for the reference data
thresh = minimum threshold (a number)
Syntax error here:
I have a worksheet called "Raw Data" where in columns J, I and G contain values. I would like to write a formula whereby if all 3 conditions are met, it will count the number of values found in column C.
I've tried to write an IF statement but it just returns FALSE, despite the result being true. Need the right combination of IF/AND statements that would do this?
=IF(AND('Raw Data'!$J:$J="Maintenance",'Raw Data'!$I:$I="Open",'Raw Data'!$G:$G="1-2008"),COUNT('Raw Data'!$C:$C)). I've tried to attach the workbook, but there's a problem with uploading attachments I think. Sorry if my explanation is unclear.
I am new in Excel VBA and im trying to find a way to get back a result "True" or "False" when I have password, wich must consist of 6 letter, one upper case letter and a number must be in it. When this word consist of 6 letters and has a uppercase letter and number the result is True and this will be written into the cell next to the cell where the password is.
View 2 Replies View RelatedI am trying to create a formula to count the number of time the word "NEW" appears in one column, provided the result of another column gives a certain answer. Sample of my problem and question in detail on attached.
View 2 Replies View RelatedI've got a formula that has numerous nested IF statement and am trying to get the true result to be the first of a given month of the current year. Here's my formula:
Code:
=IF(Setup!$B$3="X","1/1",IF(Setup!$C$3="X","2/1",IF(Setup!$D$3="X","3/1",IF(Setup!$E$3="X","4/1",
IF(Setup!$F$3="X","5/1",IF(Setup!$G$3="X","6/1",IF(Setup!$H$3="X","7/1",IF(Setup!$I$3="X","8/1",
IF(Setup!$J$3="X","9/1",IF(Setup!$K$3="X","10/1",IF(Setup!$L$3="X","11/1",IF(Setup!$M$3="X","12/1",""))))))))))))
Everything works, save that the cell becomes 1/1 with no year at all. I've messed around a bit with TEXT and various DATE/MONTH/YEAR functions on this one, but can't seem to get it correct.
I am trying to write a formula using If statement to output the result "True".
I have 4 columns (P3, T3, AD3, AK3) that store a value of either "Yes" or "No", I want to check the column if they are equal to "Yes". I have written a formula but it only works for 1 column at the minute, i not sure how to add the other columns into the formula:
=IF(P3="Yes","True")
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View Relatedhow to denote a cell as blank? I'm trying to do an IF formula for if the cell is blank.. Actually it would also work if the formula reads if the cell was NOT blank. Either one would work I just can't figure out the name of an empty cell. So I'm looking for this with the right word in the formula. =if(A1="blankcell",true,false)
View 2 Replies View RelatedI have one tiny qs which I hope someone can answer for me.
I need to allow a user to see a dropdown list (with options) only when the previous cell has the word "complete".
For example, cell B1 can have:
On going
Complete
Blank
If B1 has complete then I want the user to be able to select a number from a drop down list in C1 otherwise I want it to say "wait" or if its Blank to be [Blank].
I tried the Validation > Custom and put in
=IF(B1"Complete","Wait",OptionsList)
Where OptionsList is a defined list of 5->1 but this lot didnt work. I tried similar things in conditional formating but nothing again.
I have a worksheet with a cell range where the cells can be either logical TRUE or FALSE as a result of recalculations elswhere in the sheet. Only one cell in the range can ever be TRUE at any given time. For much of the time all cells in the range will have the status FALSE Each cell in the range has the same relative logical formula linking to values in other cells in the worksheet I need an event driven macro to find and move to any cell in the defined range if it changes status to TRUE No action is required when the status of the cell changes back to FALSE from TRUE
View 2 Replies View RelatedI have a credit card payment estimation sheet that i am trying to set up a cell that will display the same data as the last cell in columb A that the IF function displays true. I have attached a sample of what i have so far. Would like the data do display in the yellow cell with the red border. File is in Excell 2007 Format.
View 4 Replies View RelatedI'm looking for an IF function formulae.Currently, the IF function of my cell is =IF($A8=B$1,1,0), value if true=1 , if false= 0.
But how do I make the cell A8 ( MRT , Taxi ) show a true value of 1 ?
Becos MRT , Taxi is also under MRT, but I don't know how to make it a true value of 1.
I have a cell in Excel having a boolean value and want to use a macro to check if it is true. Something like this:
View 3 Replies View RelatedIf you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
If Not IsEmpty(ActiveCell.Value) And ActiveCell.Value >= 4050 Then
The code in the above if statement is running when I hit a cell with no contents. When there is no such cell, it works fine. I've tried using "" as well but the same thing happens.
I have some code for another project which was using checkboxes to select elements to copy/paste.
However, I need too many checkboxes and I think it is slowing down the run time.
I'm wondering if it's possible to have a cell act as a true/false checkbox?
Then I would just change my code from
if checkbox1.value = true then...
to
if range("A1").value = true then....
I have been looking through about 4 pages of these threads and searching the internet and can't seem to find my answer.
I am trying to count about 400 cells in column N if a different criteria is true in column M. The numbers in row N are a dollar amount, and the criteria in column M is the type of donor. I need to know how many donors there are of each type. The trick is that there are two other columns with dollar amounts for each donor, and I am also counting based on what event donors made gifts for.
Column M - Donor Type (designed by a letter "E", "A", or "P")
Column N - Annual Appeal (dollar amount by each donor)
Column O - Off-cycle (dollar amount by each donor)
Column P - Event (dollar amount by each donor)
I have a summary chart at the top of all this that should be able to tell me how many donors of type E donated for the Annual Appeal, how many donors of type E donated for the Off-Cycle, and how many donors of type E donated for the Event, etc based on donor type.
I've tried COUNTIF using multiple criteria, SUMPRODUCT, all kinds of things. Usually what happens is a get a #VALUE returned or the function counts the total number of donors by type (ie 269 E donors when what I want to know is how many of those donors donated to the Annual Appeal).
I am trying to make a sheet that I can make selections from a list of things on one worksheet and have the selections pull through to another worksheet. I have attached a mockup of the data, the ideal outcome and the logic is basically this:
If Cell A = Yes, then populate this cell with Column B Data
Repeating until ALL Cell A = Yes have been reviewed
I wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green
Here is the qtn if two cells A1 and A2 has "ab 1" and "ab 2" the answers for comparing cells should be true as both cells has first 2 letters as alphabets then space followed by numeric..format of cells is same.
View 2 Replies View RelatedIn the below link u will find each state driving license formats of ..example for alabama 7 Numeric..for ALASKA Up To 7 Digits..what am i looking is if we select a specific state and then insert any driving license of that state in next cell if the format matches i want that next cell to be true if not false ..wonder if we can create anything like this ..there are about 50 states with different license formats..
Can we write VBA for this .. [URL] .......
